27.09.2014 Views

MSDS - Part 1 - Carpet Cleaning Equipment

MSDS - Part 1 - Carpet Cleaning Equipment

MSDS - Part 1 - Carpet Cleaning Equipment

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CONCROBIUM® MOLD STAIN REMOVER<br />

________________________________________________________________________________________________<br />

4. FIRST AID MEASURES<br />

Eye Contact<br />

Skin Contact<br />

Inhalation<br />

Ingestion<br />

Notes to Physician<br />

Flush eyes with water at least 15 minutes. Get medical attention if eye irritation develops or<br />

persists.<br />

Flush skin with large amounts of water. If irritation develops and persists, get medical attention.<br />

Remove person to fresh air. If signs/symptoms continue, get medical attention.<br />

Rinse mouth with water. Get medical attention immediately if symptoms occur.<br />

May cause allergic respiratory reaction.<br />

5. FIRE-FIGHTING MEASURES<br />

Flammable Properties<br />

Suitable Extinguishing Media<br />

Protective <strong>Equipment</strong> and<br />

Precautions for Firefighters<br />

Not flammable.<br />

Standard procedure for chemical fires. Foam. Water.<br />

As in any fire, wear self-contained breathing apparatus and full protective gear.<br />

6. ACCIDENTAL RELEASE MEASURES<br />

Personal Precautions<br />

Methods for Containment<br />

Methods for <strong>Cleaning</strong> Up<br />

Use only with adequate ventilation/personal protection. Avoid breathing dust or spray mist.<br />

Avoid formation of dust and aerosols. For personal protection see section 8.<br />

Prevent further leakage or spillage if safe to do so.<br />

Contain and remove spilled product by mechanical means or with a vacuum cleaner equipped<br />

with a high efficiency filter. Avoid formation of aerosol.<br />

7. HANDLING AND STORAGE<br />

Handling<br />

Storage<br />

Avoid breathing dust or spray mist. Use appropriate personal protection (see Section 8). Avoid<br />

contact with the product. Avoid the formation of aerosols and dust from dry product. Ventilate<br />

areas.<br />

Keep in a dry, cool and well-ventilated place.<br />

________________________________________________________________________________________________<br />

Issuing Date March 21, 2012 ANSI US Format<br />

Page 2 / 6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!