Cables Catalog.pdf - Drive Products

• Heavy Duty: 3, 4, 6 Series threaded end rods.
• Applications: throttle, choke, engine stop, fuel
shut-off, latches.
• Temperature Range:
–65 to +225°F / –54 to +107°C Std.
–65 to +300°F / –54 to +149°C HEFT 2
• Wide variety of Handles & Knobs
HEAVY DUTY 3 SERIES
Choice of Core Type
HP Core – polymer coated 1 x 7
Solid .075 stainless steel core
Specifications
Travel DIM ”AA” Bulkhead End Clamp End Operating Loads
DIM ”A” DIM ”B” DIM ”C” DIM ”D” Push Pull
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Lbs./(N) Lbs./(N)
1.0 4.50 3.00 4.94 2.31 4.25 60 60
(25.4) (114.3) (76.2) (125.5) (58.7) (108.0) (267) (267)
2.0 4.50 4.00 6.94 3.31 6.25 60 60
(50.8) (114.3) (101.6) (176.3) (84.1) (158.8) (267) (267)
3.0 4.50 5.00 8.94 4.31 8.25 60 60
(76.2) (114.3) (127.0) (227.1) (109.5) (209.6) (267) (267)
4.0 6.50 6.00 10.94 5.31 10.25 60 60
(101.6) (165.1) (152.4) (227.9) (134.9) (260.4) (267) (267)
5.0 6.50 7.00 12.94 6.31 12.25 45 60
(127.0) (165.1) (177.8) (328.7) (160.3) (311.2) (200) (267)
HEAVY DUTY 4 SERIES
HP Core
1/4 ” - 28 Threaded rod (output end)
Specifications
Travel DIM ”AA” Bulkhead End Clamp End Operating Loads
DIM ”A” DIM ”B” DIM ”C” DIM ”D” Push Pull
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Lbs./(N) Lbs./(N)
1.0 5.19 3.13 5.19 2.50 4.56 120 120
(25.4) (131.8) (79.5) (131.8) (63.5) (115.8) (534) (534)
2.0 5.19 4.13 7.19 3.50 6.56 120 120
(50.8) (131.8) (104.9) (182.6) (88.9) (166.6) (534) (534)
3.0 5.19 5.13 9.19 4.50 8.56 120 120
(76.2) (131.8) (130.3) (233.4) (114.3) (217.4) (534) (534)
4.0 7.19 6.13 11.19 5.50 10.56 100 120
(101.6) (182.6) (155.7) (284.2) (139.7) (268.2) (445) (534)
5.0 7.19 7.13 13.19 6.50 12.56 75 120
(127.0) (182.6) (181.1) (335.0) (165.1) (319.0) (334) (534)
HEAVY DUTY 6 SERIES
HP Core
5/16” - 28 Thread (output end)
Building a Part Number
Cable Series:
3,4,6
Cable Travel:
1,2,3,4,5
Handle Type/Legend I.D.
Cable Type
0 Solid Core (3 Series Only)
1 Hi-Performance (Standard)
3 HEFT 2 (Hi-Performance & High Temperature)
Metric – see pg. 2
Overall Length
In Inches
(mm when M
prefix is used)
Conduit Fitting Type:
Bulkhead - 2
Clamp - 3
Specifications
Travel DIM ”AA” Bulkhead End Clamp End Operating Loads
DIM ”A” DIM ”B” DIM ”C” DIM ”D” Push Pull
Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Inch/(mm) Lbs./(N) Lbs./(N)
1.0 5.19 3.25 5.50 2.56 4.81 225 225
(25.4) (131.8) (82.6) (139.7) (65.0) (122.2) (1001) (1001)
2.0 5.19 4.25 7.50 3.56 6.81 225 225
(50.8) (131.8) (108.0) (190.5) (90.4) (173.0) (1001) (1001)
3.0 5.19 5.25 9.50 4.56 8.81 210 225
(76.2) (131.8) (133.4) (241.3) (115.8) (223.8) (934) (1001)
4.0 7.19 6.25 11.50 5.56 10.81 170 225
(101.6) (182.6) (158.8) (292.1) (141.2) (274.6) (756) (1001)
5.0 7.19 7.25 13.50 6.56 12.81 130 225
(127.0) (182.6) (184.2) (342.9) (166.6) (325.4) (578) (1001)
Felsted Brand Cable Products Are Available Through A Network Of Local F.A.S.T. ® Cable Assemblers
www.orschelnproducts.com
8