SM118/N - Beyma

SM118/N
S M S e r i e s
TECHNICAL SPECIFICATIONS
Nominal diameter
Rated impedance
Minimum impedance
Power capacity *
Program power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
MOUNTING INFORMATION
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
- Front mount
- Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
460 mm. 18 in.
8 ohms.
7.4 ohms.
400 w AES
800 w
97 dB 2.83v @ 1m @ 2π
30 - 3000 Hz
60 / 150 l 2.12 / 5.3 ft. 3
77 mm. 3 in.
5 kg. 11 lb.
18.3 N / A
0.123 kg.
18 mm.
7 mm.
30 mm.
460 mm. 18.11 in.
438 mm. 17.24 in.
415 mm. 16.34 in.
412 mm. 16.22 in.
187 mm. 7.36 in.
7 l 0.26 ft. 3
7 kg. 15.43 lb.
8 kg. 17.63 lb.
THIELE-SMALL PARAMETERS **
DIMENSION DRAWINGS
MATERIALS
• Voice coil: copper round wire with high temperature
bonding strength. Apical former able to withstand
high temperatures.
• Cone: high stiffness paper cone.
• Surround: specially treated cloth surround.
• Spider: cotton spider.
• Metal parts: effective protection against corrosion.
• Basket: specially designed die cast aluminium basket
to avoid disturbing resonances.
• Magnet: high Curie temperature ferrite.
Resonant frequency, fs
D.C. Voice coil resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd (m 2 )
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1 kHz
36 Hz
6.4 ohms.
6.83
0.53
0.49
300 l
161 µm / N
4.1 kg / s
2.5
0.1150 m 2
5.5 mm.
630 cm 3
1.1 mH
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the long
term parameters (once the loudspeaker has been working for a short period of time).
a c ú s t i c a b e y m a , s . a .
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
· Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail: beyma@beyma.com ·