Solution Guide - Loctite

More documents

Recommendations

Info

Structural Bonding •l Two-component •l Bonds a wide variety of materials, e.g. wood, metals, hard plastics and glass •l Provides tough and resilient bonds •l Yields high shear and peel strength What product performance is required? Handy Hints: • Degrease, clean and dry surfaces prior to applying the adhesive – use Loctite ® 7063 (See Cleaning on page 30/31) • If the adhesive cures slowly, clamping during cure is advised Bonding of PP, PE or a combination of both Bonding of Metals, ceramics, ferrite and glass General purpose Solution 3030 326 / 7649 3421 A&B Description Acrylic Acrylic (no mix) Epoxy Working life 3 min. – 180 min. Fixture time
Five-minute Toughened High temperature 330 / 7388 3430 A&B 3450 A&B 9466 A&B 9492 A&B MULTI-BOND ® Acrylic (no mix) Epoxy Epoxy Epoxy Epoxy – 4 min. 4 min. 60 min. 15 min. 5 min. 12 min. 12 min. 180 min. 75 min. Light amber Ultra clear Grey Off-white White 67.5 Pa·s 25 Pa·s 35 Pa·s 30 Pa·s 30 Pa·s -55 °C to +100 °C -55 °C to +100 °C -55 °C to +100 °C -55 °C to +120 °C -55 °C to +180 °C 50 ml / 40 ml kit, 315 ml cartridge 24 ml twin syringe, 50 ml, 200 ml, 400 ml dual cartridges 25 ml twin syringe 50 ml, 400 ml dual cartridges, 1 kg can 50 ml, 400 ml dual cartridges 1 kg can 97002, 97040 96001, 97042, 96003, 983437, 983438, 983439 n.a. 96001, 97042, 983438, 983439 96001, 97042, 983438, 983439 Loctite ® 330 / 7388 Loctite ® 3430 A&B Loctite ® 3450 A&B Loctite ® 9466 A&B Loctite ® 9492 A&B • Toughened adhesive • Fast curing • Good impact resistance • Ideal for bonding metals and dissimilar substrates, including plastics, like PVC, phenolic and acrylic Loctite ® 330: P1 NSF Reg. No.: 123005 • Ultra clear • Toughened • Water resistant • Ideal for bonding glass, decorative panels and displays as well as general repair applications • Grindable • High strength • Ideal for bonding and filling damaged components • Extended working life • High strength • Toughened • Ideal for bonding a wide variety of substrates like metals, ceramic and most plastics • Excellent chemical resistance • High temperature resistant • Good hot strength • For bonding and potting a wide variety of substrates exposed to higher temperatures e.g. heaters and electronic components 21
Page 1 and 2: Solution Guide Issue 6
Page 3 and 4: Table of Contents 4 10 12 14 16 18
Page 5 and 6: Bearings, Bushes, Shafts, Cylindric
Page 7 and 8: Cleaning Parts and Hands • Cleani
Page 9 and 10: Best Practice • Reduce routine ma
Page 11 and 12: No What strength do you require? Me
Page 13 and 14: Metal Are the threads fine or coars
Page 15 and 16: No What gap must the sealant fill?
Page 17 and 18: No Up to 230 °C What operating tem
Page 19: No Is the gap over 0.1 mm? Do you r
Page 23 and 24: No Do you require high temperature
Page 25 and 26: Elastic bonding General purpose Rap
Page 27 and 28: Aluminium Metalllic components subj
Page 29 and 30: Fine particle Chemical attack Resis
Page 31 and 32: Parts, machines and surface cleaner
Page 33 and 34: Threadlocking, Pipe and Thread Seal
Page 35 and 36: Oil Chain lubricant Freeing parts S
Page 37 and 38: High performance Special purpose Hi
Page 39 and 40: Standard applications Copper Anti-S
Page 41 and 42: Emergency Repair Products O-Ring Re
Page 43 and 44: Loctite ® equipment solutions Loct
Page 45 and 46: Maintenance Workshop The Maintenanc
Page 47 and 48: Industrial centrifuges, used to sep
Page 49 and 50: Most shaft assemblies run in harsh
Page 51 and 52: Product No. Description Pack size I

Solution Guide - Loctite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?