Oryx Specification Sheet - JED

®
INTERNATIONAL
ORYX
MINE BLAST PROTECTION VEHICLE
THE INTERNATIONAL ® ORYX is answering the Military’s call for improved Force Protection. The ORYX,
with Medium Duty Truck components, will deliver superior performance in severe on/off-road applications.
BASIC SPECIFICATIONS
Length: 225" (5716 mm)
Width: 91" (2300 mm)
Height: 98" (2477 mm)
Wheel base: 140" (3555 mm)
Ground clearance:
Center of vehicle 16.5" (420 mm),
14.4" (366mm) diff clearance
PERFORMANCE
Top speed: 68 mph (110 km/h)
Cruise: 62 mph (100 km/h)
Grade ability: 70% Low range
Turning circle: Curb to curb: 52.5 ft (16 m)
Angle of approach: 46° Gradeability: 60%
Angle of departure: 45° Side Slope: 30%
Mass Tare (GVM): 19,566 lbs (8875 kg)
Payload:
6669-13,283 lbs (3025-6025 kg)
GVWR:
26.4K-33.1K lbs (12K-15K kg)
Seating:
2 Man Crew + 8-10 passengers
Configuration: 4x4
PROTECTION LEVELS
Ballistic Protection: Armor and Glass
7.62x51/54mm AP – B7+
Mine Protection: 1 X TM-57 (7 kg of TNT) under hull
2 X TM-57 (14 kg of TNT) under any wheel
ENGINE
Make:
International V8 Diesel
Emission Standard: EPA 2005
Type:
Turbo inter-cooled, direct
Maximum power: 230 hp (170 kw ) @ 3300 Rpm
electronic injection, four stroke Power/mass ratio: 25.9 hp/t (19.15 kw/t)
Displacement: 6 L VT 365
Maximum torque: 540 ft/lb (729 Nm) @ 2000 Rpm
Other International ® engines available up to 340hp in V8 and I6 configurations.
ELECTRICAL
Batteries : 12 Volt
2 X Batteries
Alternator: 300 Amp
Blackout Lights
Diamond Logic ® Electrical System
TRANSMISSION
Make: Allison 2500
Type: Automatic 5 Speed
TRANSFER CASE
Make: ZF 2 Speed
STEERING SYSTEM
Steering type: Hydraulically assisted
recirculating ball
AXLES
Make: Marmon Herrington R17
Type: Planetary hub reduction
SUSPENSION
Springs: Semi elliptical leaf springs
Shock absorbers: Double acting,
telescopic, hydraulic
BRAKES
Service brakes:
Parking brakes:
Full air brakes with ABS
Pneumatic activated hand operated
on rear drums
WHEELS AND TIRES
Rims: 20 inch
Tires: Michelin XZL 395/85 R20
Runflats: (Optional)
HVAC
24,000 BTU with engine mounted
compressor standard
• Optional 48,000 BTU aircon
FORDING DEPTH
39.4" (1 meter)
without preparation
STANDARD FEATURES
• Toolbox
• Fire Extinguisher
OPTIONS
• Weapon mountings
• Various weapons mounts available
on 360 degree ring mount
• Gun Ports
• Mounted in the armored glass
• Run Flats
• Split rims with Hutchinson RFI inserts
• Communications Equipment
• Various makes and operational
specifications available
UPGRADING
Ballistic Protection: Various upgrading for ballistic protection available,
including steel, ceramic, re-active armor, etc.
Mine Protection: Additional mine protection available through
optional belly plate
INTERNATIONAL ® MILITARY VEHICLES
For more information visit www.InternationalMilitaryandGovernment.com
Specifications, descriptions and illustrative material in this literature are as accurate as known at time of publication,
but are subject to change without notice. Illustrations may include optional equipment and accessories, and may
not include all standard equipment. International and the International Diamond logo are registered trademarks of
International Truck and Engine Corporation.
©2006 International Truck and Engine Corporation, Warrenville, IL 60555
AD-44466L 02/2006 Lithographed in the United States of America
®
A N AV I S TA R C O M PA N Y