msds sigmashield 1200 hardener - SIGMA PAINTS

SAFETY DATA SHEET
This safety data sheet is prepared in accordance with EU directive 91/155/EC amended by directive
2001/58/EC.
SIGMASHIELD 1200 (SIGMA NOVASHIELD) HARDENER
MSDS EU 01 / EN Version 1 Print Date 3/28/2007
Revision date 16-03-07
The information contained in this safety data sheet is based on the present state of knowledge and current European and
National legislation at the date of issue. The supplier reserves the right to modify data on the safety data sheet without
further notice. Any change in data will normally be followed by the issue of a new safety data sheet. The user should
check the date of issue and if more than 12 months have elapsed, then the data should only be used after checking with
the nearest sales office of the supplier to establish that the data is still valid. As the specific conditions of use of the
product are outside the suppliers control, the supplier is not reponsible for the (negative) consequences of these specific
conditions of use, which are outside of the suppliers. control and which are not compliant with the handling, storage
and other instructions in this safety data sheet.
After all component(s) stated on the relevant Technical Data Sheet have been mixed the safety precautions mentioned
on each of the component(s) safety data sheets and labels should be used in assessing the safety precautions of the
mixed product.
For further information see technical data sheet number: 7744
8/8