Architectural Hardware Sliding and Folding Door Fittings - Hafele

Architectural Hardware
Sliding and Folding Door Fittings
Sliding door fitting Alu 80/a
• For 1- and 2-leaf sliding doors
• Height adjustable door leaves
• Self-cleaning and secure, force-free guidance through diagonal
runner surfaces
• Wall and ceiling assembly possible
• Track buffer with retainer
• Quiet running action
• Suitable for linear back-return VERTIKAL (see page 9.102)
• Tested to > 100,000 cycles (according EN1527)
Technical data
• Max. weight per door leaf 80 kg
Material
• Running track:
• Wall buffer:
• Floor guide:
Aluminium, clear anodized
Rubber, black
Plastic, grey
• Running gear with ball bearing and special plastic rollers
Fitting for 1-leaf sliding doors
Cat. No.
Set (without running track) 940.84.001
Section trolley hanger and floor guide
Running track, drilled
Dimension Required wall supports Material Finish Cat. No.
2,000 mm 6 pcs. Aluminium Anodized 940.84.200
3,000 mm 9 pcs. 940.84.300
4,000 mm 12 pcs. 940.84.400
6,000 mm 18 pcs. 940.84.600
9
Additional components
Order reference
Material Finish Cat. No.
Wall mounting bracket, 27.5 mm Steel Chromated 940.84.071
Wall mounting bracket, 41 mm Steel Chromated 940.84.072
Spring-loaded brake for running track Plastic Black 940.84.044
Catalogue numbers refer to 1 piece. Please specify required quantity when order individual parts.
For 2-leaf sliding doors are needed 2 sets of 1-leaf sliding door fittings. Please order running track and additional components separately.
We reserve the right to alter specifications without notice (SEA Basic 2008/09).
SEA 9.100
New products and systems: www.hafele.com