airport solutions

airport solutions

About Smiths Detection 

Smiths Detection equips customers around the world with high integrity solutions to safeguard society, protect 

life and support the free flow of trade. It has developed government regulated advanced technologies to detect 

and identify dangerous or illegal materials, contraband, and constantly evolving chemical, biological, radiological, 

nuclear and explosive (CBRNE) materials. Its range of threat detection equipment includes powerful X-ray screening 

systems, trace detectors, chemical agent detectors and identifiers, and body screening systems which are used 

extensively in transportation, critical infrastructure, ports and borders, military and emergency responder markets. 

Our core technologies 

Smiths Detection supports its customers using the following complementary technologies: 

• X-ray Imaging for hidden weapons, explosives, narcotics and contraband detection 

• MILLIMETRE-WAVE (mmw) imaging for people screening 

• Ion Mobility Spectrometry (IMS) for explosives, narcotics, chemical agent and toxic industrial 

chemicals detection and identification 

• Raman Spectroscopy for unknown liquids and solids identification 

• Fourier-Transform Infrared Spectroscopy (FTIR) for unknown white powders, Weapons of Mass 

Destruction (WMD), explosives and toxic chemicals identification 

• Gamma Ray Spectroscopy for radiological gamma sources identification 

• Gas Chromatography/Mass Spectrometry (GC/MS) for chemical identification and mixture analysis 

Principal Operating Regions 

Smiths Detection‘s global presence, combined with strong relationships with distributors and representatives, 

provides customers with sales and service support around the world. R&D and manufacturing centres are 

established in Canada, France, Germany, Malaysia, UK and USA, with sales and service centres in 10 other 

countries.

CONTENTS | SECURITY SCREENING PROCESS 

PASSENGER 

CABIN 

BAGGAGE 

CHECKED 

BAGGAGE 

OUT-OF 

-GAUGE 

AIR MAIL/ 

AIR CARGO 

BREAK 

BULK 

EMPLOYEE 

SCREENING 

FACILITIES 

ACCESS 

CUSTOMS 

EMERGENCY 

RESPONSE 

HI-SCAN 6040i • • • • 

HI-SCAN 6046si • • • • 

TIM • 5 • • 

OptoScreener • 5 • • 

HI-SCAN 6040-2is • • • • 

HI-SCAN 6040aX • 1 • • • 

HI-SCAN 7555aX • 1 • • • 

HI-SCAN 6040aTiX • 1,5 • • • • 

HI-SCAN 7555aTiX • 1,5 • 1 • • • • 

HI-SCAN 7555i • • • • 

HI-SCAN 7555si • • • • 

HI-SCAN 5180si • • 

HI-SCAN 9075 • • • 

HI-SCAN 100100V • • • 

HI-SCAN 100100T • • • 

HI-SCAN 100100V-2is • • • • • 

HI-SCAN 100100T-2is • • • • • 

HI-SCAN 130100T • 2 • • 

HI-SCAN 130130T-2is • 2 • • • • 

HI-SCAN 10080 EDX-2is • 1 • 1 • 1 • 1 • 1 

HI-SCAN 10080 EDtS • 1 • 1 • 1 • 1 • 1 

HI-SCAN 10080 XCT • 1 • 1 • 1 • 1 • 1 

HI-SCAN 130130T-2is HD • • 1 • 

HI-SCAN 145180 • • 1 • 

HI-SCAN 145180-2is • • 1 • 

HI-SCAN 180180 • • 1 • 

HI-SCAN 180180-2is pro • • • 

CIP-300 • • 

CXS Networking • 4 • 4 • 4 • 4 • 4 • 4 • 4 • 4 

Matrix Server Small • 7 • 6 • 6 • 6 • 6 • 6 • 6 • 6 

Matrix Server Medium • 7 • 6 • 6 • 6 • 6 • 6 • 6 • 6 

Matrix Server Large • 7 • 6 • 6 • 6 • 6 • 6 • 6 • 6 

Matrix Server Compact • 7 • 6 • 6 • 6 • 6 • 6 • 6 • 6 

Analyst Workstation • 7 • 6 • 6 • 6 • 6 • 6 • 6 • 6 

Recheck Workstation • 6 • 6 • 6 • 6 • 6 • 6 • 6 • 6 

SAM System Activity Monitor • 4 • 4 • 4 • 4 • 4 • 4 • 4 • 4 

HiTraX 

•4 

• 4 • 4 • 4 • 4 • 4 • 4 • 

HiTraX Image Enhancement • 4 • 4 • 4 • 4 • 4 • 4 • 4 • 

X-ACT • 4 • 4 • 4 • 4 • 4 • 4 • 4 • 

HI-TIP • 4 • 4 • 4 • 4 • 4 • 4 • 4 • 

19" TFT Motion Blur • 4 • 4 • 4 • 4 • 4 • 4 • 4 • 

iLane.pro • • 4 • 4 • 4 

iLane.evo • • 4 • 4 • 4 

eqo • • • • 

B-SCAN 16HR-DV • • • • 

B-SCAN 16HR-FB • • • • 

B-SCAN 16HR-LD 100 • • • 

B-SCAN 16HR-LD 250 • • • 

SABRE 5000 • 3 • 3 • 3 • 3 • 3 • 3 • 3 • 3 • 3 • 3 

IONSCAN 500DT • • • • • • • • 

MMTD • 3 • 3 • 3 • 3 • 3 • 3 • 3 • 3 • 3 • 3 

RadSeeker • 3 • 3 • 3 • 3 • 3 

GUARDION • • • • • • 

HazMatID Elite 

• 

ACE-ID • 3 • 3 • 3 • 3 

GasID 

• 

• 1 Automated Explosives Detection 

• 2 Special design for system integration 

• 3 Handheld, mobile 

• 4 Option for HI-SCAN units (except EDX-2is, EDtS, XCT) 

• 5 Liquid Explosives Detection EU Standard 2 

• 6 Option for HI-SCAN units (CXS & EDS) 

• 7 Option for CXS and for EDS aviation checkpoints

Technical Information 

HI-SCAN 

6040i 

HEIMANN X-RAY TECHNOLOGY 

Feature Highlights 

• High-End processor technology 

• High-Speed digital signal transmission 

• HI-MAT Plus advanced material 

classification 

• High image resolution 

• 24 Bit real time image processing 

• New ergonomic user interface 

• Free programmable priority keys 

The HI-SCAN 6040i is a newly designed, 

compact X-ray inspection system with a tunnel 

opening of 620 mm (24“) wide by 418 mm 

(16.5“) high. This tunnel size is ideally suitable 

for cabin baggage and other small items 

in areas with increasing security demands. 

The HI-SCAN 6040i is part of the new iLane 

system concept, which offers various possibilities 

of extension due to a modular, flexible 

system design. 

Online image analysis methods to support 

the operator´s work, and a new manmachine 

interface configured according to 

ergonomic aspects, are pointing the way to 

the future for this kind of system. 

Innovative technique and a high degree of 

reliability, make this system an excellent tool 

for covering sensitive fields of inspection. 

The equipment offers the operating personnel 

optimum support in making decisions 

and reduces inspection times considerably. 

www.smithsdetection.com 

5

Technical Data HI-SCAN 6040i 

General Specifications 

Tunnel dimensions 

Max. object size 

Conveyor height 1) 

Conveyor speed at mains frequency 

50 Hz / 60 Hz 

max. conveyor load even distributed 

over the whole conveyor 

Resolution (wire detectability) 2) 

Penetration (steel) 2) 

X-ray dose / inspection (typical) 

Film safety 

Duty cycle 

X-ray Generator 

Anode voltage • cooling 

Beam direction 

Image Generating System 

X-ray converter 

Grey levels stored 

Image presentation 

Digital video memory 

Image evaluation functions 

Monitor 

Additional Features 

Features 

Options 

Installation Data 

X-ray leakage 

CE-labelling 

Sound pressure level 

Operating- / storage temperature 

Humidity 

Power supply 3) 

Power consumption 

Protection class system / keyboard 

Dimensions • Weight 4) 

Mechanical construction 

620 (W) x 418 (H) [mm] • 24.4” (W) x 16.5” (H) 

615 (W) x 410 (H) [mm] • 24.2” (W) x 16.1” (H) 

approx. 694 mm (27.3”) 

approx. 0.2 / 0.24 [m/s] 

160 kg (352 lbs) 

standard: 39 AWG (0.09 mm) • typical: 40 AWG (0.08 mm) 

standard: 30 mm • typical: 31 mm 

standard: 0.7 µSv (0.07 mrem) • with HI-MAT: 1.4 µSv (0.14 mrem) 

guaranteed up to ISO 1600 (33 DIN) 

100 %, no warm-up procedure required 

140 kV cp • hermetically sealed oil bath 

diagonal 

L-shaped detector line 

4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI-MAT, O2, OS, HIGH, electronic zoom: stepless enlargement up to 16-times 

Flat Panel LCD Monitor 

fading-in of date/time, luggage counter, user id-number, luggage marking system (acoustic), display of operating 

mode, REVIEW-feature (to recall previously visible image areas), zoom overview, free programmable keys, USB 2.0 

interface, stepless zoom 

X-ACT, HI-TIP, HI-SPOT, SEN, XPlore, IMS (image management system), Xport, Media Bay for RIDA (250 GB), 

CD/RW module 

meets all applicable laws and regulations with respect to X-ray emitting devices. 

in compliance with directives 2004/108/EC, 2006/42/EC, 2006/95/EC 

< 70 dB(A) 

0° - 40°C / -20°C - +60°C 

10% - 90% (non-condensing) 

standard: 230 VAC or 120 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 

approx. 0.8 kVA 

IP 20 / IP 43 

2004 (L) x 850 (W) x 1284 (H) [mm] • approx. 400 kg 

78.9” (L) x 33.5” (W) x 50.6” (H) • approx. 881.9 lbs 

steel construction with steel panels, mounted on roller castors 

standard color(s): RAL 7016 (dark gray) / B11-W1 (blue) 

1) 

approx. values (adjustable) 

2) 

proprietary quality management test piece: steel step wedge, 

CU wires, belt speed 0.2 m/s 

3) 

different values optional 

4) 

without control desk, keyboard, monitor(s) etc. 

For product information, sales or service, please go to www.smithsdetection.com/locations 

Smiths Heimann GmbH, Im Herzen 4, 65205 Wiesbaden, Germany 

Modifications reserved. 95584657 18/09/2012 © Smiths Detection Group Ltd. - In some cases, the figures contain options 

HI-SCAN is a trademark of Smiths Detection Group Ltd. 

6


HI-SCAN 

6046si 



• New X-ray generator with optimized 

spectrum 

• New high resolution XADA sensor 

technology 

• New HiTraX II system platform with 

extended scope of services 

• High resolution image display with 

doubled resolution 

• Up to 37 mm steel penetration 

• Wire detectability up to AWG 41 

HI-SCAN 6046si is a consequent advancement 

of HI-SCAN 6040i, with more than 6000 

installations worldwide the most successful 

X-ray inspection system in its class. 

HI-SCAN 6046si, despite all similarities, is by 

far more than a conventional X-ray system 

with a facelift. Crucial technological innovations 

concerning X-ray sensor and image 

processing technologies were part of the 

R&D process. 

HI-SCAN 6046si is equipped with an advanced 

multi-energy X-ray generator, a new 

generation of electronics plus a completely 

novel high resolution detector line. 

Due to this optimized technology, the system 

demonstrates performance rates unachieved 

before. 

HI-SCAN 6046si produces extremely detailed 

X-ray images, which impress by a more than 

doubled number of real, physical pixels. The 

drastically enhanced image resolution of the 

scanned objects represents a decisive advantage 

for image evaluations in security areas. 

HI-SCAN 6046si additonally has a higher tunnel 

opening and therefore can scan objects, 

whose sizes exceed standard dimensions for 

hand luggage in the aviation industry. 

HI-SCAN 6046si - increased security by 

advanced technology. 


7

Technical Data HI-SCAN 6046si 





Conveyor speed at mains 

frequency 50 Hz / 60 Hz 

Max. conveyor load 

(evenly distributed) 



ASTM 792-08 (Test 1, Test 3, Test 4) 

X-ray dose (typical) 

Film safety 

Duty cycle 


Anode voltage • Cooling 








Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 


Operating-/ storage temperature 

Humidity 



Protection class system/ keyboard 



620 (W) x 460 (H) [mm] • 24.4” (W) x 18.1” (H) 

615 (W) x 455 (H) [mm] • 24.2” (W) x 17.9” (H) 

approx. 694 mm (27.3”) 

approx. 0.2 / 0.24 [m/s] 

160 kg (352 lbs) 



Test 1: AWG 40 5) / Test 3: 1 mm horz./vert. 5) / Test 4: 34 mm 5) 

HI-MAT: 1.6 µSv (0,16 mrem) 

guaranteed even for high speed films up to ISO 1600 (33 DIN) 


160 kV cp • Hermetically sealed oil bath 

diagonal 

L-shaped detector line, high resolution 

4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI-MAT, O 2 , OS, HIGH 

electronic zoom: stepless enlargement up to 16-times 






CD/RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 



steel construction with steel panels, mounted on rollers 

standard color(s): RAL 7016 (dark grey) / B11-W1 (blue) 

1) 


2) 



3) 


4) 


5) 

max. measurable values with ASTM 792-08 test piece 





8


TIM 

Threat Identification Module for Liquids 

EU LEDS (Liquid Explosives Detection) Standard 2 Type C 

upgrade Package for HI-SCAN 6040i and HI-SCAN 6046si 


• Easy and inexpensive X-ray enhancement 

to EU LEDS Standard 2 

Type C 

• No costly checkpoint redesign 

or additional operator training 

required 

• No disruption in airport operations 

• Compatible with most functions and 

features of the HI-SCAN 6040i + HI- 

SCAN 6046si incl. TIP (Threat Image 

Projection) 

• Upgrade available for all HS 6040i 

and HS 6046si X-ray machines 

manufactured since 2007 

TIM provides an easy and inexpensive 

upgrade for the new EU Liquid Explosives 

Detection (LEDS) Standard 2 Type C requirements, 

which become effective from 31 

January 2014. The new upgrade is available 

for all new and existing HI-SCAN 6040i and 

HI-SCAN 6046si X-ray machines, manufactured 

since 2007. 

This simple modular add-on has been 

designed to avoid costly alterations to 

checkpoint design. The smart mechanical 

housing contains all the components needed; 

an X-ray generator, the detector line and 

the hardware for Liquid Explosive Detection 

algorithms. 

Suspicious objects are automatically 

highlighted within a red frame, for the convenience 

of the operator; the superior image 

quality and other features of the system remain 

unchanged. This enhancement enables 

reliable and consistent automated screening 

of cabin baggage, in real-time, with minimal 

effect on airport operations. 

TIM has been approved by ECAC (European 

Civil Aviation Conference) as Liquid Explosives 

Detection System (LEDS) according to 

EU Standard 2 Type C for HI-SCAN 6040i and 

HI-SCAN 6046si single-view systems. 


9

Technical Data TIM 1 


TIM with HI-SCAN 6046si + 

Dimensions 

Weight 


Anode voltage 



Options 

2004 (L) x 1090 (W) x 1315 (H) [mm] 

625 kg (X-ray inspect. system incl.) 

100 kV 

horizontal 

HI-TIP, HI-SPOT, SEN, X-Plore, IMS (Image Management System), Xport 


TIM with HI-SCAN 6040i 

Dimensions 

Weight 


Anode voltage 



Options 

2004 (L) x 1090 (W) x 1315 (H) [mm] 

618 kg (X-ray inspect. system incl.) 

100 kV 

horizontal 

HI-TIP, HI-SPOT, SEN, X-Plore, IMS (Image Management System), Xport 

1) 

Technical data differs from technical data of HI-SCAN 6046si and HI-SCAN 6040i. 

For information on HI-SCAN 6040i and HI-SCAN 6046si see corresponding data sheets. 

HI-SCAN 6046si with TIM 

Right version Left version 

HI-SCAN 6040i with TIM 

Right version Left version 




TIM is a trademark of Smiths Detection Group Ltd. 

