Safety Data Sheet Deep-drawing foils - FINO
Safety Data Sheet Deep-drawing foils - FINO
Safety Data Sheet Deep-drawing foils - FINO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Safety</strong> <strong>Data</strong> <strong>Sheet</strong><br />
according to Regulation (EU) No. 1907/2006<br />
<strong>FINO</strong>FLEX <strong>Deep</strong>-<strong>drawing</strong> <strong>foils</strong><br />
Print date : 18.09.2008 21237 / 21238 / 21239 / 21240 / 21241 / 21242 / 21243 /<br />
21244<br />
Page 3 of 5<br />
Protective and hygiene measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
"Wash hands when done working with material; at breaks, lunch, shift changes, etc."<br />
When using do not eat, drink or smoke.<br />
Respiratory protection<br />
During chipping of material a dust mask may be necessary.<br />
Hand protection<br />
Protective gloves NR (Natural rubber (Caoutchouc), Natural latex).<br />
Eye protection<br />
Wear goggles when chipping the material.<br />
Skin protection<br />
Not required.<br />
9. Physical and chemical properties<br />
General information<br />
Physical state :<br />
Colour :<br />
Odour :<br />
solid<br />
different, depending on colouration<br />
odourless<br />
Important health, safety and environmental information<br />
pH-Value : not applicable<br />
Changes in the physical state<br />
Melting point :<br />
Boiling point :<br />
Softening point :<br />
Flash point :<br />
Flammability<br />
Solid :<br />
Explosive properties<br />
Product is not explosive.<br />
Lower explosion limits :<br />
Upper explosion limits :<br />
--not<br />
applicable<br />
90 °C<br />
> 350 °C<br />
not applicable<br />
Vapour pressure :<br />
not applicable<br />
Density : 0,95 g/cm³<br />
Water solubility : insoluble<br />
Solubility in other solvents :<br />
easily soluble. chloroform<br />
Viscosity / dynamic :<br />
Other information<br />
Auto-ignition temperature<br />
Solid :<br />
Ignition temperature :<br />
10. Stability and reactivity<br />
Conditions to avoid<br />
No special precautionary measures.<br />
Materials to avoid<br />
Not known.<br />
GB - EN<br />
---<br />
---<br />
not applicable<br />
---<br />
Test method<br />
ASTM-D 1929-68<br />
not determined ASTM D 1929<br />
Revision date : 27.06.2008