Jung 2013/14 Catalogue

Rotary dimmer
Electronics
Ref.-no.
Rotary dimmer insert 100 – 1000 W
with 2-way push switch
211 GDE
Technical data
Rated voltage:
AC 230/240 V ~, 50 Hz
Connected load:
100 – 1000 W
Dimming method:
trailing edge phase control
Type of loads:
230/240 V incandescent lamps
230/240 V halogen lamps
Mixed loads of the specified types
Connection: screw terminals for wires up to 4 mm 2
Rotary dimmer insert 110 V / 60 – 400 W
with 2-way push switch
Technical data
Rated voltage:
Connected load:
Dimming method:
Type of loads:
Connection:
AC 110/127 V ~, 50/60 Hz
60 – 400 W
leading edge phase control
110/127 V incandescent lamps
screw terminals
244-110
• short-circuit proof
TRONIC rotary dimmer insert 20 – 360 W
with 2-way push switch
243 EX
Product characteristics
• Dimming method: trailing edge phase control
• Soft latching function
• Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
• Electronic overtemperature protection
• Satellite switching possible in combination with 2-way switch
• Suitable amplifiers: ULZ 1215 REG and 247 EB (max. 10)
When using 247 EB, charge dimmer with minimum capacity.
Technical data
Rated voltage:
AC 230/240 V ~, 50 Hz
Connected load:
20 – 360 W (flush-mounted)
20 – 320 W (surface-mounted)
Dimming method:
trailing edge phase control
Type of loads:
230 V incandescent lamps
230 V halogen lamps
TRONIC transformers
Mixed loads of the specified types
Connection:
screw terminals
49