Bernstein catalogue - Ridair/Brema

TOOL CASE 5815
A case for an individual tool assortment
Description:
Tool case made from black grained imitation leather. The edges are reinforced with riveted ALU-profiles. The front side is variable closed with lateral
press locks and can be turned off when the cover plate is opened.
The bottom of the case is strengthened by an metal-profile. The metal front ledge protect the bottom tools when the front side is opened.
In front and back side are totally 17 pouches for arranging a tool assortment e. g. with pliers and screwdrivers. On both sides each one strap is riveted.
The case is suitable for small individual tool sets e. g. for apprentices in mechanic professionals.
The case has 2 locks.
Outside dimensions: 435 x 300 x 175 mm
Weight: ca. 2.750 kg
SERVICE TOOL ROLL 2401
The tool roll is made from a durable cotton canvas,
with separations for 24 tools
Weight : approx. 0.350 kg
2400 TV Service tool roll with 24 piece tool set
Weight with tools: approx. 1.700 kg
No.
Description of individual tools
No.
Description of individual tools
1-459 Adjusting screwdriver, 200 mm long, blade widths 3.5 and 5.0 mm
2-234 High voltage mains tester, 190 mm long
2-236 Tapping hammer
3-132-1 Side cutter, 130 mm, for hard wire, chrome-plated, insulated
3-205-1 Engineer’s flat pliers, 185 mm, box joint, chrome-plated, insulated
3-215-1 Engineer’s pliers, 180 mm, bent snipe nose, chrome-plated, insulated
3-225-1 Engineer’s precision pliers, 135 mm, snipe nose, chrome-plated, insulated
3-335-1 Adjusting pliers, 135 mm, straight, flat, wide, chrome-plated, insulated
3-565 Water pump pliers, 120 mm, chrome-plated
4-142 Engineer’s screwdriver to DIN 5265, with special square BERNSTEIN
handle, blade made from chrome vanadium, chrome-plated, 100 x 4 mm
4-143 Engineer’s screwdriver as above, blade 125 x 5.5 mm
4-144 Engineer’s screwdriver as above, blade 150 x 6.5 mm
4-222 Screwdriver extra long, blade 260 x 3 mm
4-311 Screwdriver for grub screws, blade C.V., 80 x 2.8 mm
4-408 Screw holder, nickel-plated, blade 200 x 4 mm
5-107-1 Steel tweezers with bent tips, 150 mm, nickel-plated
5-231 Flat file with handle
5-261 Contact file
5-301 Special sheet-metal scissors, serrated, extremly slim, 110 mm
6-105 Socket wrench, blade C.V., chrome-plated, 140 x 5.5 mm A/F
6-107 Socket wrench as above, blade 140 x 7 mm A/F
7-425 Dust brush
8-145 Soldering iron, 30 W, 220 V
8-401 Carded solder, approx. 1 m
39