plaquette MACHLINE - Ntn-snr.com
plaquette MACHLINE - Ntn-snr.com
plaquette MACHLINE - Ntn-snr.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MachLine ® selection guide<br />
Our MachLine range has been designed for spindle applications for most machine<br />
tools: lathes, milling and drilling machines, center bores, grinders, high speed<br />
spindles, etc. Their capacity to support operating constraints - cutting and drive<br />
forces - and their high rotation speeds have been optimized for the following criteria:<br />
rotational accuracy, dimensional stability, geometrical micro and micro variations,<br />
rigidity, heat, vibration and service life.<br />
Features of angular contact bearings<br />
- Very high quality 100Cr6 steel rings and balls,<br />
- Two contact angles: 15° and 25° (17° and 25° for<br />
MachLine ML and MLE range),<br />
- Laminated resin cage centered on outer ring (Bronze<br />
or PEEK cage on request),<br />
- Three preload grades (specific preloading on request),<br />
- Standard precision P4S: ISO4 (ABEC 7) for<br />
dimensional characteristics and ISO2 (ABEC 9) for<br />
all dynamic characteristics. It is also possible to<br />
supply products with ISO 2 precision.<br />
With our manufacturing know-how we can align the preloaded outer ring and inner ring<br />
with very high precision, guaranteeing offset of less than 2µm.<br />
This non-standardized characteristic determines the preload value, which has a significant<br />
influence on spindle rigidity and behavior.<br />
Comparison of internal geometry<br />
Standard<br />
ML<br />
- MachLine High Speed – ML: Speeds 30 % faster<br />
than the standard range are achieved using an<br />
increased number of balls with reduced diameter<br />
and improved cage guidance on the outer ring.<br />
ML and MLE bearings characteristics<br />
are laid out on page 48,<br />
and CH characteristics on page 30.<br />
- MachLine Sealed – MLE: Performance values<br />
at speeds <strong>com</strong>parable to a standard bearing<br />
lubricated with oil are achieved with grease<br />
lubrication by using non-contact seals on ML<br />
range bearings.<br />
Standard MachLine MachLine Etanche Hybride (bille céramique)<br />
MLE<br />
- MachLine Hybrid – CH: Bearing performance can<br />
be further enhanced by using ceramic balls instead<br />
of steel balls.<br />
hLine MachLine Standard Etanche Hybride MachLine (bille céramique)<br />
MachLine Etanche Hybride (bille céramique)<br />
CH<br />
28