10


OptoScreener ® 

EU LEDS (Liquid Explosives Detection) Standard 2 Type C 

upgrade for HI-SCAN 6040i and HI-SCAN 6046si 


• Easy and inexpensive enhancement 

for X-ray inspection systems to 

meet EU LEDS Standard 2 Type C 1 

• Analyses up to 3 containers filled 

with liquids, aerosols and gels 

(LAGs) simultaneously 

• Suspect containers are clearly highlighted 

on the touchscreen monitor 

• Compatible with most functions and 

features of the HI-SCAN 6040i and 

HI-SCAN 6046si 

• Upgrade available for HI-SCAN 

604oi 2 and HI-SCAN 6046si 

OptoScreener ®3 provides an easy and inexpensive 

upgrade of X-ray inspection systems 

to meet EU Liquid Explosives Detection 

(LEDS) Standard 2 Type C requirements 

which will come into force on 31 January 

2014. 

OptoScreener ® has been certified by the European 

Civil Aviation Conference (ECAC) on 

HI-SCAN 6040i and HI-SCAN 6046si systems 

and is suitable for both newly ordered systems 

and systems already in operation. 

The OptoScreener ® enables reliable and 

consistent automated screening of cabin 

baggage, in real-time, with minimal effect on 

airport operations. 

This enhancement does not require any 

costly alterations to checkpoint design and 

can be installed and put into operation within 

a few hours. 

For the convenience of operators the OptoScreener 

® automatically marks suspect 

liquid containers on a touchscreen monitor. 

OptoScreener ® comprises electronics 

installed on the X-ray inspection unit, a highperformance 

computer for the automatic 

Liquid Explosive Detection algorithms and 

a monitor with touchscreen for a comfortable 

operation via an advanced humanmachine 

interface. The operation of the 

X-ray inspection unit via the known HI-SCAN 

user interface on the main monitor remains 

unchanged. 

OptoScreener ® has been designed to keep 

pace with our customers’ changing requirements 

and provides the basic hardware 

for checkpoint extensions such as remote 

operator workststations and checkpoint 

management solutions for the collection and 

analysis of statistical data. 


11

Technical Data OptoScreener ® 

Features 

Options 

- Automatic detection of liquids, aerosols and gels (LAGs) according to EU LEDS Standard 2 Type C 

- Detection algorithms can analyse up to 3 containers simultaneously in the nestable OptoTray 

- Supports container volumes up to 2 litres 

- Suspicious containers are clearly highlighted 

Bottle locator 4 : a software extension for the detection of bottles left in cabin baggage 


Operating / Storage temperature 

Relative humidity 

Power supply 


Dimensions / Weight 

OptoScreener ® Workstation 

Dimensions / Weight 

OptoScreener ® Monitor 

CE marking 

5º to 35ºC / -20º to +60ºC 

20% to 80% (non-condensing) 

100 to 240 VAC (50 Hz / 60 Hz) 

approx. 460 VA 

444.5 (H) x 171.5 (B) x 464.8 (T) [mm] / approx. 17.9 kg 

17.5 (H) x 6.75 (W) x 18.3 (D) [in] / approx. 39.5 lbs 

366 (H) x 391 (B) x 203 (T) [mm] / approx. 7 kg 

14.4 (H) x 15.4 (B) x 8 (T) [in] / approx. 15.4 lbs 

Complies with the following directives: 

2006/95/EC 

2004/108/EC 

2011/65/EU 

Directive of the European Parliament and of the Council of 12 December 2006 on the harmonisation 

of the laws of Member States relating to electrical equipment designed for use within certain 

voltage limits 

Directive of the European Parliament and of the Council of 15 December 2004 on the approximation 

of the laws of the Member States relating to electromagnetic compatibility 

Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the 

use of certain hazardous substances in electrical and electronic equipment 

1) OptoScreener ® can only be used on Smiths Detection X-ray inspection systems HI-SCAN 6040i and HI-SCAN 6046si. 

2) Upgrade availability for HI-SCAN 6040i dependent on unit configuration, please contact Smiths Detection for details. 

3) OptoScreener ® is a registered trademark owned by Optosecurity Inc. 

4) No automatic detection according to EU LEDS standard 2 for bottles left in cabin baggage. 

Example: 

OptoScreener ® touchscreen monitor - Alarmed LAG 




12


HI-SCAN 

6040-2is 

DUAL-VIEW X-RAY INSPECTION FOR HAND LUGGAGE 


• Compact footprint and weighs less 

than 850 kg (1873 lbs) 

• Steel penetration of 35 mm (1.38“) 

• Flexible design for easier 

installation through door widths of 

900 mm (35.5“) 

• Dual-view technology 

• Operator friendly interface 

• Available in standard and high 

resolution 

HI-SCAN 6040-2is HR: Approved as 

Liquid Explosives Detection System 

(LEDS) according to EU Standard 2 

Type C 


HI-SCAN 6040-2is is an advanced dual 

view X-ray inspection system for automatic 

explosives and liquids detection. It offers 

high throughput at security checkpoints, 

where bags and personal belongings are 

screened, utilising proven Heimann X-ray 

technology to assist with detection of 

dangerous and illegal objects, highlighted in 

excellent, high quality dual-view images. 

With its modern, contemporary design 

the HI-SCAN 6040-2is provides increased 

flexibility, with its compact footprint and 

lower weight, less than 850 kg (1873 lbs). It 

can be used in areas that are restricted in 

space and will fit through doorways of 

900 mm (35.5“) for installation. 

It offers further flexibility with different 

monitor options and an integrated lockable 

keyboard. Monitors can be placed on top 

of the X-ray unit or on a wheeled stand, to 

provide remote operation away from the 

machine. 

HI-SCAN 6040-2is comes with outstanding 

steel penetration of 35 mm (1.38“) and an 

operator friendly interface which makes it 

easy for the user to identify illegal objects 

and explosives that pose a threat to society. 

Available in standard and also in high 

resolution, for better wire detectabiliy 

(AWG 40) in order to comply with EU 

Standard 2 Type C (LEDS). 

The HI-SCAN 6040-2is is suitable for 

airports, government buildings, hotels and 

other critical infrastructure applications 

where reliable security solutions are 

required. 

13

Technical Data HI-SCAN 6040-2is 





Conveyor speed with 50 Hz / 60 Hz 

mains frequency 

Max. conveyor load even distributed 



Pentration (steel) 2) 


External dose 

Film safety 

Operating cycle 


X-ray generators 









Monitor 


Functions 

Options 


X-ray leakage 

CE labelling/directives 

Sound pressure 

Operating-/storage temperature 

Humidity 

Power supply 


Protection class system/keyboard 

Dimensions • weight 4) 


620 (W) x 420 (H) [mm] • 24.4” (W) x 16.5” (H) 

615 (W) x 410 (H) [mm] • 24.2” (W) x 16.1” (H) 

approx. 800 mm (31.4”) 

standard: 0.2/0.24 [m/s] 

160 kg (352 lbs) 

standard resolution (SR): standard: 39 AWG • typical: 40 AWG 

high resolution (HR): standard: 40 AWG • typical: 41 AWG 


4.6 µSv 

< 1 µSv/h 

guaranteed up to ISO 1600 (33 DIN) with a maximum of 5 inspections 


2 


horizontal and vertical 

dual-view detector system with large-scale integrated, monolithic amplifier 

4096 

B/W, color, HI-MAT Plus 

1280 x 1024 / 24 bit 

VARI-MAT, O 2 , OS, HIGH, LOW, NEG 

stepless, electronic Zoom: enlargement: up to 64 times 





HI-TIP, HI-SPOT, SEN, XPlore, IMS (Image Store System - stores up to 100,000 images), Xport, Media Bay for RIDA 

(250 GB) 

meets all applicable laws and regulations with respect to X-ray emitting devices 


developed in accordance with directives IEC, UN, UL, CSA 

< 65 dB(A) 

0° - 40°C / -20°C - +60°C 

10% - 90% (not condensing) 

standard: 100, 120, 200, 230, 240 VAC +10% / -20% • 50 Hz - 60 Hz ± 3 Hz 

max. 1.2 kVA 

IP 20 / IP 43 



standard color(s): silver matt / B11-W1 (blue) 

1) 


2) 



3) 

4) 


2340mm 

92.0in 

420mm 

16.5in 

1500mm 

59.1in 

420mm 

16.5in 

1314mm 

51.7in 

800mm 

31.5in 

100mm 

3.9in 

1372mm 

54.0in 

420mm 

16.5in 

52mm 

2.1in 

620mm 24.4in 

823mm 

32.4in 

439mm 

17.3in 





14


HI-SCAN 

6040aX 



• Dual view X-ray inspection system 

• Upgradeable to full capability of automatic 

explosives detection system 

HI-SCAN 6040aTiX 

• X-ray generator with optimized 

spectrum 

• High resolution XADA sensor technology 

• Fully integratable in networks for 

system management, archiving, 

image distribution and TIP functionalities 

HI-SCAN 6040aX allows explosives detection 

at security checkpoints. 

HI-SCAN 6040aX is a state-of-the-art dualview 

X-ray inspection system that uses 

independent multi-energy generators. 

Its modular system platform facilitates 

in-field upgrades to a full 4-view automated 

explosives and liquid detection system 

HI-SCAN 6040aTiX retaining the footprint 

unchanged. 

The basic security system concept addresses 

requirements to adapt to future threat scenarios 

respectively regulatory frameworks. 

HI-SCAN 6040aX utilizes latest high performance 

EDS detection technology. 

The operating concept of the proven HI-SCAN 

series has been retained which guarantees 

an optimum passenger throughput at 

checkpoints. 

The two detailed views (Dual View) available 

to carry out manual analysis support the 

quick and reliable evaluation process. 

HI-SCAN 6040aX 

increased security by innovative technology. 


15

Technical Data HI-SCAN 6040aX 












Film safety 












Monitor 


Functions 

Options 


X-ray leakage 




Humidity 



Protection class 



620 (W) x 418 (H) [mm] • 24.4” (W) x 16.5” (H) 

615 (W) x 410 (H) [mm] • 24.2” (W) x 16.1” (H) 

approx. 800 mm (21.5”) 

standard: 0.2 [m/s] 

160 kg (352 lbs) 

standard: 40 AWG (0.08 mm Cu) • typical: 41 AWG (0.07 mm Cu) 


5.5 µSv (0.55 mrem) in dual view version, 

11 µSv (1.1 mrem) in full 4 view version 



2 in dual view version • 4 in full 4 view version HI-SCAN 6040aTiX 


from different directions, horizontal and vertical 

MultiView detector system with large-scale integrated, monolithic amplifier 

4096 


1280 x 1024 / 24 bit 







HI-TIP, HI-SPOT, SEN, XPlore, IMS (Image Store System), Xport, Media Bay for RIDA (250 GB), CD/RW module; 

HDA in dual view version 




< 65 dB(A) 

0° - 40°C / -20°C - +60°C 


standard: 120, 200, 230, 240 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 

max. 1.5 kVA in dual view version • max. 1.92 kVA in full 4 view version 

IP 20 / IP 43 

3300 (L) x 1310 (W) x 1400 (H) [mm] • approx. 1400 kg for dual view version 

• approx. 1600 kg for full 4 view version 

129.9” (L) x 51.6” (W) x 55.1” (H) • approx. 3528 lbs 



1) 


2) 



3) 


4) 






16


HI-SCAN 

7555aX 



• Dual view X-ray inspection system 

• Upgradeable to full capability of automatic 

explosives detection system 

HI-SCAN 7555aTiX 

• Universally usable for carry-on 

baggage and air cargo packages 

• High resolution XADA sensor technology 

• Break bulk optimized max. conveyor 

load of 250 kg (550 lbs) 

• Fully integratable in networks for 

system management, archiving, 

image distribution and TIP functionalities 

HI-SCAN 7555aX allows explosives detection 

at security checkpoints. 

HI-SCAN 7555aX is a state-of-the-art dualview 

X-ray inspection system that uses 

independent multi-energy generators. 

Its modular system platform facilitates 

in-field upgrades to a full 4-view automated 

explosives and liquid detection system 

HI-SCAN 7555aTiX retaining the footprint 

unchanged. 

The basic security system concept addresses 

requirements to adapt to future threat scenarios 

respectively regulatory frameworks. 

HI-SCAN 7555aX utilizes latest high performance 

EDS detection technology. 




checkpoints. 




HI-SCAN 7555aX 

increased security by innovative technology. 


17

Technical Data HI-SCAN 7555aX 












Film safety 












Monitor 


Functions 

Options 


X-ray leakage 




Humidity 






755 (W) x 555 (H) [mm] • 29.7” (W) x 21.9” (H) 

750 (W) x 550 (H) [mm] • 29.5” (W) x 21.7” (H) 

approx. 800 mm (31.5”) 


250 kg (550 lbs) 



5.5 µSv (0.55 mrem) in dual view version, 

11 µSv (1.1 mrem) in full 4 view version 



2 in dual view version • 4 in full 4 view version HI-SCAN 7555aTiX 




4096 


1280 x 1024 / 24 bit 



Flat Panel LCD Monitors (2) 




HI-TIP, HI-SPOT, SEN, XPlore, IMS (image management system), Xport, Media Bay for RIDA (250 GB), 

CD/RW module 




< 65 dB(A) 

0° - 40°C / -20°C - +60°C 


standard: 100, 120, 200, 230, 240 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 

max. 1.8 kVA in dual view version • max. 2.2 kVA in full 4 view version 

IP 20 / IP 43 





1) 


2) 



3) 


4) 


1445 

1085 

755 

555 

1535 

2605 

800 

3450+15 





18


HI-SCAN 

6040aTiX 



• Automatic detection of explosives in 

carry-on baggage 

• Analysis of Z eff 

and density using 

independent views 

• Maximum baggage throughput / 

real time evaluation 

• Proven, ergonomic operating 

concept is retained 

• Two high-resolution and detailed 

views (Dual View) 

HI-SCAN 6040aTiX is the first system to allow 

explosives detection at security checkpoints. 

HI-SCAN 6040aTiX uses several, independent 

multi-energy generators, each of which is 

connected to its own sophisticated and stateof-the-art 

X-ray sensor technology. 

While the detection performance of HI-SCAN 

6040aTiX is far superior to that of other 

automatic systems, the rate of false alarms 

has been considerably reduced through the 

use of optimized algorithms. 

Using advanced computer technologies, even 

complex analyses will be carried out in realtime 

without hampering usual checkpoint 

measures. 




checkpoints. 




HI-SCAN 6040aTiX - increased security by 

innovative technology. 


19

Technical Data HI-SCAN 6040aTiX 












Film safety 












Monitor 


Functions 

Options 


X-ray leakage 




Humidity 






620 (W) x 418 (H) [mm] • 24.4” (W) x 16.5” (H) 

615 (W) x 410 (H) [mm] • 24.2” (W) x 16.1” (H) 

approx. 800 mm (21.5”) 

0.2 [m/s] 

160 kg (352 lbs) 



HI-MAT: 10 µSv (1 mrem) 



4 




4096 


1280 x 1024 / 24 bit 








CD/RW module 




< 65 dB(A) 

0° - 40°C / -20°C - +60°C 


standard: 120, 200, 230, 240 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 

max. 1.92 kVA 

IP 20 / IP 43 





1) 


2) 



3) 


4) 






20


HI-SCAN 

7555aTiX 


EU standard 2 approved Explosives Detection System 


• EU standard 2 approved Explosives 

Detection System for Hold Baggage 

Screening 

• EU standard 2 approved type C 

liquid Explosives Detection System 

(LEDS) for carry-on baggage 

• Automatic detection of explosives in 

carry-on baggage 

• Analysis of Z eff 

and density using 

independent views 

• Universally usable for carry-on 

baggage and air cargo packages 

• Maximum baggage throughput / 

real-time evaluation 

• Break bulk optimized max. conveyor 

load of 250 kg (550 lbs) 

• Proven, ergonomic operating concept 

is retained 

HI-SCAN 7555aTiX is the first system to allow 

explosives detection at security checkpoints. 

HI-SCAN 7555aTiX uses several, independent 

multi-energy generators, each of which is 

connected to its own sophisticated and stateof-the-art 

X-ray sensor technology. 

While the detection performance of the 

HI-SCAN 7555aTiX is far superior to that of 

other automatic systems, the rate of false 

alarms has been considerably reduced 

through the use of optimized algorithms. 

Using advanced computer technologies, even 

complex analyses will be carried out in realtime 

without hampering usual checkpoint 

measures. 



an optimum passenger throughput at checkpoints. 




