3D Work- and Welding Table D28 - 3 Weld sro
3D Work- and Welding Table D28 - 3 Weld sro
3D Work- and Welding Table D28 - 3 Weld sro
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Description Technical Description Part Number<br />
Swing Clamp 180°<br />
– Reach is adjustable, but no differential compensation<br />
– Can be used as horizontal swing clamp without vertical tube<br />
– Reach of 50 – 175 mm adjustable<br />
– Each tube can be used individually, too<br />
220 mm<br />
Adjustable<br />
Patented<br />
Swing Clamp 180° with Clamping Screw<br />
The most “universal” – optimal for small lot sizes<br />
Vertical Tube 220 mm long<br />
Vertical Tube 350 mm long<br />
<strong>D28</strong>-07005-000<br />
<strong>D28</strong>-07005-014<br />
220 / 350 mm<br />
LENGTH | WIDTH | HEIGHT | WEIGHT<br />
220 – 350 mm approx 270 mm – approx 1.8 – 1.9 kg<br />
Adjustable<br />
Patented<br />
Swing Clamp 180° with Toggle Clamp<br />
The most “economical”,<br />
– Quick <strong>and</strong> full force clamping by moving the lever<br />
approximately 150°<br />
– No interference because the lever pivots 360°<br />
Vertical Tube 220 mm long<br />
Vertical Tube 350 mm long<br />
<strong>D28</strong>-07005-001<br />
<strong>D28</strong>-07005-015<br />
LENGTH | WIDTH | HEIGHT | WEIGHT<br />
220 – 350 mm approx 270 mm – approx 2.1 – 2.2 kg<br />
Adjustable<br />
Patented<br />
Swing Clamp 180° with Short Screw<br />
The “smallest”<br />
– Operated with SW 14 hex wrench or open-ended wrench<br />
– Especially recommended for use where space is tight<br />
Vertical Tube 220 mm long<br />
Vertical Tube 350 mm long<br />
<strong>D28</strong>-07005-002<br />
<strong>D28</strong>-07005-016<br />
LENGTH | WIDTH | HEIGHT | WEIGHT<br />
220 – 350 mm ca. 270 mm – approx 1.7 – 1.8 kg