Pre-start, Walk-around Inspection for Motor Graders
Pre-start, Walk-around Inspection for Motor Graders
Pre-start, Walk-around Inspection for Motor Graders
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Page 2 The Bridge Fact Sheet January/March 1995<br />
Keep the cover of the circle turn gear clean. This will allow the<br />
breather to function properly.<br />
Check clearance of the drawbar ball and socket. Look <strong>for</strong><br />
excessive free-play. Adjust if necessary.<br />
Hoses should be checked daily. Hydraulic hose failure is a major<br />
cause of motor grader breakdown.<br />
Check <strong>for</strong> hoses that touch other hoses. Hose contact causes<br />
abrasion that will eventually lead to failure.<br />
Loose hoses are a breakdown waiting to happen. Hydraulic<br />
hoses that have been added to the machine must be of the proper<br />
pressure rating and secured to the frame with clamps or brackets.<br />
Hoses that have been replaced must be the proper length and<br />
secured in the same way as the originals.