UKC 3-R - Suhner Abrasive Expert

The UKC 3-R from SUHNER
– ideal for stainless steel working
Precise work with the “long neck”
modern SUN-Press
high-performance abrasive
cowl
for your safety
Top results
Where conventional grinders come up against their limits is fast
and precise work thanks to the ergonomic design of this new
SUHNER “long neck”.
extremely manoeuvrable
with the “long neck”
New special grinder for working hard-to-reach fillet welds
The role of tools for stainless steel work is constantly gaining in
importance on the metal construction sectors.
A new, “long neck” angle grinder is the new member to the
SUHNER range of special tools for abrasive stainless steel working.
optimal on/off switch position
Field applications
The UKC 3-R was developed specifically for metal construction
and is extremely powerful thanks to its reduction gearing.
With its lightweight design of 1.8 kg and “long neck” of aluminium
the tool is a handy and pleasant workmate. This is supported in
addition by the extremely low angle head.
This makes the UKC 3-R ideal for work on confined fillet welds –
a problem zone that is frequently encountered e.g. on railings.
■ digital electronics with soft start
■ undervoltage protection
■ overload protection and speed regulation
■ 500 W output
■ continuously adjustable speed from 1,400 to 3,300 rpm
In tank construction
… all around pressure connectors
ergonomic case
for excellent holding
In metal construction
… in the corners
digital electronics for constant
working speed and maximum
protection for mechanical components
In railing construction
… all around the tube