Falcon Jan 2011 Pricebook.pdf - Access Hardware Supply

Miscellaneous Information
LOCKS FOR THICK DOORS
Many Series of Falcon locks are available for doors over 1-3/4" thick. Consult the options section for each series for available door
thicknesses and charges.
LEAD-LINING OR LEAD-WRAPPING
T and RU Series locksets and latchsets are available lead-lined. MA Series locksets are available lead-wrapped. Consult the options
section for each series for availability and charges.
ABRASIVE COATING AND KNURLING
Abrasive coated or knurled knobs or levers are available for most Falcon locksets and latchsets. Consult the options section for each
series for availability and charges.
MOUNTED LOCK SAMPLES
Individual mounted samples are available for all lock series. The samples are mounted on a mount block and are fully operative thus
allowing demonstration of each functions’ individual features. There is a nominal charge for the mount block. There is no charge for
mounting of the hardware. See MSC-11 for mount selection.
SET OF FINISH SAMPLES
One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain.
Finishes Included: 605, 606, 613, 625, 626 & 630 Contact your SSC representative for availability
COMPETITORS’ KEYWAYS
A selection of standard keyways of other lock manufacturers is available as listed below (6-pin only). Consult options sections of
each series for availability. (Not available in any mortise and rim cylinders, except Schlage C, or factory master keyed.)
Furnished 0-Bitted unless otherwise specified.
Manufacturer Keyway Keying Options
60 O Bitted, KD
Corbin Russwin
L4
O Bitted, KA4
Russwin
D1
O Bitted, KD
Sargent LA O Bitted, KD
C
O Bitted, KD, KA4
Schlage
E
O Bitted
Yale 8 (Para) O Bitted, KD
INTERCHANGEABLE CORES
The “A” keyway is standard for IC products and will be supplied unless otherwise specified. A, B, C, D, DD, E, F, G, H, J, K, L, M,
N, Q, R, TB, TD are equivalent to Best and Arrow IC keyways of the same names. Consult IR Mechanical Safety Customer Service
for restricted keyways not listed here. Conventional cylinders are not compatible with interchangeable core.
COMPETITORS’ CORES
Falcon standard IC preps accept Arrow (including Flex-Core), Best (including PKS and Peaks), InstaKey, Kaba Peaks, Keymark and
KSP cores. Other brands of interchangeable cores are compatible with T and RU Series locksets. See those sections for details.
CONVENTIONAL CYLINDERS
The “G” keyway is standard for conventional cylinder products and will be supplied unless otherwise specified. E, H, K, L, N and P
are also available. Consult IR Mechanical Safety Customer Service for restricted keyways and other keyways not listed here.
* Interchangeable core not compatible with conventional cylinders
2
Price Book 108
Effective January 31, 2011 • Rev. 1/11