Download (PDF - 1.4 MB) - NBN Co

Parameter 1000BASE-LX 1000BASE-EX 10GBASE-LR 10GBASE-ER
Fibre) Fibre) Fibre) Fibre)
Connector Type SC-APC SC-APC SC-APC SC-APC
Launch Power (max)
(dBm)
-3 0 0.5 4
Launch Power (min)
(dBm)
-11.0 -4.5 -8.2 -4.7
Receiver Power (max)
(dBm)
-3 -3 0.5 -1
Receiver Power (min)
42 -19 -22.5 -10.3 (-14.4) -11.3 (-15.8)
(dBm)
Note that any reach indications provided by NBN Co from time to time are a guideline only and
Customer must calculate its own optical path loss budgets.
Where Customer is acquiring the Facilities Access Service from NBN Co, NBN Co recommends that
unless specified otherwise, any optical path loss budget calculations performed by Customer take
into account a maximum, additional, loss of 1dB that may be attributed to the operation of the
components of the Facilities Access Service.
NBN Co will use reasonable endeavours to advise of any other specific circumstances that it is aware
of which may impact these optical characteristics.
42 Stress eye sensitivity values are shown, sensitivity values shown in brackets are approx IEEE definition for informative use
only.
Page 60 of 77
28/08/2013 © 2013 NBN Co Ltd SFAA – Product Technical Specification for the NBN Co
Ethernet Bitstream Service