UK Richlite Fabricator Survival Guide V06152011.pdf
UK Richlite Fabricator Survival Guide V06152011.pdf
UK Richlite Fabricator Survival Guide V06152011.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Fabricator</strong> <strong>Survival</strong> <strong>Guide</strong><br />
TOOLING<br />
EQUIPMENT<br />
Saw Blades<br />
• Festool Special Saw Blade 160x2, 2x20 TF48<br />
• For curves: Jigsaw Blade Festool Jigsaw Blade H575/3 B1/5<br />
Routers<br />
• 3 ¼ Horsepower minimum<br />
• Variable speed<br />
• A straight bit—solid carbide<br />
• An assortment of various profiles<br />
• OF 2200 EB - Plus GB 240V #574275<br />
Clamps<br />
Traditional mechanical screw type and vacuum clamps. Screw clamps are required to ensure a<br />
good bond with structural epoxies.<br />
Drill<br />
• Pilot holes for pan head sheet metal screws<br />
• For larger holes use bi-metal hole saw or carbide-tipped hole saw. Can be used but<br />
tend to wear out quickly due to heat build up. Routing is preferable to hole saws for<br />
thick material and large holes.<br />
• For small holes use titanium or cobalt bits<br />
Biscuit Cutter<br />
DW 3751-5 minimum power- 6.5 amps<br />
14
Change language