Example

Design Tips
Construction details / warranty
Keep water out to prevent corrosion.
Use uninterrupted combined EMI / water seals.
Windows / displays with mesh or conductive transparant
foil, depending on frequencies/attenuation.
rigidity of the construction
rigid
weak
Use connector gaskets for low-impedance coupling to the enclosure.
moulded and double flanged
machined parts edges
flat sheets
single flanged
edges
O-profiles
solid O-profile
neoprene foam core
3 mm
indicative gasket selection graphic
Amucor shield 6800
6x1 mm
8x2 mm
PVC foam core
8x4 mm
10x10 mm
8x6 mm
9x3 mm
for customer-specific gaskets,
contact our product specialists
V-shape gaskets
Ultra Soft Shield 7400
PU foam core
9x6 mm
9x8 mm
9x9 mm
9x6 mm
9x3 mm
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
distance between fixings (m)
Shapes and dimensions according to your specifications
without tooling costs.
For ventilation use honeycombs with an EMC gasket.
Sometimes only
a single
component
needs to be
shielded.
Type of gasket /dimension
Warranty
All INFRATRON products are
continuously checked during the manufacturing
process. Therefore all our products can be
considered quality products, free of
manufacturing errors.
The technical data of our products are based
on research and should only be regarded as a
guideline for the different applications. Due to
the wide range of products and the large
variety of applications the technical data are
never to be interpreted as a guarantee.
It is the buyer’s responsibility to test whether
the product meets the desired requirements.
In the event that, unexpectedly, defects should
be found in our products, INFRATRON
will investigate and replace these
products as soon as possible.
INFRATRON cannot be held
responsible for any delays that might ensue.
5