ESD PROFI-SET TRENDY 2280 AND 2285 - Ridair/Brema

MASTER 3OOO SERVICE CASE
The indispensable pouch-style service case for the discerning engineer
3015
3000 Z MASTER with tool set
3010 Z MASTER with tool set, without gas solder
3015 Z MASTER without tool set
Description:
Elegant black grained leather case with all-round zip fastener, inside equipped with black perforated plates.
22 BERNSTEIN tools are clearly arranged on these plates fixed by clips and elastic ribbons .
In the empty case No. 3015 elastic ribbon and clips as well as a clip fastening device are attached for individual arrangement.
Outside dimensions: 245 x 130 x 60 mm (when closed)
Weight with tools: approx. 1.100 kg
Tool set:
No.
Description of individual tools
No.
Description of individual tools
12
2-291 Plastic magnifying glass, 30 mm Ø; 5 x magnification
3-131-1 Side cutters, 120 mm, for hard wire up to 0.8 mm,
for soft wire up to 1.5 mm, chrome-plated,
with BERNSTEINIT insulation
3-482-1 Snipe nose pliers, 140 mm, angular, with long jaws, slim model,
with compression spring, chrome-plated, with BERNSTEINIT insulation
3-565 Water pump pliers, 130 mm, chrome-plated
4-142 Screwdriver to DIN 5265, with special square pattern
BERNSTEIN handle, blade made from chrome vanadium,
chrome-plated, with black tip, 100 x 4 mm
4-271 Cross-recess screwdriver, Supadriv/Pozidriv, sice 0, with special
square pattern BERNSTEIN handle, blade made from chrome
vanadium, chrome-plated, with black tip, blade length 60 mm
4-273 Cross-recess screwdriver, Supadriv/Pozidriv, sice 2, with special
square pattern BERNSTEIN handle, blade made from chrome
vanadium, chrome-plated, with black tip, blade length 100 mm
4-311 Screwdriver for grub screws with plastic handle,
blade made from chrome vanadium, nickel-plated, 80 x 2.8 mm
4-331 Assembly screwdriver with plastic handle, nickel-plated blade,
45 x 6 mm, with special square pattern BERNSTEIN handle
4-391 Watchmaker's screwdriver, nickel-plated, with 4 interchangeable
blades 1.5, 2.0, 2.5 and 3.0 mm
5-107 Steel tweezers, with bent tips, 150 mm, nickel-plated
5-117 Steel tweezers, straight, flat and wide, 145 mm, nickel-plated
5-261 Contact file, 150 mm
5-301 Special sheet-metal scissors, serrated, extremely slim,
110 mm, nickel-plated
6-814 Wrench key, 2.0 A/F mm, angle-shaped, special steel, nickel-plated
6-815 Wrench key, 2.5 A/F mm, as above
6-816 Wrench key, 3.0 A/F mm, as above
6-817 Wrench key, 3.5 A/F mm, as above
6-995-10 Torx-wrench key, T 10, with bore hole, chrome vanadium, burnished
6-995-15 Torx-wrench key, T 15, as above
6-995-20 Torx-wrench key, T 20, as above
8-396 Gas-soldering-iron Portasol, 10 - 60 W,
maximum temperature up to 450° C