AdvanceÂ® sections price list 5, effective from 30 May 2010 - Tata Steel

More documents

Recommendations

Info

Basis specification and quality extras 1 Basis specification and quality extras Note: In all references to specifications, Corus applies the most up-to-date version relevant at the time of order placement. 1.1 Quality Basis specification and quality extras Specification extras EN10025-2 Advance ® sections grade £ per tonne *S275JR *AdvanceS275JR Basis S275J0 AdvanceS275J0 25.00 S275J2 AdvanceS275J2 30.00 *S355JR *AdvanceS355JR 30.00 S355J0 AdvanceS355J0 40.00 S355J2 AdvanceS355J2 85.00 S355K2 AdvanceS355K2 110.00 *Verification of the specified impact value will not be carried out (see impact testing on page 13) EN10025-4 S355M POA S355ML section sizes upto 634kg/m POA S420M section sizes upto 634kg/m POA S420ML section sizes upto 634kg/m POA S460M section sizes upto 634kg/m POA S460ML section sizes upto 634kg/m POA Note Old specifications e.g. BS 4360 may be supplied, but this is subject to referral. 1.2 Other qualities Offshore EN10225 Minimum Charpy Extra £ yield strength V-notch temp per tonne S355G1 355 MPa -20ºC 85.00 S355G4 355 MPa -20ºC 90.00 S355G4+M 355 MPa -20ºC 90.00 S355G11 355 MPa -40ºC 125.00 S355G11+M 355 MPa -40ºC 125.00 S355G12 355 MPa -40ºC 135.00 S355G12+M 355 MPa -40ºC 135.00 Notes 1. The above basis price includes all mandatory quality extras. 2. The price extra includes marking to the standard. 3. Where customers require additional marking - price on application. 4. Where the customer specifies options within the standard, these will be subject to the manufacturer's acceptance, and price extras will be applied as appropriate. 5. Corus offers ultrasonic testing of all sections, as described on page 13. 6. Any third party inspectorates and/or ultrasonic testing and/or through thickness testing – price on application Shipbuilding Lloyd's Register Grade A Other qualities Extra £ per tonne Basis By arrangement 4
2 Basis prices The basis prices on page 6 to 10 apply to the following: Weight The standard weights are derived from the cross sectional area on the basis of 0.785 kg per cm 2 per metre length. The maximum weight of an individual bar is 15 tonnes. The weight to be charged will be the calculated weight based on the weight per metre (1 decimal point) as specified in BS4-1, EN10056-2 and the current Corus Advance sections brochure as appropriate, multiplied by the ordered length. Note The third element of the section designation is that detailed within the appropriate standard and should not be used to calculate or verify invoiced weights. Rolling tolerances All Advance sections are rolled to the tolerances in EN10279, EN10034, EN10056-2, BS4-1 and the current Corus Advance sections brochure as appropriate. Quality EN10025-2 Grade S275 JR, with the exception of Asymmetric Slimflor Beams (ASB) (Page 9). Quantity Each order or specification for a quantity of 10 tonnes and over, of one quality, one serial size of section and one thickness for one delivery to one destination. Tests Material will be tested in accordance with the relevant standard. One copy of the test certificate will be routinely supplied to the customer by Corus. Length Basis prices apply to lengths in the range 9,000 to 18,500mm in 100mm increments, except as indicated in section 3.2 on page 11. These lengths are offered to the tolerances as specified in the relevant product standards: BS4-1; EN10034; EN 10056-2, EN10279 and the current Corus Advance sections brochure as appropriate. Labelling and marking The brand identifier Advance is rolled into the web of all sections. 5
Page 1: Corus Long Products Advance ® sect
Page 6 and 7: Basic prices 2 Basis prices continu
Page 8 and 9: UKB & UKC 2 Basis prices continued
Page 10 and 11: UKPFC & UKA 2 Basis prices continue
Page 12 and 13: Other extras to basis prices 3 Othe
Page 14: Customer collection and certificate

AdvanceÂ® sections price list 5, effective from 30 May 2010 - Tata Steel

Create successful ePaper yourself

Delete template?

Save as template?