S I G N A T U R E - Mazer Yachting

Principle Dimensions
S I G N A T U R E
Moulded Hull Length 42.5 ft 13.3 m
Waterline Length 36.5 ft 11.2 m
Length Overall 43.5 ft 13.3 m
Draft 3.9 ft 1.2 m
Beam 14.3 ft 4.30 m
Air Draft (mast down) 11.5 ft 3.5 m
Displacement (light) 13.8 tons 14,000 kg
“Engine room shames boats
twice its size” MOTOR BOATS AND YACHTING
The Trader 42 Signature has been designed to give years
of boating pleasure, delivered through a commitment
to quality that runs through the design, engineering and
manufacture of each craft.
Each 42 is manufactured at a purpose-built
waterfront facility in Zhuhai, China from Trader moulds
and supervised by our Production Manager in the
Far East. Every boat is sea trialled and comprehensively
tested before leaving the yard.
While the craftsmanship is traditional, the
manufacturing techniques and materials are bang up to
date. The Trader 42 Signature hull was extensively tank
tested in the UK, and her composite structure engineered
to the exacting standards of the RCD Category A by High
Modulus.
The systems have been developed in partnership
with some of the biggest names in recreational boating,
including Cummins, Mastervolt and Raymarine. This
integrated approach to ensures greater reliability, and
better service for the owner.
Comprehensively specified, and enhanced with a
selection of personalisation options, each Trader 42
is delivered turn-key. After just a little familiarisation,
her new owners will be all set to start out on their first
voyage together.
Capacities
Fuel 450 US gall 1,700 lt
Fresh water 160 US gall 600 lt
Calorifier 20 US gall 75 lt
Holding Tank 66 US gall 250 lt
Batteries (engine start) 200 a.H.
Batteries (service)
400 a.H.
Engines
380HP (2 x Cummins QSB5.9)
RCD Category A
Dimensions, capacities and features listed for standard boat. Displacement
is affected by optional equipment, owner’s gear and crew on board.