Safety Data Sheet Hardener - FINO

Safety Data Sheet
according to Regulation (EU) No. 1907/2006
FINOPASTE SH Hardener
Print date : 02.06.2008 15196
Page 4 of 8
Respiratory protection
If technical suction or ventilation measures are not possible or are insufficient, protective breathing
apparatus must be worn.
Respiratory Device (if insufficient ventilation occur).
Hand protection
Protective gloves PVC (Polyvinyl chloride).
Eye protection
Goggles.
Skin protection
Common occupational protective clothing.
9. Physical and chemical properties
General information
Physical state :
Colour :
Odour :
Paste
red
Mint
Important health, safety and environmental information
pH-Value : not applicable
Changes in the physical state
Melting point :
Boiling point :
Flash point :
Flammability
Solid :
Explosive properties
---
Lower explosion limits :
Upper explosion limits :
---
---
21 °C
---
---
---
Test method
ASTM D 56
Oxidizing properties
Concentration of inorganic, oxidising substances < 15 weight percentage (UN class 5.1, pack group I
/ II).
Vapour pressure :
---
Density (at 25 °C) :
0,98 g/cm³
Water solubility : insoluble
Solubility in other solvents :
dispersible hydrocarbons, aromatic. hydrocarbons, aliphatic.
Viscosity / dynamic :
Other information
Auto-ignition temperature
Solid :
Ignition temperature :
10. Stability and reactivity
Conditions to avoid
No special precautionary measures.
Materials to avoid
Oxidizing agents, strong.
GB - EN
---
oxidizing
---
Revision date : 11.04.2008