HI-SCAN 7555aTiX - increased security by 

innovative technology. 


21

Technical Data HI-SCAN 7555aTiX 












Film safety 












Monitor 


Functions 

Options 


X-ray leakage 




Humidity 






755 (W) x 555 (H) [mm] • 29.7” (W) x 21.9” (H) 

750 (W) x 550 (H) [mm] • 29.5” (W) x 21.7” (H) 

approx. 800 mm (31.5”) 


250 kg (550 lbs) 



HI-MAT: 10 µSv (1 mrem) 



4 




4096 


1280 x 1024 / 24 bit 

VARI-MAT, O 2 , OS, HIGH, LOW, NEG, stepless, electronic Zoom: enlargement: up to 16 times 






CD/RW module 




< 65 dB(A) 

0° - 40°C / -20°C - +60°C 


standard: 100, 120, 200, 230, 240 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 

max. 2,2 kVA 

IP 20 / IP 43 





1) 


2) 



3) 


4) 


1445 

1085 

755 

555 

1535 

2605 

800 

3450+15 





22


HI-SCAN 

7555i 



• High-End processor technology 

• High-Speed digital signal transmission 

• HI-MAT Plus advanced material 


• High image resolution 

• 24 Bit real time image processing 

• New ergonomic user interface 

• Free programmable priority keys 

The HI-SCAN 7555i is a newly designed, 

compact x-ray inspection system with a tunnel 

opening of 755 mm (30“) wide by 555 mm 

( 22“) high. This tunnel size is ideally suitable 

for screening checked luggage and packages 

as well as briefcases, handbags and other 

small items. 

The HI-SCAN 7555i is part of the new iLane 

system concept, which offers various possibilities 

of exten-sion due to a modular, 

flexible system design. 

Online image analysis methods to support 

the operator´s work, and a new manmachine 

interface configured according to 

ergonomic aspects, are pointing the way to 

the future for this kind of system. Innovative 

technique and a high degree of reliability, 

make this system an excellent tool for covering 

sensitive fields of inspection. 

The equipment offers the operating personnel 

optimum support in making decisions 

and reduces inspection times considerably. 


23

Technical Data HI-SCAN 7555i 





Conveyor speed at mains frequency 

50 Hz / 60 Hz 






Film safety 

Duty cycle 










Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 



Humidity 






755 (W) x 555 (H) [mm] • 29.7” (W) x 21.9” (H) 

750 (W) x 550 (H) [mm] • 29.5” (W) x 21.7” (H) 

approx. 750 mm (29.5”) 

approx. 0.2 / 0.24 [m/s] 

160 kg (352 lbs) 







diagonal 


4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI-MAT, O2, OS, HIGH, electronic zoom: stepless enlargement up to 16-times 






CD/RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 




standard color(s): RAL 7016 (dark gray) / B11-W1 (blue) 

1) 


2) 



3) 


4) 






24


HI-SCAN 

7555si 



• New X-ray generator with optimized 

spectrum 

• New high resolution XADA sensor 

technology 

• New HiTraX II system platform with 

extended scope of services 

• High resolution image display with 

doubled resolution 

• Up to 37 mm steel penetration 

• Wire detectability up to AWG 41 

HI-SCAN 7555si is a consequent advancement 

of HI-SCAN 6040i, with more than 6000 

installations worldwide the most successful 

X-ray inspection system in its class. 

HI-SCAN 7555si, despite all similarities, is by 

far more than a conventional X-ray system 

with a facelift. Crucial technological innovations 

concerning X-ray sensor and image 

processing technologies were part of the 

R&D process. 

HI-SCAN 7555si is equipped with an advanced 

multi-energy X-ray generator, a new 

generation of electronics plus a completely 

novel high resolution detector line. Due 

to this optimized technology, the system 

demonstrates performance rates unachieved 

before. 

HI-SCAN 7555si produces extremely detailed 

X-ray images, which impress by a more than 

doubled number of real, physical pixels. The 

drastically enhanced image resolution of the 

scanned objects represents a decisive advantage 

for image evaluations in security areas. 

HI-SCAN 7555si additonally has a higher tunnel 

opening and therefore can scan objects, 

whose sizes exceed standard dimensions for 

hand luggage in the aviation industry. 

HI-SCAN 7555si - increased security by 

advanced technology. 


25

Technical Data HI-SCAN 7555si 





Conveyor speed at mains 

frequency 50 Hz / 60 Hz 







Film safety 

Duty cycle 


Anode voltage • Cooling 








Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 


Operating-/ storage temperature 

Humidity 



Protection class system/ keyboard 



755 (W) x 555 (H) [mm] • 29.7” (W) x 21.9” (H) 

750 (W) x 550 (H) [mm] • 29.5” (W) x 21.7” (H) 

approx. 755 mm (29.7”) 

approx. 0.2 / 0.24 [m/s] 

160 kg (352 lbs) 



test 1: AWG 40 5) / test 3: 1 mm horz./vert. 5) / test 4: 34 mm 5) 

HI-MAT: 1.8 µSv (0.18 mrem) 



160 kV cp • Hermetically sealed oil bath 

diagonal 

L-shaped detector line, high resolution 

4096 

B/W, color 

1280 x 1024 / 24 bit 








CD/RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 



steel construction with steel panels, mounted on rollers 


1) 


2) 



3) 


4) 


5) 






26

Technische Information 

HI-SCAN 

5180si 

HEIMANN RÖNTGENPRÜFSYSTEM 

Besondere Merkmale 

• Neuer Röntgengenerator mit optimiertem 

Spektrum 

• Neue hochauflösende XADA Sensortechnologie 

• Neue HiTraX II Systemplattform mit 

erweitertem Leistungsumfang 

• Hochauflösende Bilddarstellung mit 

verdoppelter Auflösung 

• Bis zu 37 mm Stahldurchdringung 

• Drahtauflösung bis AWG 40 

HI-SCAN 5180si ist die konsequente Weiterentwicklung 

des mit mehr als 6000 Installationen 

weltweit erfolgreichsten Röntgenprüfsystems 

seiner Klasse, HI-SCAN 5180i. 

Bei allen Gemeinsamkeiten ist HI-SCAN 

5180si weit mehr als nur ein konventionelles 

Röntgenprüfsystem mit Facelift. In die Entwicklung 

sind entscheidende technologische 

Innovationen aus den Bereichen Röntgensensorik 

und Bildverarbeitung eingeflossen. 

HI-SCAN 5180si ist mit einem weiterentwickelten 

Multi-Energie-Röntgengenerator, 

einer neuen Elektronik-Generation sowie 

einer völlig neuartigen hochauflösenden 

Detektorzeile ausgestattet. Aufgrund der 

optimierten Technologie überzeugt das System 

durch bislang nicht erreichte Leistungsdaten. 

HI-SCAN 5180si erzeugt äußerst detailreiche 

Röntgenbilder, die durch eine deutlich 

höhere Anzahl echter, physikalischer Bildpunkte 

bestechen. Die drastisch verbesserte 

Auflösung der durchleuchteten Objekte stellt 

einen entscheidenden Vorteil bei der Bildanalyse 

im Sicherheitsbereich dar. 

HI-SCAN 5180si - höhere Sicherheit durch 

bessere Technologie. 


27

Technische Daten HI-SCAN 5180si 

Hauptmerkmale 

Tunnelgröße 

Max. Objektgröße 

Förderbandhöhe 1) 

Bandgeschwindigkeit bei Netzfrequenz 

50 Hz / 60 Hz 

Max. Förderbandbelastbarkeit bei 

gleichmäßiger Belastung 

Auflösung (Drahterkennbarkeit) 2) 

Durchdringung (Stahl) 2) 

Röntgendosis / Inspektion (typisch) 

Filmsicherheit 

Betriebszyklus 

Röntgengenerator 

Anodenspannung • Kühlung 

Strahlungsrichtung 

Bildgebendes System 

Röntgenwandler 

Gespeicherte Graustufen 

Bilddarstellung 

Bildspeicher 

Bildauswertungsfunktionen 

Monitor 

Zusatzfunktionen 

Funktionen 

Optionen 

Installationsdaten 

Strahlungssicherheit 

CE-Kennzeichnung 

Schalldruckpegel 

Betriebs- / Lagertemperatur 

Luftfeuchtigkeit 

Stromversorgung 3) 

Leistungsaufnahme 

Schutzklasse Anlage / Tastatur 

Maße • Gewicht 4) 

Konstruktion 

517 (B) x 800 (H) [mm] • 20,4” (B) x 31,5” (H) 

510 (B) x 795 (H) [mm] • 20,1” (B) x 31,3” (H) 

ca. 232 mm (9,1”) 

ca. 0,2 / 0,24 [m/s] 

160 kg (352 lbs) 

Standard: 39 AWG (0,09 mm) • typisch: 40 AWG (0,08 mm) 

Standard: 35 mm • typisch: 37 mm 

Standard: 0,9 µSv (0,09 mrem) • mit HI-MAT: 1,7 µSv (0,17 mrem) 

garantiert bis zu ISO 1600 (33 DIN) 

100 %, keine Anlaufzeit nötig 

160 kV cp • hermetisch geschlossenes Ölbad 

diagonal 

abgewinkelte Detektorenzeile 

4096 

S/W, Farbe 

1280 x 1024 / 24 bit 

VARI, O 2 , OS, HIGH 

elektronischer Zoom: Stufenlos bis 64-fach 

LCD Flachbildschirm 

Einblendung von Datum/Uhrzeit, Gepäckstückzähler, Bediener-Identifikationsnummer, akustische Gepäckmarkierung, 

Betriebsmodus-Anzeige, REVIEW-Rückholfunktion vorheriger Bildteile, Zoom-Übersichtsbild, frei 

programmierbare Funktionstasten, USB 2.0 Schnittstelle, stufenloser Zoom 

X-ACT, HI-TIP, HI-SPOT, SEN, XPlore, IMS (Image Store System – speichert bis zu 100 000 Bilder), Xport, Media 

Bay für RIDA (250 GB), CD/RW Modul 

Entspricht allen anwendbaren Strahlungs- und Gesundheitsvorschriften für Strahlungsemissionseinrichtungen 

Entspricht den Richtlinien 2004/108/EG, 2006/42/EG, 2006/95/EG 

< 70 dB(A) 

0° - 40°C / -20°C - +60°C 

10% - 90% (nicht kondensierend) 

Standard: 230 VAC oder 120 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 

ca. 0,8 kVA 

IP 20 / IP 43 

3090 (L) x 1452 (B) x 1195 (H) [mm] • ca. 600 kg 

121,6” (L) x 57,2” (B) x 47,0” (H) • ca. 1322,8 lbs 

Stahlkonstruktion mit Stahlblechverkleidung, auf Rollen montiert 

Standardfarbe(n): RAL 7016 (Anthrazit) / B11-W1 (Blau) 

1) 

ca.-Angaben (einstellbar) 

2) 

proprietärer Testkörper (Qualitätsmanagement): Stahltreppe, 

CU-Drähte, Bandgeschwindigkeit 0,2 m/s 

3) 

andere Anschlußwerte optional 

4) 

ohne Bedienpult, Monitore etc. 

3090 

690 1680 720 

1452 

463 

90 

1108 

1195 

800 

517 

118 

55 

233 

643 

376 

484 

504 

450 

780 

450 

Für Informationen über Produkte, Vertrieb oder Dienstleistungen, besuchen Sie bitte www.smithsdetection.com/locations 


Änderungen vorbehalten. 95590356 16/05/2014 © Smiths Detection Group Ltd. - Abbildungen beinhalten teilweise Optionen 

HI-SCAN ist eine Handelsmarke der Smiths Detection Group Ltd. 

28


HI-SCAN 9075 


New: 160 kV X-ray source – typical steel penetration 30 mm 


• Ideal method of inspecting oversized 

and bulky freight 

• Ease of handling heavy goods via 

low conveyor belt 

• HiTraX technology employing realtime 

image processing 

• HI-MAT Plus : allows improved material 


• IMS: image data management 

(optional) 

HI-SCAN 9075 is a state-of-the-art X-ray 

inspection unit for the scanning of objects up 

to a size of 90 cm x 76 cm (w x h). Due to its 

design the imaging system is perfectly suited 

to the scanning of bulky objects, oversized 

baggage and freight. Heavy objects can be 

easily placed on the conveyor belt which is 

installed at a height of only 35 cm above the 

ground. 

The low installation height of the HI-SCAN 

9075 conveyor system facilitates the connection 

of supplementary feed- and/or discharge 

conveyor systems for heavy freight. 

The HI-SCAN 9075 is also available as mobile 

unit and as such is well-tried by airports, 

customs facilities and haulage companies. 

State-of-the-art HiTraX technology, efficient 

online image analysis methods as well as an 

operator interface ergonomically designed 

to be adapted to the installation conditions 

make the HISCAN 9075 an ultramodern and 

efficient instrument for security checks in 

sensitive areas. 

HI-SCAN 9075 - the security concept for 

dealing with oversized baggage and bulky 

objects. 


29

Technical Data HI-SCAN 9075 





Conveyor speed (adjustable with 

frequency converter) 






Film safety 

Duty cycle 










Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 



Humidity 






910 (W) x 770 (H) [mm] • 35.8” (W) x 30.3” (H) 

900 (W) x 760 (H) [mm] • 35.4” (W) x 29.9” (H) 

approx. 350 mm (13.7”) 

typical 0,25 [m/s] 

150 kg (331 lbs) 







diagonal 


4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI-MAT, O 2 , OS, HIGH, electronic zoom: stepless enlargement up to 16-times 






CD/RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 



approx. 1,0 kVA 

IP 20 / IP 43 




standard color: RAL 7016 (dark gray) 

1) 


2) 



3) 


4) 






30


HI-SCAN 

100100V 




• Universal X-ray system for largest 

variety of item dimensions 

• Excellent image presentation due to 

optimal X-ray geometry 

• Outstanding image quality with new 

HiTraX electronics 

• Wire detectability AWG 38 

• HR option for AWG 39 

• New HI MAT Plus technology for better 

material discrimination 

The HI-SCAN 100100V is specifically designed 

to meet the needs and applications of 

airports, customs facilities, transportation 

operations, carriers, parcel services or wherever 

high security and total screening of a 

large variety of dimensions is required. 

The HI-SCAN 100100V is a compact X-ray security 

screening system with tunnel dimensions 

of 1000 mm width by 1000 mm height. 

It permits the inspection of bulky as well as 

small items without any loss of X-ray image 

quality. 

For applications requiring a better wire 

recognition a high resolution detector line is 

available a an option, allowing for AWG 39. 

With an installation base of more than 70.000 

X-ray security units distributed throughout 

150 countries across all continents and a 

worldwide customer service network the 

Smiths Heimann is the unequalled world 

leader in supplying X-ray security systems. 

Operator training courses offered by Smiths 

Heimann have an excellent reputation all 

over the world and they are carried out individually 

for each customer. 

As the world’s leading supplier of X-ray inspection 

systems Smiths Heimann provides 

an efficient, global service network working 

fast and reliably. 


31

Technical Data HI-SCAN 100100V 





Conveyor speed (adjustable with frequency 

converter) 



Resolution (wire recognition) 

Resolution (wire recognition) (HR option) 




Film safety 

Duty cycle 










Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 



Humidity 






1010 (W) x 1010 (H) [mm] • 39.7” (W) x 39.7” (H) 

1000 (W) x 1000 (H) [mm] • 39.4” (W) x 39.4” (H) 

approx. 770 mm (30.3”) 

typical 0.2 [m/s] 

200 kg (440 lbs) 

standard: 36 AWG (0.13 mm Cu) • typical 2) : 38 AWG (0.1 mm Cu) 

standard: 38 AWG (0.1 mm Cu) • typical 2) : 39 AWG (0.09 mm Cu) 


Test 1: AWG 32 5) / Test 3: 1.6 mm horz./1.3 mm vert. 5) / Test 4: 30 mm 5) 





diagonal (from bottom to top) 


4096 

B/W, color 

1280 x 1024 / 24 bit 


electronic zoom: stepless enlargement up to 16 times 



mode, REVIEW-feature (to recall previously visible image areas), zoom overview, free programmable keys, 

USB 2.0 interface, stepless zoom 


CD/RW module, High resolution (HR) detector line 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 





1) 


2) 



3) 


4) 


5) 


770 

1010 

1010 

1940 

661 

2080 

3585 

1280 





32


HI-SCAN 

100100 T 





baggage and freight 





• Wire detectability AWG 38 


material distinction 

HI-SCAN 100100T is a state-of -the art X-ray 

inspection system for the scanning of objects 

up to a size of 100 X 100 cm. 

