Flap Fittings - Hafele

Hinges and Flap Fittings
Flap Fittings
STARSTOP Flap stay with braking mechanism, adjustable braking effect
• Material: Flat arm and mounting bracket made of steel,
zinc alloy housing
• Finish: Nickel plated
• Version: 2-arms, with angular bracket, with perforated flat arm for
clamp
• Installation: Screw fixing
Braking effect
Adjusting the braking effect with the crew.
• Unscrew to increase braking effect
• Tighten screw to decrease braking effect
3
Installation
Dimension C
Determine dimension C by
trial mounting.
Information
The guide arm must be kept clean of oil, grease and cleaning agents.
Mounting Min. intern.
carcase
height mm
Packing: 1 or 10 pcs.
Length
L mm
Dim. A
mm
Dim. B
mm
Cat. No.
Left 332 176 214 90 365.55.615
460 241 310 90 365.55.655
556 292 374 155 365.55.695
Right 332 176 214 90 365.55.605
460 241 310 90 365.55.645
556 292 374 155 365.55.685
Flap
Base
Flap
We reserve the right to alter specifications without notice (SEA Furniture Fittings 2012).
Clamp for flap stays with braking mechanism with zinc alloy housing
• Area of application: To hold the flap closed
• For series drilled holes of: 28 or 37 mm
• Material: Plastic
• Installation: Direct fixing to flat arm of flap stay with braking effect
Colour
Cat. No.
Function
Black 365.67.360
The clamp is mounted onto the perforated flat arm
Packing: 1 or 200 pcs.
of the flap stay with braking mechanism. It clips
onto the guide arm when the flap is closed and
locks the flap in the closed position.
New products and systems: www.hafele.com
FF 3.125