LANDSCAPE LIGHTING COLLECTION CATALOG (pdf) - Kim Lighting

LED
Bell Stem
Specifications
HOUSING AND LENS FRAME: Die-cast brass
or aluminum. Frame attaches to housing with four
captive ¼-20 stainless steel slotted cap screws.
LENS: Tempered clear soda lime glass. flush with
lens frame.
ARM: Cast brass or aluminum. Head is independently
rotatable 300° vertically from top dead center.
Set screw provided for locking position.
STEM: ½" schedule 40 aluminum or brass pipe with
½" NPT at bottom. Solid brass locknut for mounting.
GASKETING: Silicone gaskets throughout.
WIRING: (KLV162, KLV167) 3' No. 18-2 cable
with spade connectors for low voltage cable system
connection. (EL167, BN167) No. 18AWM rated 105°C.
OPTICAL SYSTEM: A total of 3 or 9 LED emitters
configured in a rectangular array comprised together
as a module. Available in 3000K, 4200K and 5100K.
DRIVER: (KLV167 KLV162) Constant current
electronic driver, 12V input. -40ºF. starting temperature.
(BN167, EL167) 120 to 277V Universal Voltage,
±10% tolerance, -40ºF starting temperature. All
drivers are Underwriters Laboratories recognized.
FINISH: (Brass) Natural Brass (NB) and Verde
Green Patina (VG). (Aluminum) Each luminaire
receives a fade and abrasion resistant, electrostatically
applied, thermally cured, triglycidal isocyanurate (TGIC)
polyester powdercoat finish. Standard colors are (BL)
Black, (DB) Dark Bronze and Verde Green (GR).
CERTIFICATION: The fixture is listed with ETL
for outdoor wet location use. Conforms to UL 1598,
8750 and Canadian CSA Std. C22.2 No. 250.0.
The Bell classic landscape illuminator is a slim internationally styled fixture
featuring a rotatable head that can be adjusted upward or downward
for maximum versatility.
Die-Cast Brass
1 FIXTURE 2 SOURCE Volts Watts 3 FINISH
Die-Cast Aluminum
1 FIXTURE 2 SOURCE Volts Watts 3 FINISH
4 OPTIONS (For Brass and Aluminum Fixtures)
HL72 2,3
Hex Cell
Louvers
SL72 2,4
Spread
Lens
PL72 2,4
Prismatic
Lens
KLV167 • KLV162 • BN167 • EL167
KLV167 1 3L 3K, 4K or 5K 12 Volt 4W NB Natural Brass
BN167 3L 3K, 4K or 5K UV 4W
VG Verde Green Patina
9L 3K, 4K or 5K UV 11W
KLV162 1 3L 3K, 4K or 5K 12 Volt 4W BL Black,
EL167 3L 3K, 4K or 5K UV 4W
DB Dark Bronze
GR Verde Green
9L 3K, 4K or 5K UV 11W
KEY: 3L = 3 LEDs, 9L = 9 LEDs, 3K = 2800K to 3175K, 4K = 3800K to 4600K, 5K = 4600K to 5600K,
UV = Universal Voltage shall range from 120V-277V with a ±10% tolerance.
NOTES: 1 Remote transformer required, purchased separately. 2 Inserts behind lens
into existing lens gasket. 3 Cannot be used in combination with SL Spread or PL Prismatic Lens.
4
Cannot be used in combination with HL Hex Cell Louver. See pg. 26-28 for Mounting Accessories.
ORDERING EXAMPLE
FIXTURE SOURCE FINISH OPTIONS
BN167 / 9L5KUV / DB / HL72
1 2 3 4
Also available in the following lamp sources at www.kimlighting.com:
12V HALOGEN
120V HALOGEN
KLV165 Brass
KLV160 Aluminum
BN165 Brass
EL160 Aluminum
LED INC HAL HID FL CFL
For photometrics, comprehensive specification data and warranty, log onto www.kimlighting.com.
7C"
(187 mm)
2J"
(57 mm)
7K"
(191 mm)
5K" DIA.
(140 mm)
29"
(737 mm)
K" NPT
KLV167 in NB Natural Brass finish
24 KIM LIGHTING | www.kimlighting.com
KLV162 in DB Dark Bronze finish
Path