The HI-SCAN 100100T is specially designed 

to meet the needs and applications 

of airports, customs facilities, transportation 

operations, carriers, parcel services or 

wherever high security and total screening of 

large objects are required. 

The low installation height of the HI-SCAN 

100100T conveyor system facilitates the connection 


conveyor systems for heavy freight. 

With an installation base of more than 37,000 

X-ray security units distributed throughout 

150 countries across all continents and a 

worldwide customer service network the 

Smiths Heimann is the unequalled world 

leader in supplying X-ray security systems. 



over the world, and they are carried out 

individually for each customer. 

As the world’s leading supplier of X-ray inspection 

systems Smiths Heimann provides 




33

Technical Data HI-SCAN 100100T 









Resolution (wire detectability) 




Film safety 

Duty cycle 










Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 



Humidity 






1010 (W) x 1010 (H) [mm] • 39.7” (W) x 39.7” (H) 

1000 (W) x 1000 (H) [mm] • 39.4” (W) x 39.4” (H)) 

approx. 330 mm (13.0”) 


200 kg (440 lbs) 



Test 1: AWG 30 5) / Test 3: 1.6 mm horz./2.0 mm vert. 5) / Test 4: 26 mm 5) 





diagonal (from top to bottom) 


4096 

B/W, color 

1280 x 1024 / 24 bit 







X-ACT, HI-TIP, HI-SPOT, SEN, XPlore, IMS (image management system), Xport, Media Bay for RIDA (250 GB), CD/ 

RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 




Standard color: RAL 7016 (dark gray) 

1) 


2) 



3) 


4) 


5) 






34


HI-SCAN 

100100V-2is 




• Ideal method of inspecting parcels 

and packages 

• Dual View shortens inspection times 

• Smallest footprint in it’s range 

• Lowered conveyor height of 60 cm 

• Extended conveyor load of 220 kg 

• Typical steel penetration of 37 mm 

in view A and B 

• Ideal for inspecting break bulk 

cargo 

HI-SCAN 100100V-2is is especially designed 

to meet the requirements and needs of 

airports, customs facilities, carriers, parcel 

services or wherever high security of a large 

variety of dimensions is required. 

The HI-SCAN 100100V-2is equipped with two 

160kV generators in a 90° opposition thus 

providing a horizontal and vertical view of the 

screened object (Dual View). This particular 

screening method facilitates reliably inspections 

of tightly packed objects in one process 

while shortening inspection times. 

Its compact system design provides highest 

performance on smallest footprint. Additionally, 

the optimised conveyor load of 220 kg allows 

the fast screening of break bulk cargo. 


35

Technical Data HI-SCAN 100100V-2is 












Film safety 

Duty cycle 



Beam directions view A / view B 







Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 


Operating / storage temperature 

Humidity 






1010 (W) x 1010 (H) [mm] • 39.7” (W) x 39.7” (H) 

1000 (W) x 1000 (H) [mm] • 39.4” (W) x 39.4” (H) 

approx. 620 mm (24.4”) 


220 kg (485 lbs) 


standard (view A): 35 mm • typical (view A): 37 mm 

standard (view B): 35 mm • typical (view B): 37 mm 





view A: diagonal from side / view B: diagonal from bottom to top 


4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI-MAT, O 2 , OS, HIGH, REVIEW, LOW, NEG 

electronic zoom: stepless enlargement up to16 times 





X-ACT, HI-TIP, HI-SPOT, SEN, XPlore, IMS (Image Store System), Xport, Media Bay for RIDA (250 GB), CD/RW 

module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 


141.1” (L) x 60,2” (W) x 68.9” (H) • approx. 2315 lbs 



1) 


2) 



3) 


4) 






36


HI-SCAN 

100100T-2is 





baggage and freight 

• Dual view concept shortens inspection 

times 

• Easy handling of heavy objects due 

to low conveyor belt 

• Innovative user concept 



HI-SCAN 100100T-2is is an advancement of 

the HI-SCAN 100100T, especially designed 

for screening oversized baggage and bulky 

freight reaching up to 100 x 100 cm (39 x 39 

in.) in size. 

The HI-SCAN 100100T-2is is equipped with 

two generators arranged in a 90° opposition, 

thus beaming in two directions (Dual View). 

This particular screening mode facilitates 

reliable inspections of tightly packed objects 

in one process while shortening inspection 

times and increasing the effectiveness of the 

procedure. 

Its new, innovative user concept makes it as 

easy to handle as the single-beam system. 

Even with a second beam direction, this new 

system is compact and highly space-saving. 

Due to the low installation height of the HI- 

SCAN 100100T conveyor belt, the connection 


conveyor systems for heavy freight is simple. 

The HI-SCAN 100100T -2is is especially 

suited to meet the needs and applications 

of airports, customs facilities, and parcel 

services. 


37

Technical Data HI-SCAN 100100T-2is 












Film safety 

Duty cycle 










Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 



Humidity 






1010 (W) x 1010 (H) [mm] • 39.7” (W) x 39.7” (H) 

1000 (W) x 1000 (H) [mm] • 39.4” (W) x 39.4” (H) 

approx. 330 mm (13.0”) 


200 kg (440 lbs) 








view A: diagonal from side / view B: diagonal from top to bottom 


4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI-MAT, O 2 , OS, HIGH, REVIEW, LOW, NEG 

electronic zoom: stepless enlargement up to16 times 






RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP 43 

3758 (L) x 1595 (W) x 1900 (H) [mm] • ca. 1050 kg 

148,0” (L) x 62,8” (W) x 74,8” (H) • ca. 2315 lbs 


Standard color: RAL 7016 (dark gray) 

1) 


2) 



3) 


4) 






38


HI-SCAN 

130100T 


InLine Version version 


• Ideal method of inspecting Euro 

pallets and large freight 



• HiTraX technology employing realtime 

image processing 

• HI-MAT Plus : allows improved material 


• IMS: image data management 

(optional) 

• Ergonomically designed operating 

console features user-definable key 

functions 

HI-SCAN 130100T is a state-of-the-art X-ray 

inspection unit for the scanning of objects 

up to a size of 130 cm x 100 cm (w x h). Due 

to its design the imaging system is perfectly 

suited to the inspection of large objects, 

freight and Euro pallets. 

The heavy-duty conveyor belt which is 

installed at only 40 cm from the ground is 

designed to carry heavy loads enabling the 

checking of air- and sea freight by customs 

bodies and haulage companies and security 

checks on goods carried by civil aviation. 

In particular, the low installation height 

of the HI-SCAN 130100T conveyor system 

facilitates the handling of heavy objects and 

the connection of supplementary feed- and/ 

or discharge conveyor systems and freight 

weighing equipment. 

Online image analysis methods and the 

HiTraX operator interface ergonomically 

designed to be adapted to the installation 

conditions make the unit an ultramodern and 

efficient instrument for security checks in 

sensitive areas. 

HI-SCAN 130100T - the security concept for 

dealing with freight and Euro pallets. 


39

Technical Data HI-SCAN 130100T 












Film safety 

Duty cycle 










Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 



Humidity 






1310 (W) x 1020 (H) [mm] • 51.6” (W) x 40.2” (H) 

1300 (W) x 1000 (H) [mm] • 51.2” (W) x 39.4” (H) 

approx. 370 mm (14.6”) 


200 kg (441 lbs) 



standard: 0.8 µSv (0,08 mrem) • with HI-MAT:1.5 µSv (0.15 mrem) 




diagonal 


4096 

B/W, color 

1280 x 1024 / 24 bit 








CD/RW module 



< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP43 




standard color(s): RAL 7016 (dark grey), RAL B-11/W1 (blue) 

1) 


2) 



3) 


4) 






40


HI-SCAN 

130130T-2is 




• Especially developed for the integration 

into conveyor systems 

• Ideal method of inspecting europallets 

and freights 


times 


to low conveyor belt 

• HiTraX technology employing real 

time image processing 

• HI-MAT Plus technology for better 


HI-SCAN 130130T-2is is a state-of -the art 

X-ray inspection system for the scanning of 

objects up to a size of 130 cm x 130 cm (W 

x H). Due to its design the imaging system 

is perfectly suited to the inspection of large 

objects, freight and europallets. 

The particular advantage of the system is 

the equipment with two generators beaming 

in two directions (Dual View). The second 

beam direction is displaced at 90° and thus 

facilitates reliable inspections of even tightly 

packed objects in only one process while 

shortening inspection times and increasing 

the effectiveness of the procedure. 





Due to the low installation height of the 

HI-SCAN 130130T-2is conveyor belt, the 

connection of supplementary feed- and/or 

discharge conveyor systems for heavy freight 

is simple. 

HI-SCAN 130130T-2is - the security concept 

for handling freight and europallets. 


41

Technical Data HI-SCAN 130130T-2is 












Film safety 

Duty cycle 










Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 


Operating- / storage temperature 4) 

Humidity 






1310 (W) x 1320 (H) [mm] • 51.6” (W) x 52” (H) 

1300 (W) x 1300 (H) [mm] • 51.2” (W) x 51.2” (H) 

approx. 370 mm (14.6”) 


250 kg (550 lbs) 




standard: 1.6 µSv (0.16 mrem) • with HI-MAT: 3 µSv (0.3 mrem) 




VA: diagonal from side / VB: diagonal from top to bottom 


4096 

B/W, color 

1280 x 1024 / 24 bit 


electronic zoom: enlargement up to 16 times 






RW module) 


in compliance with guidelines 2004/108/EC, 2006/42/EC, 2006/95/EC 

< 70 dB(A) 

0° - 40°C / -20°C - +60°C 




IP 20 / IP43 



steel construction with aluminium housing, mounted on roller castors 


1) 


3) 

Conds.: steel step wedge, CU wires, belt speed 0.2 m/s 

4) 

extended temperature range on request 

5) 


6) 


2100 

2265 

1320 

1310 

3720 

370 





42

Technical Specifications 

HI-SCAN 

10080 EDX-2is 

HEIMANN X-RAY INSPECTION SYSTEM 


Screening objects transported in 

the cargo hold of airplanes has 

historically represented a major 

challenge to the aviation 

industry. The evolution of this 

requirement to include 100% 

inspection of these objects has 

now become a critical element 

in maintaining traveler confidence 

and assuring the future 

success of the aviation 

industry. 

The automatic explosive 

detection system HI-SCAN 

10080 EDX-2is represents the 

latest development of the 

proven Smiths Heimann 

detection technology. The 

• Automatic detection of explosives 

• Analysis of Zeff for efficient detection at low false alarm 

rates 

• High belt speed, thus high throughput up to 1,800 

items/h 

• EU standard 2-compliant (acc. to regulation 1448/2006) 

• Evaluation in real time 

• Specially designed for multi-level systems 

• Two high-resolution X-ray images (dual view) available 

for operator recheck 

• Fully integratable in automatic conveyor devices and 

networks for image distribution, system management, 

archiving and TIP 

abilities of the system help meet 

all requirements existing within 

a 100% screening environment. 

Using the latest developments in 

this sector, the EDX-2is offers 

major technological innovations 

with regard to the X-ray 

generator, the X-ray sensors and 

automatic image evaluation. 

Thus the EDX-2is is able to offer 

the highest detection rate in its 

class. 

With a tunnel opening of 107 cm 

in width and 81 cm in height, the 

system allows for the screening 

of oversized objects up to a 

length of 3.8 m, avoiding the 

need to divert to an alternate 

screening technology. Due to its 

detection capability, combined 

with a low false alarm rate, the 

system is able to screen up to 

1,800 bags per hour – setting a 

new standard for automated 

screening technology. 

The EDX-2is, operating at 0.5 m/ 

sec, has been specifically 

designed to meet the challenges 

of integration into automated 

conveyor systems. The EDX-2is 

can be integrated into existing 

or newly designed conveyor 

systems. Within the proven 

multi-level screening concept, 

all objects to be inspected are 

screened automatically for 

explosives by this high speed 

Level 1 system. Objects cleared 

by EDX-2is continue to their 

determined destination while 

the X-ray images of objects 

rejected in Level 1 are automatically 

diverted to a second 

security level for further 

evaluation. Should further 

inspection be necessary, the 

image and object are sent to 

Level 3. With lower throughput 

requirements for Level 3 

screeners, further technologies 

exist for this application and 

implementation will be depend 

on the security philosophy and 

regulations of the airport. 

Automation of the primary 

inspection process offers the 

added benefits of reducing staff 

requirements and recurring 

costs. 


43

Technical Specifications HI-SCAN 10080 EDX-2is 

Main features 

Tunnel dimensions (WxH) 

Max. object size (WxHxL) 


Belt speed 




Film safety 

Data recording mediums 

Duty cycle 

Automatic detection 

Real-time evaluation 

Throughput 

Gap between objects 

X-ray generator 

No. of X-ray generators 

Anode voltage 

X-ray tube 

Anode current 

Beam divergence 


Image generating system 



X-ray leakage 

CE conformity 


Operating temperature 2 ) 

Storage temperature 

Humidity 




Dimensions (LxWxH) 

Weight 4) 

Options 

Conveyor control 

1070 x 810 mm, 42.2” x 31.9” 

1060 x 800 x 3.800 mm, 41.7” x 31.5” x 149.6” 

approx. 800 mm, 31.5” 

0.5 m/s, 98.5 ft/min 

75 kg/m 2 , 165 lbs/m 2 

200 kg, 441 lbs total 

14 µSv / inspection 

also for highly sensitive films guaranteed up to ISO 1600 (33 DIN 

no damage to computer memories, such as cassettes, floppy disks or hard disks due to X-rays 

Reference: NSB Special Publication 500-101 

100% (approx. 2 min for boot procedure and self tests) 

by means of high performance parallel computing 

typical: 1200 to 1800 objects/h (object length 1300 mm to 800 mm, 51.2” to 31.5”)) 

min. 0.2 mm, 7.9” 

2 

max. 150 kV cp 

focus


HI-SCAN 

10080 EDtS 


Screening objects transported in 

the cargo hold of airplanes has 

historically represented a major 

challenge to the aviation industry. 

The evolution of this requirement 

to include 100% inspection of 

these objects has now become 

a critical element in maintaining 


traveler confidence and assuring 

the future success of the 

aviation industry. 

The automatic explosive detection 

system HI-SCAN 10080 

EDtS represents the latest development 

of the proven Smiths 

Heimann detection technology. 

• Automatic detection of explosives 

• Analysis of Zeff and density from independent views 

• High detection capability and low false alarm rate 

• High belt speed, thus high throughput up to 1,800 items/h 

• EU standard 2-compliant (acc. to regulation 1448/2006) 

• Evaluation in real time 

• Specially designed for multi-level systems 

• All 5 high-resolution X-ray images available for operator 

recheck 

• Fully integratable in automatic conveyor devices and 

networks for image distribution, system management, 

archiving and TIP 

The abilities of the system help 

meet all requirements existing 

within a 100% screening environment. 

Using the latest developments 

in this sector, the EDtS 

offers major technological innovations 

with regard to the X-ray 

generator, the X-ray sensors and 

automatic image evaluation. Thus 

the EDtS is able to offer the highest 

detection rate in its class. 

With a tunnel opening of 107 cm 

in width and 81 cm in height, the 

system allows for the screening 

of oversized objects up to a length 

of 3.8 m, avoiding the need to 

divert to an alternate screening 

technology. Due to its detection 

capability, combined with a low 

false alarm rate, the system is 

able to screen up to 1,800 bags 

per hour – setting a new standard 

for automated screening technology. 

The EDtS, operating at 0.5 m/sec, 

has been specifically designed to 

meet the challenges of integration 

into automated conveyor systems. 

The EDtS can be integrated 

into existing or newly designed 

conveyor systems. Within the 

proven multi-level screening 

concept, all objects to be 

inspected are screened automatically 

for explosives by this high 

speed Level 1 system. Objects 

cleared by EDtS continue to their 

determined destination while the 

X-ray images of objects rejected 

in Level 1 are automatically 

diverted to a second security level 

for further evaluation. Should 

further inspection be necessary, 

the image and object are sent to 

Level 3. With lower throughput 

requirements for Level 3 screeners, 

further technologies exist for 

this application and implementation 

will depend on the security 

philosophy and regulations of the 

airport. 

