CAST BRACKETS - Sharpe® Valves
CAST BRACKETS - Sharpe® Valves
CAST BRACKETS - Sharpe® Valves
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CAST</strong> BRACKET<br />
Brackets and coupler<br />
are made of stainless<br />
steel.<br />
The cast brackets<br />
rigid construction was<br />
done with the aid of<br />
FEM analysis for the<br />
torque applied.<br />
The boss has option for<br />
connecting<br />
Inductive position limit<br />
switches.<br />
Can be used for<br />
mounting limit switches<br />
on manual valves.<br />
Aesthetic look with<br />
clear visibility of stem<br />
position.<br />
There is clearance to<br />
allow tightening the<br />
stem nut with a wrench<br />
without removing the<br />
actuator.<br />
Two opposing holes for<br />
locking the actuator<br />
during maintenance<br />
and installation.<br />
Clearance from valve<br />
flanges and bolting.<br />
Multiple drilling of ISO<br />
5211 on one side of the<br />
bracket.<br />
S h a r p e ® • T o l l F r e e (877) 774-2773 • F a x (708) 562-9250 • www.sharpevalves.com
Change language