country stoves firestar gas insert - Inglenook Energy Center
country stoves firestar gas insert - Inglenook Energy Center
country stoves firestar gas insert - Inglenook Energy Center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPECS<br />
Options and Specifications for Gas Fireplace Insert<br />
THESE SPECIFICATIONS ARE FOR REFERENCE ONLY. DO NOT USE FOR INSTALLATION.<br />
Gas Insert Options:<br />
FireStar <strong>insert</strong>s are available with your<br />
choice of 24K gold or nickel plated<br />
door or trivet. Black door and trivet<br />
are standard.<br />
Available Insert Surround Flanges:<br />
(Includes gold or nickel trim) overall sizes<br />
Able to be sheared to accomodate<br />
arched fireplaces or custom inside<br />
fits. Ask your Country Stove Dealer<br />
for details.<br />
• 29”H x 41”W (standard)<br />
• 29”H x 48”W<br />
• 33”H x 41”W<br />
• 33”H x 48”W<br />
Features:<br />
▲ All stainless steel heat exchanger<br />
▲ Drop down viewing door<br />
▲ Top trivet for cooking or steaming<br />
▲ Easy access controls<br />
▲ Triple burner design<br />
▲ Captivating fire<br />
▲ Standing pilot millivolt system<br />
SPECIFICATIONS<br />
NATURAL GAS LP GAS<br />
HEATING CAPACITY<br />
900 to 2,000 sq. ft*<br />
BTU INPUT RANGE/HR<br />
27,500 to 22,600 to<br />
39,000 BTU’s/hr 39,000 BTU’s/hr<br />
STEADY STATE EFFICIENCY**<br />
80% / 84% 80% / 84%<br />
INSERT BLOWER<br />
150 CFM variable speed (included)<br />
VENT PIPE<br />
4”<strong>gas</strong> rated B-Vent or listed singlewall<br />
<strong>gas</strong> vent chimney liner<br />
POWER OUTAGE OPERATION<br />
YES<br />
ZERO CLEARANCE (Metal)<br />
AND MASONRY FIREPLACE<br />
APPROVED<br />
See fireplace cavity requirements<br />
* Heating capacity performance depending<br />
on installation, climate conditions, and home<br />
insulation value.<br />
** Efficiency varies slightly with various pipe<br />
configurations.<br />
This appliance must be installed in<br />
accordance with local building codes.<br />
In the absence of local codes use<br />
ANSI Z223.1. This appliance has been<br />
tested in accordance with ANSI Z21.88<br />
1998 for Gas Fireplace Heater by OMNI<br />
Test Laboratories, INC.<br />
FIRESTAR GAS INSERT FEATURES:<br />
1. ALL STAINLESS STEEL HEAT<br />
EXCHANGER<br />
Durable stainless steel<br />
tubes provide maximum<br />
efficiencies with or without<br />
a blower.<br />
2. DROP DOWN VIEWING DOOR<br />
For easy cleaning.<br />
3. TOP TRIVET<br />
For steaming or cooking.<br />
4. EASY ACCESS CONTROLS<br />
Conveniently located for<br />
user-friendly operation.<br />
Thermostat or remote<br />
compatible valve.<br />
Thermostat<br />
Remote<br />
INSTALLATION CLEARANCES AND REQUIREMENTS:<br />
*NOTICE: These specifications are for reference only and shall not be used for actual<br />
installation. Use installation instructions for actual installation.<br />
29.75''<br />
19''<br />
19''<br />
15.25''<br />
Hearth Extension<br />
Hearth Height<br />
Heat<br />
Exchanger<br />
Side Wall<br />
INSERT MINIMUM FIREPLACE CAVITY<br />
Masonry fireplace installation & Zero<br />
Clearance (metal) installation. Approval to<br />
remove side and rear bricks for zero<br />
clearance installations only.<br />
YOUR AUTHORIZED COUNTRY STOVES DEALER<br />
Side Facing<br />
6.5''<br />
11''<br />
14.5''<br />
24''<br />
46''<br />
or<br />
44''*<br />
36.5''<br />
or<br />
34.5''*<br />
MINIMUM CLEARANCES TO COMBUSTIBLES<br />
*When not using standard 2” bottom trim piece.<br />
‡‡ Combustible Mantle clearance may be reduced<br />
with use of a mantel shield.<br />
See owners manual for details.<br />
Insert Hearth Protection:<br />
Minimum Hearth Protection 3/8” thick non-combustible material or equivalent<br />
Non-Combustible Hearth Extentension -<br />
Standard Installation with use of 2” bottom trim piece installed under <strong>insert</strong><br />
Hearth Height 3/8” Min. 2” 3” 4”<br />
Hearth Extension 20” 17” 17” 0”<br />
Hearth Width (minimum) 33-1/2”<br />
* Note: Inset protrudes 9-7/8” in front of flange. Insert front supports are available for use with<br />
installations into zero clearance fireplaces. See owners manual for hearth clearances and<br />
installation details when not using standard 2” bottom trim piece under <strong>insert</strong>. Always use owners<br />
manual for hearth planning and installation<br />
COUNTRY STOVES, INC.<br />
P.O. Box 959, Auburn, WA 98071-0959<br />
www.<strong>country</strong><strong>stoves</strong>.com<br />
5. TRIPLE BURNER DESIGN<br />
For realistic flame<br />
pattern and glowing<br />
embers.<br />
6. CAPTIVATING FIRE<br />
With glowing ceramic<br />
fiber logs and embers to<br />
create warmth and<br />
ambiance with the most<br />
realistic split wood logs<br />
available.<br />
7. STANDING PILOT MILLIVOLT<br />
SYSTEM<br />
Insert operates even<br />
during a power outage.<br />
Shown with<br />
black painted door<br />
and 24K gold bars<br />
COMBUSTIBLE MANTEL<br />
COMBUSTIBLE TOP FACING<br />
FIRESTAR – The <strong>gas</strong> stove hand-crafted with the Country legacy<br />
of quality, efficiency and innovation.<br />
1<br />
2<br />
6<br />
3<br />
Shown with<br />
nickel plated door<br />
and nickel bars<br />
13-5/8''<br />
(34.9cm)<br />
Blower<br />
Power<br />
Cord<br />
20''<br />
(50.8cm)<br />
2'' (5.1cm)<br />
INSERT DIMENSIONS:<br />
9-7/8''<br />
(25.1cm)<br />
COUNTRY SIGNATURE STOVES<br />
These are not assembly line produced<br />
heaters, but premium handcrafted<br />
appliances. Each FireStar is constructed<br />
almost entirely by a single craftsman, giving<br />
the builder a special pride and responsibility<br />
in workmanship – assuring you of the best<br />
built <strong>gas</strong> room heater available.<br />
26-3/4''<br />
(67.9cm)<br />
33-1/2''<br />
(85.1cm)<br />
(TOP VIEW)<br />
9-3/8''<br />
(23.8cm)<br />
(SIDE VIEW)<br />
5<br />
11-3/8''<br />
(28.9cm)<br />
4''<br />
Diameter<br />
7<br />
4<br />
18-7/8''<br />
(48.1cm)<br />
13-5/8'' (34.9cm)<br />
Leveling Bolt<br />
MADE<br />
IN THE<br />
U.S.A.<br />
Gas Inlet<br />
(3/8'')<br />
9-7/8''<br />
(25.1cm)<br />
20-3/8''<br />
(51.7cm)<br />
© 2002 Country Stoves, Inc.<br />
S/W Design #105530 11/2002<br />
30M