Automation of the primary inspection 

process offers the added 

benefits of reducing staff requirements 

and recurring costs. 


45

Technical Specifications HI-SCAN 10080 EDtS 

Main Features 

Tunnel dimensions (WxH) 

Max. object size (WxHxL) 

Unit width 

Unit height 

Unit length 

Length of X-ray protection tunnel, 

each 

Weight core unit 

Weight input-/ 

exit tunnel, each 

Service area 

Conveyor height 

Belt speed 

Automatic detection 

Throughput 

Gap between objects 

X-ray generator 

No. of X-ray generators 

Anode voltage 

Image generating system 



X-ray leakage 



Humidity 

Splash protection 

Power supply 

Options 

1070 x 810 mm, 42.1” x 31.9” 

1060 x 800 x 3800 mm, 41.7” x 31.5” x 149.6” 

2020 mm, 79.5” 

2000 mm, 78.7” 

3335 mm (core unit), 131.3” 

900 mm, 35.4” 2 ); 1400 mm, 55.1” 1 ) 

(can be erected over the conveyor of the existing baggage handling system) 

approx. 3900 kg, 8600 lbs 

approx. 500 kg, 1,110 lbs 2) 

approx. 635 kg, 1,499 lbs 1) 

1000 mm (both sides), 39.4” 

800 mm, 31.5” 

0.5 m/s, 98.5 ft/min 

up to 1800 objects per hour (with average object length of 800 mm, 31.5”) 

min. 200 mm, 7.9” 

3 

max. 150 kV cp 

5 L-shaped detector lines 


+5 °C to +40 °C 

-15 °C to + 60 °C (without UPS batteries)) 

10% - 90% (non-condensing)) 

IP 54 

400 V + 10% / -15%, 16 A (three-phase), 50/60 Hz ± 3 Hz, 8 kVA 

Other power requirements and temperature ranges on request 

System integration may be a critical requirement when providing airport security. The EDtS unit can be easily, and 

cost effectively, integrated into existing systems. 

1) 

standard unit 

2) 

optional tunnel 





46


HI-SCAN 10080 XCT 



• Dual-energy X-ray line scanner 

with full 3-D volumetric Computed 

Tomography (CT) imaging and 

reconstruction 

• Belt speed of 0.5m/s (98.5ft/min) 

• High throughput of up to 1800 bags 

per hour 

• Large 1070 x 810mm (42.1 x 31.9in) 

tunnel size 

• High resolution images 

EU EDS Standard 3 Approved 

EU EDS Standard 3 Approved 

TSA Lab Certified 


The HI-SCAN 10080 XCT is the next 

generation of high-speed checked 

baggage automatic explosives detection 

system from Smiths Detection. 

Developed to fulfill the ever demanding 

requirements of security authorities, 

airport operators and integrators, the 

HI-SCAN 10080 XCT provides unique 

performance capabilities based on Smiths 

Detection’s proven dual-energy X-ray line 

scanner with a proprietary single energy 

volumetric Computed Tomography (CT) 

scanner. 

The data generated by the two technologies 

in the HI-SCAN 10080 XCT provide the 

highest resolution images possible to 

optimize detection performance. The 2-D 

images from the dual-view, dual-energy 

line scanner are of the same high caliber 

you expect from Smiths Detection. The high 

resolution 3-D images from the CT scanner 

will also improve the on screen resolution 

at all levels. 

With a belt speed of 0.5m/s (98.5ft/min) the 

HI-SCAN 10080 XCT provides a throughput 

of up to 1800 bags/hour. The large 1070 x 

810mm (42.1 x 31.9in) rectangular tunnel 

size enables bags up to 1000 x 800mm 

(39.4 x 31.5) to be screened automatically 

at Level 1. These capabilities enable the 

HI-SCAN 10080 XCT to provide the most 

economical solution for airport checked 

baggage screening demands. 

The HI-SCAN 10080 XCT is designed to 

easily integrate into newly implemented 

Hold Baggage System (HBS) configurations 

or as a replacement for current baggage 

handling systems. Since many currently 

deployed baggage handling systems 

operate at 0.5m/s (98.5ft/min), installing 

the HI-SCAN 10080 XCT reduces 

infrastructure changes while meeting the 

next generation regulatory requirements. 

The HI-SCAN 10080 XCT is EU / ECAC 

EDS Standard 3 approved and has 

passed laboratory certification from the 

United States Transportation Security 

Administration (TSA). 

47

Technical Data HI-SCAN 10080 XCT 


Tunnel dimensions [WxH] 

1070 x 810mm (42.1 x 31.9in) 

Max. object size [WxHxL] 

1000 x 800 x 1600mm (39.4 x 31.5 x 63in) 

Out-of-Gauge (OOG) version object length up to 3800mm (149.6in) 

Conveyor height 

Minimum 700mm (27.6in) 

Belt speed 

0.5m/s (98.5ft/min) 

Throughput 

Up to 1800 items/h 

Max. conveyor load 75kg/m 2 (165lbs/m 2 ) 


200 kg (441lbs) total 

Duty cycle 100% 

X-ray Generating System 

No. of X-ray generators 3 




X-ray leakage 

CE conformity 


Operating temperature 


Humidity 

Power supply 


Protection class system 

Dimensions [WxHxL] 

Weight 

Photodiodes with highly efficient scintillators 

Meets all applicable laws and regulations with respect to X-ray emitting devices 

In compliance with requirements of 2006/42/EC, 2004/108/EC, 2006/95/EC 


HI-SCAN 

130130T-2is HD 


New: heavy duty roller conveyor – maximum load 3500 kg (1000 kg/m) 


• Heavy duty roller conveyor, maximum 

load 3500 kg (1000 kg / m) 

• Ideal method of inspecting europallets 

and freights 


times 


to low roller conveyor 

• HiTraX technology employing real 

time image processing 

• HI-MAT Plus technology for better 


HI-SCAN 130130T-2is-HD is a state-of-the 

art X-ray inspection system for the scanning 

of objects up to a size of 130 cm x 125 cm (W 

x H). Due to its design the imaging system 

is perfectly suited to the inspection of large 

objects, freight and europallets. 

The heavy duty roller conveyor allows the 

handling of heavy loads up to 3500 kg and 

therefore ideally suits the requirements for 

the inspection of heavy goods. 

The rugged conveyor design facilitates the 

use of forklifts and other heavy equipment to 

handle the goods to be inspected. 

The particular advantage of the system is 

the equipment with two generators beaming 

in two directions (Dual View). The second 

beam direction is displaced at 90° and thus 

facilitates reliable inspections of even tightly 

packed objects in only one process while 

shortening inspection times and increasing 

the effectiveness of the procedure. 





HI-SCAN 130130T-2is-HD- the security concept 

for handling freight and europallets. 


49

Technical Data HI-SCAN 130130T-2is HD 





Conveyor speed 





Film safety 

Duty cycle 










Monitor 


Features 

Options 


X-ray leakage 

CE-labelling 



Humidity 






1310 (W) x 1260 (H) [mm] • 51.6” (W) x 48” (H) 

1300 (W) x 1250 (H) [mm] • 51.2” (W) x 47.2” (H) 

approx. 430 mm (16.9”) 


max. 3500 kg / 7700 lbs (1000 kg/m / 671 lbs/ft) 

standard: 36 AWG (0.13 mm) • typical 2) : 38 AWG (0.1 mm) 



standard: 1.6 µSv (0.16 mrem) • with HI-MAT: 3 µSv (0.3 mrem) 




VA: diagonal from side / VB: diagonal from top to bottom 


4096 

B/W, color 

1280 x 1024 / 24 bit 






X-ACT, HI-TIP, HI-SPOT, SEN, XPlore, IMS (image store system), Xport, Media Bay for RIDA (250 GB) or CD/RW 

module 



< 60 dB(A) 

0° - 40°C / -20°C - +60°C 


standard: 230 VAC +10% / -15% • 50 Hz / 60 Hz ± 3 Hz 


IP 20 / IP43 


200” (L) x 82.7” (W) x 89.2” (H) • approx. 5952 lbs 

steel construction with aluminium housing, mounted on roller castors 


1) 


2) 



3) 


4) 






50


HI-SCAN 


145180-160kV 


• Universal X-ray system for palletized 

items 

• Excellent image presentation (optimized 

X-ray geometry) 



• New HI-MAT Plus technology for 

advanced material distinction 

• Typical penetration: 35 mm of steel 

The HI-SCAN 145180-160kV has been specially 

designed to meet the needs and applications 

of warehouses, carriers, forwarders 

and couriers for airports (palletized Lower 

Deck - Cargo). 

The HI-SCAN 145180-160kV is a low energy 

(160 kV) X-ray inspection system with tunnel 

dimensions of 1450 mm (57“) width and 1800 

mm (71“) height. It is especially suitable for 

the inspection of air cargo transported on 

standard Euro, British or US pallets. 



over the world and they are carried out individually 


As a leading supplier of X-ray inspection 

systems Smiths Heimann provides an efficient, 

global service network working fast 

and reliably. 


51

838 (33") 

Technical Data HI-SCAN 145180-160kV 




Conveyor type 








Film safety 

Duty cycle 










Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 


Humidity 



Protection class keyboard 



1450 (W) x 1800 (H) [mm] • 57” (W) x 70.9” (H) 

1440 (W) x 1700 (H) [mm] • 56.7” (W) x 66.9” (H) 

standard: heavy duty roller conveyor (capacity 2 t) 

option 1: modular plastic belt conveyor • option 2: heavy duty roller conveyor (capacity 3 t) 

approx. 315 mm (12.4”) 


standard: 2000 kg (4409 lbs) 

option 1 2) : 2000 kg (4409 lbs) • option 2 3) : 3000 kg (6614 lbs) 






160 kV cp operated • hermetically sealed oil bath 

diagonal 


4096 

B/W, color 

1280 x 1024 / 24 bit 

VARI, O 2 , OS, HIGH 






HI-TIP, HI-SPOT, SEN, XPlore, IMS (image management system), Xport, Media Bay for RIDA (250 GB), CD/RW 

module 


in compliance with guidelines 98/37/EWG, 73/23/EWG, 89/336/EWG 

0° - 40°C / -20°C - +60°C 



option 3) : 400 VAC • 3 phases • 50 Hz ± 3 Hz 

approx. 1.6 kVA (without options, with roller conveyor) 

approx. 1.8 kVA (without options, with modular plastic belt conveyor) 

approx. 3.5 kVA (without options, with heavy duty roller conveyor) 

IP 43 



option 1 2) 8) : 6185 (L) [mm] • 243.5” (L) 

option 2 3) : 5450 (L) [mm] • 214.6” (L) 


standard color(s): RAL 7016 (dark gray) 

1) 


2) 

option 1: modular plastic belt conveyor 

3) 

option 2: heavy duty roller conveyor (capacity 3 t) 

4) 

measured in beam direction 

5) 


6) 

optional: 100 VAC, 120 VAC, 200 VAC, 240 VAC 

also optional 3) : 200 VAC, 220 VAC, 380 VAC, 415 VAC, 480 VAC 

7) 


8) 

optional extension 800 mm (31.5”) available 

2140 (84") 

3679 (145") 

1450 (57") 

2300 (91”) 

1800 (71") 

5520 (217”) 

1331 (52") OPTION 

315 (12") 





52


HI-SCAN 

145180-2is 


Illustration contains option 


• Universal X-ray system for palletized 

items 


times 

• Excellent image presentation 

through optimized beam geometry 

• Rugged roller conveyor, capacity 

1000 kg / m, i.e. up to 5000 kg when 

evenly distributed 

• Meets TSA re quirements for skid 

size 1,2m x 1,2m x 1,65m, (48” x 

48” x 65”) 

• HI-MAT Plus technology for advanced 

material discrimination 

• Typical penetration: 37 mm of steel 

HI-SCAN 145180-2is a state-of-the-art X-ray 

inspection system for scanning objects up to 

a size of 145 cm x 180 cm (57”/ 71”) [W x H]. 

Due to the compact footprint and the large 

tunnel dimensions the imaging system is 

perfectly suited for the inspection of air 

cargo, freight and palletized goods. 

The HS 145180-2is is equipped with two 

160 kV generators in a 90° opposition thus 

providing a horizontal and a vertical view of 

the object (dual view). This particular screening 

method facilitates a reliable inspection 

of even tightly packed objects in only one 

process. The dual view concept shortens 

inspection times and increases the effectiveness 

of the screening procedure. 


easy to handle as the single-view system. 


system remains compact and highly spacesaving. 

The heavy duty roller conveyor (small pitch 

design) allows the screening of heavy 

objects; conveyor load up to 5000 kg (evenly 

distributed). 

HI-SCAN 145180-2is the security concept 

for handling air cargo, freight and palletized 

goods. 


53

Technical Data HI-SCAN 145180-2is 












Film safety 

Duty cycle 










Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 



Humidity 



Protection class system/keyboard 



1470 (W) x 1820 (H) [mm] • 57.8” (W) x 71.7” (H) 

1450 (W) x 1800 (H) [mm] • 57.1” (W) x 70.9” (H) 

approx. 570 mm (22.4”) 


5000 kg (11,025 lbs) • 1000 kg/m (672 lbs/ft) 

standard (view A): 36 AWG (0.13 mm) • typical (view A): 38 AWG (0.10 mm) 

standard (view B): 36 AWG (0.13 mm) • typical (view B): 38 AWG (0.10 mm) 



3.0 µSv (0.3 mrem) 



160 kV cp operated • hermetically sealed oil bath 

VA: diagonal from side • VB: diagonal from bottom to top 


4096 

B/W, color 

1280 x 1024 / 24 bit 







HI-TIP, HI-SPOT, SEN, XPlore, IMS (image management system), Xport, Media Bay for RIDA (250 GB) or CD/RW 

module 


in compliance with guidelines 2004/108/EC, 2006/42/EC, 2006/95/EC 

< 70 dB(A) 

0° - 40°C / -20°C - +60°C 



approx. 2.2 kVA (without options) 

IP 20/IP 43 


218.3” (L) x 85” (W) x 100.2” (H) • approx. 6600 lbs 



1) 

2) 

Conds.: steel step wedge, CU wires, conveyor speed 0.2 m/s 

3) 

4) 


5) 

approx. without control desk, keyboard, monitor(s), control 

cabinet, etc. 

6) 





54


HI-SCAN 


180180-300kV 


• Universal X-ray system for bulk 

items 

• Excellent image presentation (optimal 

X-ray geometry) 



• New HI-MAT Plus technology for better 


• Typical penetration 75 mm of steel 

The HI-SCAN 180180-300kV is specially 

designed to meet the needs and applications 

of airports, customs facilities, transportation 

operations, carriers, parcel services or 

wherever high security and total screening is 

required. 

