Download Datasheet
Download Datasheet
Download Datasheet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Series 80 Mighty Mouse<br />
Backshells and Accessories<br />
Product Selection Guide<br />
Backshells<br />
section l series 80 accessory product selection guide<br />
Heat-Shrink Boots<br />
Page L-3<br />
Heat-Shrink Boots<br />
Use heat-shrink boots for strain relief and environmental protection. These<br />
boots fit all Series 80 connectors. Available in straight or 90° versions.<br />
Hex Nuts<br />
Page L-6<br />
Hex Nuts<br />
Mighty Mouse jam nut receptacles are supplied with low-profile spanner<br />
nuts. Optional hex nuts are available with safety wire holes.<br />
Flange Gaskets<br />
Page L-7<br />
Flange Gaskets<br />
Die-cut flange gaskets provide panel sealing for flange mount receptacles.<br />
Available in fluorosilicone, Viton® and conductive fluorosilicone.<br />
O-rings<br />
Page L-10<br />
Replacement O-rings<br />
Replace lost or damaged O-rings. Available in fluorosilicone, EPDM<br />
and conductive fluorosilicone, these O-rings fit Mighty Mouse jam nut<br />
receptacles.<br />
Strain Relief<br />
Clamps<br />
Page L-14<br />
Strain Relief Clamps<br />
These low profile clamps provide strain relief for wire bundles. These<br />
clamps are specially designed to minimize size and weight.<br />
EMI Adapters<br />
Page L-16<br />
Thread-on EMI Adapters for BAND-IT® Shield Termination<br />
Available with spin coupling or direct coupling, these adapters can be ordered<br />
in various diameters and lengths. Right angle and 45° versions are available.<br />
Shorting Shell<br />
Page L-12<br />
Backshell for Shorting or Switching Applications<br />
These direct coupled “shorting caps” are used to enclose jumper wires,<br />
resistors, or bussed wires.<br />
Environmental<br />
Backshells<br />
Page L-20<br />
EMI Backshells<br />
Page L-22<br />
Environmental Backshells<br />
These backshells are reduced in size compared to standard Glenair Series<br />
37 environmental backshells. Choose saddle clamp or compression nut.<br />
EMI Backshells<br />
These backshells are reduced in size compared to standard Glenair Series<br />
38 backshells. Choose saddle clamp or compression nut for strain relief.<br />
L<br />
Dimensions in inches (millimeters) and are subject to change without notice.<br />
© 2010 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.<br />
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912<br />
www.glenair.com L-1 E-Mail: sales@glenair.com<br />
01-JANUARY-2010
Change language