Bathing

Swivelling Bath Seats
Bathing
1
1
Swivel Bather Wall Bracket
This wall bracket allows a Swivel Bather to be used on baths
with a narrow bath ledge on the wall side. It supports any of the
Swivel Bather range when the lip on the wall side of the bath is
less than the recommended 30mm (1 1 /4"). Also suitable for use
with other products requiring a ledge on the wall side,
eg. Bath boards. Length 560mm (22"). Weight 1.5kg.
AA1283 £50.42
Maximum
user weight
127
kg
20 st
2
NEW
2
Swivel Bather Seat Riser
Designed to increase the seat height of the Swivel Bather bath
seats to a more comfortable level, these risers are particularly
useful for baths with low sides, or for taller users who find the
seat too low. Also suitable for users with limited knee or hip
mobility as the raised seat allows easier transfer of legs over the
side of the bath. The Seat Riser bolts onto any Swivel Bather
base frame, but is not suitable for use with any other swivelling
bath seats.
Raise
100295 75mm (3") £56.03
100296 150mm (6") £61.91
3 Swivel Bather Arm Extender
The Swivel Bather Arm Extender increases the arm length of
the Swivel Bather seats to make it easier for people with limited
mobility to transfer onto the seat. It also gives better leverage,
making it easier to stand up from the seat after use. The arm
extender is particularly useful for people who find the distance of
the seat to the edge of the bath difficult to negotiate. Extends the
arm of the Swivel Bather by 150mm (6"). Arm height is raised by
40mm (1 1 /5"). The Arm Extender can be used with any Swivel
Bather seat, but is not suitable for use with any other swivelling
bath seats.
100292 £61.91
3
NEW
762
Fax: 08448 730 100
www.mobilisrolyan.com