It is a compact medium energy (300 kV) 

X-ray cargo inspection system with tunnel 

dimensions of 1800 mm (71”) width and 1800 

mm (71”) height. It permits the inspection of 

pallets and LD-3 airfreight containers. 



over the world and are carried out individually 


As a leading supplier of X-ray inspection systems 

in the world Smiths Heimann provides 




55

Technical Data HI-SCAN 180180-300kV 




Conveyor type: 








Film safety 

Duty cycle 


Anode voltage • current • cooling 








Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 


Humidity 






1810 (W) x 1810 (H) [mm] • 71.3” (W) x 71.3” (H) 

1790 (W) x 1700 (H) [mm] • 70.4” (W) x 66.9” (H) 

standard: roller conveyor 

option 1: modular plastic belt conveyor • option 2: heavy duty roller conveyor 

approx. 315 mm (12.4”) 

standard 0.24 [m/s] • option 0.12 [m/s] complies to EU 781/2005 (also to the respective standards will be effective 

from 01.01.2009) 

standard: 2000 kg (4409 lbs) 

option 1 2) : 2000 kg (4409 lbs) • option 2 3) : 3000 kg (6614 lbs) 


standard (view A): 70 mm • typical: 75 mm 




300 kV cp • 1 mA • hermetically sealed oil bath 

diagonal 


4096 

B/W, color 

1280 x 1024 / 24 bit 







HI-SPOT, SEN, XPlore, IMS (image management system), Xport, Media Bay for RIDA (250 GB), CD/RW module 


in compliance with guidelines 98/37/EWG, 72/23/EWG, 89/336/EWG 

0° - 40°C / -20°C - +60°C 


400 VAC, 3 phases • 50 Hz / 60 Hz ± 3 Hz 

approx. 2.8 kVA (without options, with roller conveyor) 

approx. 2.8 kVA (without options, with modular plastic belt) 

approx. 3.5 kVA (without options, with heavy duty roller conveyor) 

IP 43 



option 1 2) 8) : modular plastic belt conveyor: 7620 (L) [mm], 300” (L) 



1) 


2) 

option 1: modular plastic belt conveyor 

3) 

option 2: heavy duty roller conveyor 

4) 

steel stepwedge min. dimensions: 250 x 540 [mm] (W x L) 

5) 


6) 

optional: 200 VAC, 220 VAC, 380 VAC, 415 VAC, 480 VAC 

7) 


8) 

optional extension 800 mm (31.5”) available 

appr. 3440 mm 

appr. 2370 mm 

appr. 315 mm 

appr. 1722 mm appr. 1722 mm 

Input Roller 

optional 

appr. 5200 mm 

appr. 7040 mm 

Output Roller 

optional 





56


HI-SCAN 


180180-2is pro 


• Dual View X-ray system for consolidated 

and palletized goods 

• Excellent image presentation 

through optimized beam geometry 

• Rugged roller conveyors for loads 

up to 5000 kg/m when evenly distributed 

• Tunnel dimension allows for 

screening the max. skid size of 

1,22 m x 1,22 m x 1,65 m (W x L x H) 

and LD3 containers 

• Typical penetration: 75 mm of steel, 

typical-wire resolution AWG 37 

The HI-SCAN 180180-2is pro has especially 

been designed for the inspection of largescale 

consolidated and palletized goods, with 

tunnel dimensions to allow screening of LD3 

containers. 

Based on a dual-view concept, the system 

provides two independent views of the 

screened goods, shifted by 90°, allowing a 

precise and reliable image evaluation. 

HI-SCAN 180180-2is pro offers excellent 

detection capabilities and outstanding image 

quality. 

The two powerful 300 kV X-ray generators 

are capable of penetrating even large and 

dense objects reducing re-inspection times. 

Consolidated cargo does not need to be broken 

down into smaller items, thus keeping 

the inspection process fast and efficient. 

The small pitch roller conveyors ensure a 

smooth passage of the scanned goods without 

disruption and support a total load of up 

to 5000 kg/m (evenly distributed). 

The compact footprint minimizes the 

required floor space, keeping the lifecycle 

costs low. 

The HS 180180-2is pro is a powerful tool for 

the air cargo industry, including forwarders 

and regulated agents. It is also suitable 

for customs purposes and for screening 

received or outgoing goods in critical infrastructure 

applications. 

HI-SCAN 180180-2is pro provides better 

security and operational efficiency when 

it comes to the inspection of cargo and air 

cargo. 


57

Technical Data HI-SCAN 180180-2is pro 




Conveyor type 



max. conveyor load even 


Penetration (steel) 

Internal X-ray dose (typical) 

External X-ray dose 

Film safety 

Duty cycle 



Beam direction view 1 / view 2 







Monitor 


Functions 

Options 


X-ray leakage 

CE-labelling 


Humidity 






1810 (W) x 1821 (H) [mm] • 71.3” (W) x 71.7” (H) 

1790 (W) x 1700 (H) [mm] • 70.5” (W) x 66.9” (H) 

small pitch roller conveyor 

approx. 840 mm (33.1”) 

standard 0.24 [m/s] 

0,75 t/m (504 lbs/ft), 5000 kg evenly distributed over the whole conveyor 



approx. 14 µSv (1.4 mrem) 

standard:


CIP-300 

CAR INSPECTION PORTAL 300kV 


• Compact, optimized design 

• High throughput due to “drive 

through” mode 

• Optional: Vehicle transport system 

• Various options allow adaptation to 

individual requirements 

• Small footprint 

• Excellent image quality 

• Proven Smiths Heimann HiTraX 

technology 

• Penetration typically 60 mm steel 

The Car Inspection Portal CIP-300 has 

specifically been designed for the screening 

of cars, light motor vehicles and mini busses 

for car bombs and smuggled goods. The 

portal’s clearance allows the passage of 

vehicles of up to 2.5m in width, 3.1m in 

height and a length of 7m, while the max. 

weight can be up 3.5 tons. 

The system is based on the reliable and 

proven Smiths Heimann HiTraX technology. 

CIP-300 embodies a basic system for easy 

and immediate use. 

Thanks to the low energy 300kV X-ray source 

the vehicle scanner can be used in a “drive 

through” mode where compliant with local 

regulations. The “drive through” mode 

provides a high throughput as the inspection 

is carried out continuously while traffic lights 

accurately control the inspection process. 

Where drive through operation is not 

feasible, the CIP-300 can be equipped 

with an optional vehicle transport system, 

allowing the inspection of the unmanned 

vehicle at a constant speed. 

Various operating concepts and available 

options facilitate the integration of the 

CIP-300 in existing infrastructures and allow 

the adaptation to the designated application. 

With the beam geometry of a symmetric top 

view the CIP-300 is perfectly suited for the 

inspection of cars and light motor vehicles, 

offering an excellent image quality at 

minimized distortion. 

In combination with the state-of-the-art 

HiTraX technology the CIP-300 provides 

an efficient and flexible solution as for the 

protection of critical infrastructures such as 

governmental facilities, military checkpoints, 

nuclear power plants etc. as well as land and 

sea borders. 


59

Technical Data CIP-300 


System dimensions 

Max. vehicle size 

Scanning speed (drive through) 

Scanning speed (conveyor) 

Penetration 




X-ray dose (drive through) 



Data storage 

Workstation 

Image evaluation 


Options 

Health and Safety 

Radiation safety 

CE-labelling 


Operating-/storage temperature 4) 

Humidity 

Power supply 



Exclusion zone 

6.1 (W) x 4.9 (H) x 2.5 (L) [m] • 20.0 (W) x 16.1 (H) x 8.2 (L) [ft] 

2.5 (W) x 3.1 (H) x 7.0 (L) [m] • 8.2 (W) x 10.2 (H) x 23.0 (L) [ft] 

Approx. 8 km/h (5 mph) 

0.2 m/s (0.7 ft/s) 

60 mm (2.4”) 


From top to bottom (symmetrical) 

< 0,1 µSv / inspection 

U-shaped detector line, ceramic scintillator • high resolution (2.5 mm pixel width) 

13000 images standard, others on request • data archiving with DVD burner 

2 x 24”, 1920 x 1200 pixels, LCD screen 

1 x image interpretation 

1 x monitoring (4x CCD camera, light barriers, sensor system) 

MAT, HIGH, LOW, NEG, SEN, VARI-CAT, REVIEW, ZOOM 

Vehicle transport system 

Operator compartment 

Remote operator room (up to 100 m, other distances on request) 

Extreme temperature package 

In compliance with ANSI 43.17, WHO, ICRP-60 13-17, EU & US guidelines 

In compliance with guidelines 2004/108/EC, 2006/42/EC, 2006/95/EC 

-20° - 45°C / -23°C - +60°C • -4°F - 113°F / -9°F - 140°F 


400 VAC ±15%, 3-phase 50Hz / 60 Hz ±3 Hz 

Approx. 12 kVA 

IP 44 

Approx. 10m x 10m • 33ft x 33ft 

4) 






60


CXS 

Networking 

HEIMANN NETWORKING MANAGEMENT PACKAGE 

FOR CONVENTIONAL X-RAY SYSTEMS 

CXS 1 

CXS 2 

CXS 3 

LAN 

Fast Ethernet 

HMC 

Heimann 

Management 

Console 

CXS 4 

HMS 

Heimann 

Management 

Server 

CIDA 

Central Image 

Data Archive 


• Comprehensive tool for managing 

X-ray units 

• User management 

• TIP management and reporting 

• Operational statistics 

• Remote diagnosis 

• Image management 

The Management Package (MP) is a complete 

tool for the management of networked 

HI-SCAN X-ray inspection systems. It allows 

managers of security checkpoints to control 

from centralized locations all the management 

functions related to the operation of X- 

ray units. Functions like user management, 

TIP management or operational statistics 

can be controlled or monitored with the MP. 

The MP is the ideal solution for facilities 

with many X-ray systems, whether they are 

centralized in one location or distributed 

amongst different sites. It improves operational 

efficiency by providing a single tool for 

managing all X-ray units simultaneously. 

With more than 32 000 units installed worldwide, 

Smiths Detection is the world’s leading 

provider of X-ray security systems and trace 

detection equipment. 


61

Technical Data CXS Networking 

Software Applications 

System Administration 

Statistics and Reports 

Configuration 

TIP Library Management 

Image Management 

Backup and Recovery 

Management of users and x-ray units 

Statistics and reports on users and equipment (including TIP reports) 

Management of X-ACT and TIP parameters 

Creation and distribution of TIP libraries to X-ray units 

Management of X-ray images stored on X-ray units, local server or CIDA. 

Backup of user, TIP and event databases 

Networking Management Package Description 

MPM 

(Management Package Medium) 

MPL 

(Management Package Large) 

For networks of up to 25 HI-SCAN units 

Included: Server and Software license for up to 25 units. 

Software pre-installed and tested on hardware. 

For networks of more than 25 HI-SCAN units 

Included: Server, Workstation and Software license for 26+ units. 

Software pre-installed and tested on hardware. 

Note: Additional workstations available 


Server (HMS) 1) 

Workstation (HMC) 1) 

Options 

Networking hardware kit 

CIDA 

(Centralized Image Data Archive) 

Minimum Technical Requirements 

HI-SCAN systems (hardware) 

HI-SCAN systems (software) 

Network 

Siemens Primergy 19” rack with Linux, keyboard, mouse and 17” TFT monitor. 

Incent.view, please see Technical Information “Incent.view” (no. 95593506) for further information, keyboard, 

mouse and 17” TFT monitor. 

T-Box 10 cabinet including fan cooling unit, Switch 24-port, UPS APC 750VA 19” 1HE, Cables monitor/keyboard 5m. 

Available for both MPM and MPL. 

Server, switch and UPS are mounted and tested in the T-Box 10 cabinet. 

Compliant with 73/23/EEC Directive Low Voltage and 89/336/EEC Directive EMC. 

Dimensions of T-Box 10 Cabinet: 560mm (L) x 600mm (H) x 800mm (W) 

Provided on request. Technical Specifications of CIDA Server depend on the system layout. 

HiTraX controller with network interface and min. 128MB RAM 

HX-03-02-I and above 

Note: HiTraX and HMS software must be compatible versions. 

100Mbit Class C Network, Fast Ethernet IEEE 802.3u 

Switched Ethernet 

Multicast domain address available 

A subnet is reserved for SH components only 

1) 

technical design may vary 




CXS is a trademark of Smiths Detection Group Ltd. 

62

Technical Specification 

MatriX Server Small 

SOLUTION FOR IMAGE DISTRIBUTION 

Connects up to 

5 X-ray units 

10 Analyst Workstations 

1 HMC Workstation 

Includes 

HMS 

MS 

Network switches 

• Hardware and software for optimal image distribution and system control 

• Management server provides large range of administration functions, statistics reports and TIP 

functionality 

• Scalable, numerous options available 

• Reliability and durability due to high-quality server, network and switch cabinet technology 

• Supports up to 5 X-ray units, 10 analyst stations, 1 management workstations and 

• 1 central printer 


63


The MatriX Server Cabinet connects the X-ray units and Operator Workstations to manage the 

distribution of images and results within a multi level hold baggage screening system. 

Each Airport does have individual requirements for the HBS image routing. The MatriX Server 

meets this from a large set of standard configurations allowing result and machine dependant 

routing of images, group routing, time out management and workstation load distribution, all 

implemented in this unique piece of software. Furthermore a basic statistics monitor, diagnosis 

and system status information are provided on the administration display. 

The high level of reliability of the MatriX Server function is based on the usage of highest quality 

components.The MatriX Server is based on commercially available standard hardware selected for 

maximum performance and reliability. The 19” cabinet houses the actual MatriX Server computers, 

network switches and an operator console for administrative and maintenance tasks together with 

the related UPS, internal power and network cabling. 

The MatriX Server is assembled and configured according to the customer specific needs in the 

Smiths Heimann factory. The out of factory testing program ensures a ready for operation system 

is delivered to site. 

MatriX Server Small supports up to: 

5 X-ray units + 10 analyst stations + 1 management workstation HMC + 1 central printer 

Modifications reserved 95593932 23/07/2012 © Smiths Heimann - In some cases, the figures contain options 

64


Hardware and software for optimal image distribution and system control: The software specially 

designed and optimised for this application controls the image distribution and transmission 

of results within the system. High-quality, application-specific and tested server and network 

technology guarantees the reliable transport of image and control data. 

HMS, the Heimann Management Server for system configuration and monitoring. The server 

provides a large range of administrative functions, statistics reports and TIP functionality. These 

can be recalled over the local HMC console or via the entire network from an optional HMC. 

Reliability and durability due to high-quality server, network and switch cabinet technology: 

Exclusively brand-name products of leading manufacturers are used which proved successful 

in demanding tests. This guarantees a long-standing availability of all core components and 

maximum manufacturing quality. The switch cabinet design meets all relevant safety standards, 

regulations and rules. 

Individual configuration: The standard configuration provides a range of standard routing rules 

which can also cover very special processes. This is additionally optimised by the project-specific 

adaption of time parameters according to the specific customer requirements. 

Maintenance access: Two lockable doors the front side of which is made of glass secure the access 

to the maintenance console which is equipped with a 17“ TFT monitor, keyboard and trackball and 

provides detailed status and system information. 

UPS: The entire switch cabinet electronics are supplied via several UPS. They supply the system in 

case of a voltage breakdown with a hold-up time of up to 5 minutes. This secures the cushioning 

when the airport supply is switched over, or in case of short voltage drops. In case of a longerlasting 

power failure, a controlled shutdown takes place and the system is automatically restarted 

after the power supply is restored. 

Scalable architecture, numerous options available. Cost-effective modifications and special 

solutions can be implemented on the basis of the standard system. 

Available options MatriX Server Small 

Air-conditioning 

Single-mode optical fibre technology: 

Foreign network connection 

More X-ray units 

Cold Standby Kit 

Auxiliary device to extend the temperature range 

Allows for the connection of units over distances 

greater than 1000 m 

Installation of a special hardware firewall and 

configuration of special communications, e. g. for 

time synchronization or to exchange results with 

the airport computer 

Depending on the application, other combinations 

of X-ray units. analyst stations and management 

workstations can possibly be connected on the 

basis of the same system. 

Replacement hardware kit to restore operation 

quickest possible in case of hardware failures. 

Consisting of pre-configured server and network 

hardware. 


65


Technical Data MatriX Server Small 

Dimensions 

60 cm x 100 cm x 195 cm 

Total weight 

Approx. 400 kg 

Cabinet colour RAL 7035 

Cabinet access 

Lockable doors. Glass front door. 

Weight of crated cabinet 

Approx.600 kg 

Dimensions of crated cabinet 

Approx.80 cm x 120 cm x 230 cm 


+5°C to +25°C 


-15°C to +45°C 

Humidity 

10% to 90%, non-condensing 

Power requirement 

230V +10%/-15%, 50-60Hz, N/PE, Fuse 16A 


max. 2400W 

UPS performance 

Up to 5 minutes supply of complete cabinet 

Supported x-ray units 

Up to 5 units via multimode fibre optics connections 

Supported Level 2 workstations 

Up to 8 units via CAT5 connections 



Supported Management workstations 

Up to 1 HMC via CAT5 connection 

Supported network printers 

Up to 1 network printer via CAT5 connection 

Included Products 

Single Matrix Server + HMS + HMC 

Hardware and all software licences included 

Network 

Ethernet based switching technology with sufficient ports 

and speed 

Routing modes 

Large number of standard routing modes available with 

customer specific timing configuration 

Power connector 

Terminals inside cabinet 

Fibre optics cable connection 

Patch panel inside cabinet, ST or SC connectors 

CAT5 cable connection 

Patch panel inside, terminals 

Server hardware 

Siemens TX150 Series or better 

Processor, memory, network, hard disk, optical drives Compliant 

Operating systems 

Windows 2008 Server (or better) + Linux 

Administration console 

17” TFT screen, lockable keyboard with trackball, KVM 

switch 


66


MatriX Server Medium 



10 X-ray units 


2 HMC Workstation 

Includes 

CIDA 

HMS 

MS Redundant 

Network Switches Redundant 


• Management server provides large range of administration functions, statistics 

reports and TIP functionality 


• Reliability and durability due to high-quality server, network and switch cabinet 

technology 

• Supports up to 10 X-ray units, 20 analyst stations, 2 management workstations 

and 2 central printers 


67










components.The MatriX Server is based on high performance hardware selected for maximum 

performance and reliability. The 19” cabinet houses the actual MatriX Server computers, network 

switches and an operator console for administrative and maintenance tasks together with the 

related UPS, internal power and network cabling. 




