Marksman⢠Duo-Fine® Series Filter Elements - Pall Corporation ...
Marksman⢠Duo-Fine® Series Filter Elements - Pall Corporation ...
Marksman⢠Duo-Fine® Series Filter Elements - Pall Corporation ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Data Sheet 1265-1C<br />
Marksman <strong>Duo</strong>-Fine ® <strong>Series</strong><br />
<strong>Filter</strong> <strong>Elements</strong><br />
High Capacity Pleated Glass <strong>Filter</strong> <strong>Elements</strong><br />
• New, Larger Cartridge Geometry<br />
• High Flow Capacity<br />
• Inside-Out Flow Traps Contaminant Inside The Element<br />
• Available To Fit Most Size 1 and Size 2 Bag Housings<br />
With No Hardware Changes<br />
• Available in 40" (102 cm) for use in Unique 40" (102 cm)<br />
Marksman Housings<br />
• Unique Sealing Device Adjusts To Fit In Most Bag <strong>Filter</strong><br />
Housings<br />
• High Surface Area For Long Service Life<br />
• Polypropylene End Caps, Glass Media (with acrylic<br />
binder) and Polyester Support and Outer Netting<br />
• Wide Chemical Compatibility<br />
• Shorter Length Options Available To Accommodate<br />
Shorter Baskets<br />
Performance Specifications<br />
<strong>Filter</strong> Grades (>99.9% Retention Rating by ASTM<br />
F-795 Test):<br />
1.5, 3, 10, 20, 40 micron (µm)<br />
Maximum Operating Differential Pressure:<br />
to 42 psid (2.89 bard) @ 68˚F (20˚C)<br />
to 15 psid (1.03 bard) @ 175˚F (79˚C)<br />
NOTE: Stainless steel flange required for temperatures in excess of 110˚F (43˚C)<br />
Recommended Change Out Differential Pressure 1 :<br />
35 psid (2.4 bard) @ up to 130˚F (54˚C)<br />
Product Specifications<br />
Materials of Construction:<br />
<strong>Filter</strong> Media: Borosilicate Micro Fiberglass with<br />
Acrylic Binder<br />
Hardware:<br />
Polypropylene End Caps,<br />
Polyester Outer Netting<br />
Support Material: Spunbonded Polyester<br />
Gaskets:<br />
EPDM, Fluorocarbon Elastomer,<br />
Nitrile<br />
Sealing:<br />
Thermal Bond<br />
Dimensions (nominal):<br />
Outside Flange<br />
Diameter:<br />
3 diameters available. Contact factory<br />
for information on sizes available.<br />
Outside <strong>Filter</strong><br />
Diameter:<br />
6" (15.2 cm)<br />
Lengths:<br />
Size 1 - Standard, Short<br />
Size 2 - Standard, Short, Extra Short<br />
40"<br />
1<br />
- Provided that the maximum differential pressure is not exceeded based<br />
on temperature limits defined above.
Liquid Retention Ratings (µm) (by ASTM F-795 Test)<br />
Cartridge 90% >99.9 %<br />
Designation Efficiency Efficiency<br />
DFNM 1.5 0.9 1.5<br />
DFNM 3 1.0 2.6<br />
DFNM 10 2.8 10.0<br />
DFNM 20 9.5 20.0<br />
DFNM 40 17.0 37.0<br />
Liquid Flow Specifications<br />
<strong>Filter</strong><br />
PSID per 1 GPM (mbard/lpm)<br />
Water @ 68˚F (20˚C)<br />
Size 1 Size 2 40"<br />
1.5 0.011 0.005 0.003<br />
(0.21) (0.09) (0.05)<br />
3 0.005 0.002 0.001<br />
(0.09) (0.04) (0.02)<br />
10 0.003 0.001 0.001<br />
(0.06) (0.03) (0.02)<br />
20 0.002 0.001 0.001<br />
(0.04) (0.02) (0.02)<br />
40 0.002 0.001 0.001<br />
(0.04) (0.02) (0.02)<br />
NOTE:<br />
Part Numbers/Ordering Information<br />
DFNM ✖■ – ● U ◆ – ▼ ❚ (e.g., DFNMS1–2UN–PFC)<br />
Code Short Length Code Cartridge<br />
Code<br />
✖ Option<br />
● Lengths<br />
▼<br />
(nominal)<br />
Blank Standard Length<br />
PF<br />
1 Size 1 Bag<br />
S Short Length 2 SF<br />
2 Size 2 Bag<br />
Code <strong>Filter</strong><br />
■ Grades<br />
4 40" Length<br />
NF<br />
1.5 1.5 µm<br />
3 3 µm<br />
10 10 µm<br />
20 20 µm<br />
40 40 µm<br />
Code<br />
◆<br />
Blank<br />
N<br />
E<br />
V<br />
Gasket<br />
Materials<br />
For NF Version<br />
Nitrile<br />
EPDM<br />
(peroxide cured)<br />
Fluorocarbon<br />
Elastomer<br />
- For kPa, multiply mbard/lpm by 0.1.<br />
Code Flange/Gasket Styles 3<br />
❚<br />
A 4<br />
B<br />
C<br />
End Configurations<br />
Plastic Self-Adjusting Flange<br />
Stainless Steel Self-Adjusting Flange<br />
(required for temperatures >110˚F/43˚C)<br />
No Flange (for use with reusable SS Flange)<br />
Rosedale, Strainrite, Krystil Klear, <strong>Pall</strong><br />
GAF, FSI side entry<br />
FSI over the top, Hayward over the top<br />
2<br />
- Size 2 (only) Extra Short Length Option is available. Select “S” for Short<br />
Length, “2” for Size 2 Bag and add “68” to the end of the part number<br />
(e.g., DFNMS1-2UN-PFC 68). Note: PSID will be higher than shown in<br />
chart above for short and extra short elements.<br />
3<br />
- For housings not listed or other than original equipment baskets, consult<br />
your <strong>Pall</strong> sales representative for proper flange/gasket style.<br />
4<br />
- Requires “A” flange if using any of the Marksman 40" products in the<br />
40" <strong>Pall</strong> Marksman housing.<br />
2200 Northern Boulevard<br />
East Hills, New York 11548-1289<br />
888.873.7255 toll free<br />
516.484.5400 phone<br />
516.484.0364 fax<br />
www.pall.com web<br />
Visit us on the Web at www.pall.com<br />
<strong>Pall</strong> <strong>Corporation</strong> has offices and plants throughout the world in locations including:<br />
Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India,<br />
Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand,<br />
Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland,<br />
Taiwan, Thailand, United Kingdom, United States, and Venezuela. Distributors are located in all<br />
major industrial areas of the world.<br />
© Copyright 2006, <strong>Pall</strong> <strong>Corporation</strong>. <strong>Pall</strong>, , Marksman and <strong>Duo</strong>-Fine are trademarks of <strong>Pall</strong> <strong>Corporation</strong>.<br />
® Indicates a <strong>Pall</strong> trademark registered in the USA. is a service mark of <strong>Pall</strong><br />
<strong>Corporation</strong>.<br />
Bulletin #1265-1C 6/06