12LW30/N - Beyma

12LW30/N
Nd LW30 S e r i e s
TECHNICAL SPECIFICATIONS
Nominal diameter
Rated impedance
Minimum impedance
Power capacity *
Program power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
MOUNTING INFORMATION
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
- Front mount
- Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
300 mm. 12 in.
8 ohms.
7.1 ohms.
450 w AES
900 w
96 dB 2.83v @ 1m @ 2π
35 - 5000 Hz
20 / 70 l 0.7 / 2.5 ft. 3
77 mm. 3 in.
3.13 kg. 6.88 lb.
17.9 N / A
0.066 kg.
17 mm.
8 mm.
30 mm.
312 mm. 12.28 in.
294.5 mm. 11.59 in.
277.5 mm. 10.93 in.
280 mm. 11.02 in.
147 mm. 5.79 in.
4 l 0.11 ft. 3
3.83 kg. 8.43 lb.
4.53 kg. 9.97 lb.
THIELE-SMALL PARAMETERS **
DIMENSION DRAWINGS
MATERIALS
• Voice coil: round copper wire with high temperature
bonding strength. Polyimide former able to withstand
high temperatures.
• Cone: high stiffness paper cone.
• Surround: treated cloth to assure good retaining of
elasticity in despite of continuing use.
• Spider: cotton spider.
• Metal parts: anti-corrosion coated to resist
aggressive environmental conditions.
• Basket: specially designed die cast aluminium basket
to avoid disturbing resonances.
• Magnet: high energy neodymium magnet.
Resonant frequency, fs
D.C. Voice coil resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd (m 2 )
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1 kHz
38 Hz
6.1 ohms.
6.6
0.3
0.29
109 l
267 µm / N
2.4 kg / s
2
0.0540 m 2
5 mm.
268 cm 3
1.4 mH
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the long
term parameters (once the loudspeaker has been working for a short period of time).
a c ú s t i c a b e y m a , s . a .
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·