MatriX Server Medium supports up to: 

10 X-ray units + 20 analyst stations + 2 management workstations HMC + 2 central printers 

68 

Modifications reserved 95593933 23/07/2012 © Smiths Heimann - In some cases, the figures contain options



designed and optimised for this application controls the image distribution and transmission of results 

within the system. High-quality, application-specific and tested server and network technology guarantees 

the reliable transport of image and control data. 

HMS, the Heimann Management Server for system configuration and monitoring. The server provides a 

large range of administrative functions, statistic reports and TIP functionality. These can be accessed over 

the local HMC Console or via the entire network with an optional HMC management workstation. 

Reliability and durability due to high-quality server, network and switch cabinet technology: High quality 

server components are used which proved successful in demanding tests. These components provide a 

long-standing availability of all core components and maximum manufacturing quality. The switch cabinet 

design meets all relevant safety standards, regulations and rules. 

Individual configuration: The standard configuration provides a range of standard routing rules which can 

also cover very special processes. This is additionally optimised by the project-specific adaption of time 

parameters according to the specific customer requirements. 

Maintenance access: Lockable glass doors at the front side enable access to the maintenance console. 

which is equipped with a 17“ TFT monitor, keyboard and trackball and provides detailed status and system 

information. 

UPS: The entire switch cabinet electronics are supplied via several UPS. They supply the system in case 

of a voltage breakdown with a hold-up time of up to 5 minutes. This secures the cushioning when the 

airport supply is switched over, or in case of short voltage drops. In case of a longer-lasting power failure, 

a controlled shutdown takes place and the system is automatically restarted after recovery of the power 

supply. 

Scalable architecture, numerous options available. Cost-effective modifications and special solutions can 

be implemented on the basis of the standard system. 

CIDA, the central image storage archive function saves the images from the x-ray machines in real time 

on a central storage device. Oldest images are deleted automatically, typically the last 500,000 images 

are stored. The image management function IMM as part of the HMS provides an effective management 

function of this image data base. 

Redundant Matrix Server Hardware with automatic failover function further increases the level of 

resilience. In the unlikely event of a failure of the core Matrix Server function, an industry standard piece of 

software detects this condition and without any user intervention switches to the backup system. 

Available options MatriX Server Medium 



External network connection 

More connected X-ray units 





configuration of special communications, e. g. for time 

synchronization or to exchange results with the airport 

computer 


of X-ray units. analyst stations and management 

workstations can possibly be connected on the basis of 

the same system. 


69


Technical Data MatriX Server Medium 

Dimensions 

140 cm x 100 cm x 195 cm 

Total weight 

Approx. 600 kg (per cabinet) 





Approx. 800 kg 


Approx.170 cm x 120 cm x 230 cm 


+5°C to +25°C 


-15°C to +45°C 

Humidity 



2x most independent 

230V +10%/-15%, 50-60Hz, N/PE, Fuse 16A 


max. 3400W 














Redundant Matrix Server + HMS + CIDA + HMC 


CIDA capacity 

Typically 500,000 images (integrated dual view x-ray 

units). Actual number dependant on size of images 

Automatic Failover Time 

Typically 3-60 seconds, depending on type of failure 

Network 

Redundant Ethernet based switching technology with 

sufficient ports and speed 

Routing modes 
















switch 


70


MatriX Server Large 



20 X-ray units 


4 HMC Workstations 

Includes 

CIDA 

HMS 

MS Terminal Redundant 

Network Switches 

Terminal Redundant 


• Management server provides large range of administration functions, statistics reports and TIP 

functionality 


• Extremely high redundancy due to spatially separated server technology 

• Reliability and durability due to high-quality server, network and switch cabinet technology 

• Supports up to 20 X-ray units, 40 analyst stations, 4 management workstations and 4 central printers 


71










components.The MatriX Server is based on commercially available standard hardware selected for 

maximum performance and reliability. The 19” cabinet houses the actual MatriX Server computers, 

network switches and an operator console for administrative and maintenance tasks together with 

the related UPS, internal power and network cabling. 




MatriX Server Large in two spatially separated cabinets supports up to: 

20 X-ray units + 40 analyst stations + 4 management workstations HMC + 4 central printers 


72



designed and optimised for this application controls the image distribution and transmission of results 

within the system. High-quality, application-specific and tested server and network technology guarantees 

the reliable transport of image and control data. 

HMS, the Heimann Management Server for system configuration and monitoring. The server provides a 

large range of administrative functions, statistic reports and TIP functionality. These can be recalled over 

the local HMC or via the entire network from an optional HMC. 

Reliability and durability due to high-quality server, network and switch cabinet technology: Exclusively 

brand-name products of leading manufacturers are used which proved successful in demanding tests. This 

guarantees a long-standing availability of all core components and maximum manufacturing quality. The 

switch cabinet design meets all relevant safety standards, regulations and rules. 

Individual configuration: The standard configuration provides a range of standard routing rules which can 

also cover very special processes. This is additionally optimised by the project-specific adaption of time 

parameters according to the specific customer requirements. 

Maintenance access: Lockable doors the front side of which is made of glass secure the access to the 

maintenance console which is equipped with a 17“ TFT monitor, keyboard and trackball and provides 

detailed status and system information. 

UPS: The entire switch cabinet electronics are supplied via several UPS. They supply the system in case 

of a voltage breakdown with a hold-up time of up to 5 minutes. This secures the cushioning when the 

airport supply is switched over, or in case of short voltage drops. In case of a longer-lasting power failure, 

a controlled shutdown takes place and the system is automatically restarted after the power supply is 

restored. 

Scalable architecture, numerous options available. Cost-effective modifications and special solutions can 

be implemented on the basis of the standard system. 

CIDA, the central image storage archive function saves the images from the x-ray machines in real 

time on a central storage device. Typically the last 1,000,000 images are stored. Old images are deleted 

automatically. The image management function IMM that comes as part of the HMS provides an effective 

management function for of this image data base. 

Redundant Matrix Server Hardware with automatic failover function has an even higher level of resilience 

by special separating the redundant parts into two cabinets. In the unlikely event of a failure of the core 

Matrix Server function, an industry standard piece of software detects this condition and without any user 

intervention switches to the backup system. 

Available options MatriX Server Large 



External network connection 

More X-ray units 





configuration of special communications, e. g. for 

time synchronization or to exchange results with 

the airport computer 


of X-ray units, analyst stations and management 

workstations can possibly be connected on the 

basis of the same system. 


73


Technical Data MatriX Server Large 

Dimensions 

140 cm x 100 cm x 195 cm (per cabinet) 

Total weight 








Approx. 170 cm x 120 cm x 228 cm (per cabinet) 


+5°C to +25°C 


-15°C to +45°C 

Humidity 



2x most independent (per cabinet) 

230V +10%/-15%, 50-60Hz, N/PE, Fuse 16A 


max. 2x 3400 W (per cabinet) 














Redundant Matrix Server + HMS + 2x CIDA + HMC 


CIDA capacity 

Typically 1,000,000 images (integrated dual view x-ray 

units). Actual number dependant on size of images 

Automatic Failover Time 

Typically 3-60 seconds, depending on type of failure. 

Network 

Redundant Ethernet based switching technology with 

sufficient ports and speed 

Routing modes 
















switch 


74


MS compact 

MANAGEMENT AND IMAGE DISTRIBUTION FOR SMALL SYSTEMS 

Figure shows options 


• Compact system for operation in office environments 

• Supports conventional and automatic X-ray inspection 

units (integrated or StandAlone) 

• Image distribution based on the proven MatriX Server 

concept 

• Built-in image analysis station with expansion options 

for 5 workstations (3 analyst and 2 recheck stations) 

• Comprehensive HME package (user management, TIP, 

image management, statistics, backup, etc.) 

• Central image data archive (CIDA) 

Even smaller systems, both 

based on conventional (CXS) 

and automatic X-ray inspection 

units (EDtS, EDX-2is), 

require intelligent and reliable 

image distribution solutions. 

Numerous administration and 

management functions were 

developed to the same extend 

as required for large-scale 

installations. Beyond that, a 

constantly growing demand 

for central image storing has 

emerged in recent years. 

With the MS compact, Smiths 

Heimann offers a cost-effective, 

space-saving and extremely efficient 

solution which meets all 

requirements in one device. 

In addition to the two automatic 

units (EDX-2is und EDtS) three 

further analyst stations and 

two recheck stations can be 

connected to the MS compact 

to handle the high troughput of 

both atomatic units. All images 

are stored on the CIDA (Central 

Image Data Archive) and can 

be recalled any time, along 

with statistical data. Moreover, 

the MS compact supports the 

system management for further 

conventional X-ray inspection 

units. Of course, the MS 

compact supports all functions 

required for TIP of both product 

ranges. 


75

Technical Data MS compact 

General Specifications Housing 

Dimensions in mm 

Door front side 

Door rear side 

Cable access 

Transportation 

Front panel 

Colour 


Recommended power supply 

Weight 

Option 


General Specifications MS compact 

(as described or higher quality) 

Functionalities 

CPU 

Hard disk drive 

Storage capacity 

Graphics card 

Interfaces 

Optional equipment 

Scope of Delivery 

1) 

Extent corresponds to a Management Package Small (MPS). 

Modifications within the scope of technical progress reserved. 

560 x 800 x 590 mm (B x L x H) 

fold right, door lock, no front side glazing possible 

3 integrated ventilation units, 10 cm distance to the wall for exhaust air 

rear side incl. cable duct and mount 

front side: 2 rollers incl. brake; rear side: 2 castors 

on/off switch for workstation PC 

housing and door front side RAL 7016, microstructure matt 

max. +35°C 

110-230 VAC +10% / -15% (single-phase), 50-60 Hz ± 3 Hz (L, N, PE) 

fuse protection 10 A / outlet 

approx. 100 kg with full equipment 

version with wooden table top 

1 kVA 

image distribution with defined maximum number of clients (MatriX Server) 

Central Image Data Archive (CIDA) 

image analysis station (Analyst) 

complete management system HME 1) 

Intel Q9300, 2.5 GHz 

2 x 73 GB, 1 x 150 GB 

2 x 2 GB 

Dual Head graphics card, resolution 1280 x 1024 (digital); 

main display 2048 x 1536 (analog) 

additional display 1600 x 1200 (analog) 

2 x parallel, 1 x serial, USB, Ethernet 

1 x DVD RW 

Uninterruptible Power Supply - APC 750 VA 

integrated Ethernet Switch 

Germany 

Smiths Heimann GmbH 

Im Herzen 4 

65205 Wiesbaden 

T: +49 (0)611 9412-0 

F: +49 (0)611 9412-229 

mail.germany@smiths-heimann.com 

http://www.smiths-heimann.com 

France 

Smiths Heimann S.A.S. 

36, rue Charles Heller 

94400 Vitry sur Seine 

T: +33 (0)1 55 53 55 55 

F: +33 (0)1 46 80 34 99 

mail.france@smiths-heimann.com 

http://www.heimanncargovision.com 

UK 

Smiths Detection International UK 

Unit 3, Odhams Trading Estate 

Watford 

Herts WD24 7RY 

T: +44 (0) 1923 294400 

F: +44 (0) 1923 294401 

mail.uk@smiths-heimann.com 

USA 

Smiths Detection Inc. 

30 Hook Mountain Road 

Pine Brook, NJ 07058 

T: +1 973 830-2100 

F: +1 973 830-2200 

mail.usa@smiths-heimann.com 

Canada 

Smiths Detection Montréal Inc. 

3225 Francis-Hughes, Suite 100 

Canada H7L 5A5 

T: +1 (450) 967-0010 

F: +1 (450) 967-0015 

mail.canada@smiths-heimann.com 

Singapore 

Smiths Detection Asia Pacific Pte. Ltd. 

100 Beach Road 

#20-06 Shaw Towers 

Singapore 189702 

T: +65 6 466-1700 

F: +65 6 469-2506 

mail.singapore@smiths-heimann.com 

All network connections “TP cat5e“ 


76


Analyst Workstation 

INCENT.VIEW UWS FOR THE DISPLAY OF X-RAY IMAGES 


• Analyst workstation for use in multi-level X-ray inspection 

systems 

• Single or double monitor operation 

• Full image analysis functionality (SEN, HIGH, VARI, BW, 

O 2 , OS and many more) 

• Full TIP functionality 

• Use of mouse or keyboard 


At the Analyst Workstation, the 

images generated in a multilevel 

X-ray inspection system 

can be analyzed. Normally, the 

Analyst Workstation is installed 

in the second control level of 

a system. The workstation is 

used to evaluate the images 

which have been found suspect 

by the automatic X-ray inspection 

units. Due to the flexible 

configuration, this workstation 

can also be used in other 

applications, e.g. as a separate 

workstation for standard X-ray 

inspection systems. In cooperation 

with the MatriX Server, 

the modular concept allows 

the arbitrary extension of any 

multi-level system. 

An automatic archiving of the 

images displayed on the Analyst 

Workstation over configurable 

periods of time is possible with 

the optional CIDA. Depending 

on the X-ray inspection 

unit placed ahead, the Analyst 

Workstation can be operated 

as a single or double monitor 

workstation. It thus meets the 

highest demands in terms of 

ergonomics and image display 

quality, and, of course, all 

advanced image processing 

functions, the display of the remaining 

decision time and full 

TIP functionality are available. 

Besides the excellent X-ray 

image representation quality, 

all advanced features of the 

Analyst Station can be accessed 

with mouse and keyboard. 

77

Technical Data Analyst Workstation 

Image Evaluation 

Contrast (monitor) 


Electrical zoom 

Absorption 

Marking 

Options 

22 grey levels (test pattern available) - monochrome display) 

BW, NEG, HIGH, CAT; VARI-MAT, O2, OS, SUPER-ENHANCEMENT (options) 

Linear zoom 2-, 4-, 8-fold (up to 16-fold possible) 

Absorption degree is characterized by colour saturation and grey level 

Suspect areas are marked by frames (red frames - explosives, blue frames 

- high absorption degree) 

Insertion of date and time, operator ID, decision time 

Hardware Platform 1) 

Incent.view 

Monitor 

Keyboard 

Other 

Please see Technical Information „Incent.view“ (no. 95593506) for further 

information 

1 or 2 Flat screen monitors 

Smiths Heimann Operator Keyboard 

Mouse 

1) 

Subject to modifications 

We reserve the right to make modifications in line with technical progress. 

Desktop variant on request 

Example of a schematic diagram 




Analyst Workstation is a trademark of Smiths Detection Group Ltd. 

78


ReCheck 

RECHECK AND ANALYST STATIONS 

HEIMANN X-RAY INSPECTION SYSTEMS 

Introduction 

Suspicious baggage items 

strictly require an exact reinspection. 

ReCheck provides the 

facility to control those baggage 

items separately with the aid of 

the X-ray image. 

It is also possible to connect 

several X-ray inspection units 

with one or several ReCheck via 

network. 

Equipment 

ReCheck consists of a keyboard, 

a monitor and a computer 

unit where the operator 

disposes of the same operating 

functions as on the X-ray unit. 

Due to the digital image trans- 

mission in HIF (Heimann Image 

Format) from the X-ray inspection 

unit to the ReCheck station 

the same high image quality is 

guaranteed. 


• ReCheck facilitates the recheck of suspicious baggage 

items with the help of the X-ray image 

• ReCheck increases the throughput by seperate reinspections 

• ReCheck offers the same image quality and operating 

functionality as the X-ray inspection unit 

• Several X-ray inspection units can be combined with 

one or several ReChecks 

ReCheck: Monitor, keyboard and computer unit 


79

Increased throughput 

If the operator of the X-ray unit 

notices a suspicious baggage 

item, he can transfer its X-ray 

image to the ReCheck monitor 

by touch of a button. The corresponding 

baggage item is also 

routed to the ReCheck area. 

The ReCheck operator can now 

inspect the baggage item by 

means of the X-ray image while 

the screening operation can 

proceed regularly. 

Due to this separate baggage 

recheck and X-ray image evaluation 

a stopping of the conveyors 

can be avoided and thus, 

the throughput of the checkpoint 

is increased. 

ReCheck with optional lifting column 

ReCheck with optional monitor lifting column and recheck table integrated in the checkpoint 




ReCheck is a trademark of Smiths Detection Group Ltd. 

80


SAM 

System Activity Monitor 

MONITORING SYSTEMS FOR ALL X-RAY INSPECTION UNITS 


Introduction 

By the use of SAM System Activity 

Monitor it is possible to 

monitor the activities of every 

single operator on an X-ray 

inspection unit from a central 

point via network from any 

Management Workstation. 

Application 

With your Heimann Management 

Console (HMC) select an 

X-ray unit by means of SAM and 

establish a connection via the 

existing network. To do so, you 

have to observe that only one 

HMC can have access to a unit, 

so it is inaccessible for other 

HMCs. 

After you have established the 

connection, the monitor display 

of the X-ray unit appears on 

the second screen. This allows 

you to track all steps of the 

operator. The user interface is 

refreshed every second to give 


the supervisor permanent information 

about the evaluation 

process. 

As default image the HI-MAT PLUS 

color image is displayed. If the 

operator changes to another 

image representation as e.g. 

Organic Only or Organic Stripping, 

it is at present not possible 

to transfer this representation 

to the supervisor’s monitor. 

This, as well as an optimized 

display of the image will be implemented 

in the near future. 

If you want to observe another 

X-ray unit simply separate the 

existing connection and connect 

with another unit. 

• SAM facilitates monitoring the activity of single X-ray 

units in real time 

• SAM can easily be integrated into the existing network 

• SAM allows the user to track all actions of the X-ray 

unit‘s operator 




SAM is a trademark of Smiths Detection Group Ltd. 

81


HiTraX 

X-RAY TECHNOLOGY 


Technology for Operators 

The operator should be provided with 

an optimum technical support to 

facilitate accelerated security checks. 

However, only optimized interaction of 

X-ray technology and operator leads 

to high security standards. 

Besides the technical achievements, 

HiTraX focuses on the ergonomic 

configuration of the man-machine 

interface. 

HI-MAT Plus 

In the course of the HiTraX development, 

the HI-MAT Plus method has been 

dramatically improved. 

The resolution in the color gradation 

of the material representation 

has been increased. The represented 

materials are thus much finer distinguished 

in color. As a consequence, 

even small material differences 

become visible.The perceptibility of 

image details is raised. 

Since the sensitivity of the human eye 

varies with the wavelength (color) of 

light, the color representation has 

been adapted to the anatomy of the 

human eye. 

The result of HI-MAT Plus is an X-ray 

image of a transparency and detailed 

resolution which has not yet been surpassed 

in X-ray inspection systems. 

Realtime Image Processing 

Since evaluation time is one of the 

most critical parameters in real applications, 

the quick and definite access 

to all functions is the central requirement 

to be met by an ergonomic, state 

of the art X-ray inspection systems. 

Therefore, HiTraX provides realtime 

processing for all system functions. 

Even automatic operator supports 

as X-ACT or HI-SPOT are working in 

realtime mode. No further operator 

manipulation is required. 


• High-end processor technology 

• High-speed digital signal transmission 

• HI-MAT Plus advanced material classification 

• High image resolution up to 1280X1024 

• Flicker-free image (75 Hz non-interlaced) 

• 24 Bit realtime image processing 

• New ergonomic user-interface 

• Programmable priority keys 

• Network interface 

Advanced Options 

• SuperENhancement (SEN) 

• XPLORE: Z EFF 

sensitive image display 

• X-ACT: automatic online framing of suspicious material 

• IMS: image management system 

• HI-TIP: Threat-Image-Projection (meets FAA specification) 

• HI-SPOT: online local area image enhancement 

• Remote Diagnostics 

• OTS: Operator Training System 




HiTraX is a trademark of Smiths Detection Group Ltd. 

83


HiTraX 

IMAGE ENHANCEMENT FUNCTIONS 


LOW 

The contrast of brighter image sections, 

i. e. materials which are easy to penetrate, 

is increased and at the same 

time high absorbing objects are displayed 

in black. An image of virtually 

lower penetration 

HIGH 

This function facilitates the identification 

of objects obscured by highly 

absorbing objects. The contrast of 

darker image parts, i. e. objects which 

are more difficult to penetrate, is 

HI-MAT Plus image - NEG 

HI-MAT Plus image - LOW 

HI-MAT Plus image - HIGH 

increased and at the 

same time low absorbing objects are 

filtered out, and an image with apparently 

higher penetration is created. 

B/W image - BW + NEG 

B/W image - B/W + LOW 

is created. Details of low-absorbing 

items become more clearly visible. 

Low is available for B/W and 

HI-MAT Plus image display mode. 

B/W image - BW + HIGH 

Even thicker layers of light 

organic material (explosives, drugs) 

are significantly emphasized. 

HIGH is available for B/W and 


NEGATIVE (NEG) 

By operating this function a negative 

image is received. Highly absorbing 

objects appear bright, low 

absorbing objects appear dark. 

Thereby smaller and slimmer objects 

of higher density (e. g. wires) become 

visible even more clearly. 

Low is available for B/W and 



85

Material Sensitive Filtering 

By means of the HI-MAT Plus method 

conclusions concerning material origins 

can be made. 

The functions Organic Only (O 2 ) and 

Organic Stripping (OS) facilitate suppression 

of whole material groups 

according to the material assignment 

method. Therefore, O 2 and OS enable 

the selective inspection of objects by 

HI-MAT Plus image - OS 

representing certain material groups 

as gray values only. 

This “stripping” of organic or nonorganic 

material is especially advantageous 

when structures of objects 

appear which do not belong to the material 

group sought after, and partially 

overlap the substance searched for. 

Organic Only (O 2 ) 

With Organic Only the color display 

of organic objects, i. e. objects made 

of light material, is intensified. High 

absorbing or inorganic substances are 

filtered out and 

represented in gray values. 

For example, all parts of the image 

classified as metal are represented as 

gray values if O 2 is used. The remaining 

organic parts will then be much 

better visible due to representation in 

orange color. 

By this method fine contours of possibly 

hidden substances like explosives 

or drugs become visible 

Organic Stripping (OS) 

In contrast to Organic Only, Organic 

Stripping is restricted to displaying 

non-organic material only. Anything 

that cannot be classified as organic 

material will be colored (e.g. blue for 

steel, green for mixed material). Only 

inorganic substances become visible. 

This function aids the detection of 

technical gadgets and wires. 

Both functions can also be combined 

with the VARI function (VARI-O 2 / 

VARI-OS). 

It will thus be possible to have 

only materials of a certain absorption 

thickness and a certain material 

group represented on screen. 

Combining VARI with the stripping 

functions suppressing of disturbing 

homogeneous background is pos- 

SEN can be combined 

with Organic Only and 

Organic Stripping 

Super-ENhancement (option) 

This unique function supports the 

operator in evaluating X-ray images 

of inspected objects faster and more 

effectively than any other conventional 

enhancement filter. 

An optimum contrast throughout 

Superenhancement (SEN) images in HI- 

MAT Plus and b/w display mode 

the image is achieved, independent of 

the prevailing image brightness. 

By means of electronic realtime image 

processing, the contrast enhancement 

is calculated automatically for 

every single image section. 

In contrast to conventional filter algorithms 

not only low absorbing objects 

within bright image sections but also 

objects within dark image sections 

(obscured by stronger absorbing 

objects) are made visible simultaneously. 

As a result an X-ray image with highest 

detailed resolution is obtained. 

Recognition of single objects like 

plastic weapons, explosives and drugs 

is significantly improved. Due to high 

penetration and resolution low density 

objects can be clearly identified even if 

they are covered by metal sheets. 

HI-MAT Plus image - O 2 




HiTraX is a trademark of Smiths Detection Group Ltd. 

86


X-ACT 

ADVANCED CONTENTS TRACKING 


Introduction 

X-ACT offers an automated procedure 

for the recognition of particular substances. 

Suspicious or high absorbing 

materials are framed according to 

their material origin. 

X-ACT can be used for selective 

targeting and detection of narcotics, 

explosives or other prior defined substances. 

The X-ACT system supports 

the difficult and responsible job of operators 

by accelerating the checking 

procedure due to the automatic and 

direct access to suspicious materials 

in the baggage. 

X-ACT Principle 

The X-ACT system is based on the 

proven HI-MAT Plus multi energy material 

discrimination technique, sophisticated 

image processing software and 

dedicated hardware. 

The HI-MAT Plus material detection system 

has been further improved using 

Would you expect explosives in this baggage 

? 

X-ACT automatically marks suspect 

items 

a highly stabilized X-ray source and 

selected components for detection. 

The detection system provides the 

required material resolution to distinguish 

between explosives, narcotics 

and other materials. 

The automatic detection software 

which is run on a state-of-the-art 

computer hardware is a spin-off derived 

from the explosive detection system, 

EDS, for hold baggage screening. 

The main feature is to separate the 

materials of interest from other bag 

contents. Even if suspect items are 

obscured or overlapped by others, 

they can be separated and alerted. 

Besides framing, the operator can be 

alerted through acoustic signals or 

stopping of the belt. 


• X-ACT offers an automated procedure for the recognition 

of suspicious material 

• X-ACT works online and in realtime without loss of 

evaluation time for the operator 

• X-ACT is ‘background-sensitive’: detection of substances 

covered by other material 

• X-ACT does not require further operator manipulation 

or stopping of baggage flow 

• X-ACT provides automated conveyor stops without 

loss of information 

• X-ACT implies an image storage function (IMS) 

• X-ACT includes an automatic recalibration facility 

which guarantees long term stability 


87

Operation 

Suspicious material that in the past 

has been difficult to recognize by the 

operator of standard baggage inspection 

units are automatically marked, 

i.e. without any further operator 

manipulation. 

Blue frame: high density (option) 

X-ACT operates without interrupting 

other evaluation procedures (e.g. no 

stopping of conveyor belt necessary). 

X-ACT marks the substances in the 

HI-SCAN images. This means operators, 

using our standard systems, are 

familiar with the images and have an 

additional indication concerning the a. 

m. objects located in the bag. All other 

standard image evaluation functions 

are still available. 

X-ACT works simultaneously to all 

other available online-functions as HI- 

TIP or HI-SPOT. 

The frames are color-coded: 

Red frame: explosives 

A blue frame is inserted where the 

material to be checked is very dense 

and the system can no longer discriminate 

due to the high X-ray absorption. 

Compatibility 

X-ACT is compatible with the HI- 

SCAN units manufactured by Smiths 

Heimann. 

The younger generation of X-ray inspection 

units of Smiths Heimann for 

hand baggage check can be retrofitted 

with X-ACT. 

(Details provided on request with indication 

of serial number). 

Customizing 

Depending on the requirements special 

explosives and/or narcotics can be 

trained into the system on request. 

Green frame: narcotics (option) 

Setup 

Due to the complexity of the detection 

data base the X-ACT system is pre-set 

according to the customer‘s requirements 

by the supplier. 

88 




X-ACT is a trademark of Smiths Detection Group Ltd.


HI-TIP Plus 

THREAT IMAGE PROJECTION 


Introduction 

By means of HI-TIP, complete X‐ray 

images of fictional baggage items 

containing threat objects are automatically 

projected between the images of 

real baggage items as well as single 

threat objects of different kind are 

automatically projected into real X‐ray 

images of scanned baggage. 

The operator of the X‐ray system does 

not notice the projection process . 

During this procedure the full range 

of image enhancement functions to 

support the evaluation process is still 

available. Even automated operator 

support functions can be used in combination 

with HI-TIP. 

The task of the operator is to detect 

and mark dangerous or suspect objects. 

u 

u 

Bag marked by the operator 

Operation 

If a suspect object has been detected 

and marked by the operator, 

the conveyor is stopped automatically. 

The fictional threat object is 

now displayed with a black/yellow 

frame. 

The fictional disappears from 

the screen for further evaluation 

of the real baggage. 

System Configuration 

The HI‐TIP system provides a librarydivided 

into categories and 

subcategories containing combined 

complete threat images and images of 

individual threat objects. The supervisor 

can add, edit and delete categories. 

Moreover, user with supervisor access 

level can specify: 

From which categories and at which 

percentage in proportion to the other 

categories combined threat images 

and single threat objects are projected 

during the normal operational flow. 

uWhich images from a category are to 

be projected. 

Missed Objects 

If the operator has missed an object 

projected on the image, the conveyor 

will be stopped and a message 

will be displayed on the screen. The 

real X‐ray images together with the 

missed threat objects are automatically 

stored. 

The images can be recalled using 

the IMS (Image Store System). 


89

System Configuration 

The HI-TIP system provides a librarydivided 

into categories and 

subcategories containing combined 

complete threat images and images of 

individual threat objects. The supervisor 

can add, edit and delete categories. 

Moreover, user with supervisor 

access level can specify: 

From which categories and at 

which percentage in proportion 

to the other categories combined 

threat images and single threat 

objects are projected during the 

normal operational flow. 

Which images from a category are 

to be projected. 

Which decision times are provided 

for the operator to detect a threat 

image. 

How many projections are made 

randomly rather than within the 

diversification range. 

Which additional decision times 

the operator is given to detect a 

threat object if he has stopped the 

conveyor. 

The number of projections compared 

with the number of real 

bags. 

The diversification of projections 

around the number of real bags. 

Reporting System 

From reports assigned to the individual 

users, higher level users can read 

how many times projected objects and 

images have been detected and how 

many of 

them have been missed. 

Conclusions as to the efficiency of the 

security checks with regard to different 

users and different workload can 

be drawn. 

HI-TIP Plus 

configuration 

menues 

HI‐TIP Plus 

report files 

90 



Modifications reserved. 95584775 20/01/2011 © Smiths Detection Group Ltd. ‐ In some cases, the figures contain options 

HI‐TIP is a trademark of Smiths Detection Group Ltd.

FS-L1903C 

LCD COLOR MONITOR 

AUTO - SCANNING WITH DIGITAL CONTROL 

High-end 19 inch professional LCD Monitor for Smiths Detection HI-SCAN X-Ray 

Inspection systems with outstanding features and benefits for best picture quality and 

ghosting. 

Benefits: 

 

 

 

 

 

Optimized for reduced motion blur for moving images 

Moving Image quality close to CRT technology 

New Technology for reduced ghosting 

Customized Panel for improving luminance 

Customized Monitor Timings for X-Ray Systems 


91

Specifications 

Model 

FS-L1903C 

Size 

19” Diagonal 

Aspect Ratio 5:4 

LCD PANEL 

Optimum Resolution 

Supported Resolutions 

Refresh Rate 

Horizontal Frequency 

Vertical Frequency 

Surface Treatment 

Response Time 

Pixel pitch 

Display colors 

1280 x 1024 native @75Hz 

Customized up to 1920 x 1200 (WUXGA) 

60Hz ~ 75Hz 

30kHz ~ 92kHz 

48Hz ~ 85Hz 

Hard-Coating(3H), Anti Glare 

Typical 5ms 

0.63(H)mmX0.63(V)mm 

16.7M (RGB 8-bit data) 

Contrast Ratio(Typ.) 800:1 

Viewing Angle(Typ.) 

R/L 170, U/D 160 degree 

Luminance(Typ.) 300 cd/m 2 

Power Consumption 

Typical 

Standby Mode 

35 Watt 

Under 1 Watt 

Control Keys 

Connectors 

Power 

Approval Marks 

Dimension Size 

Monitor Weight 

VESA Mounting 

Ambient Temperature 

(Operating) 

Ambient Humidity (Operating) 

Cooling 

Input, Minus, Plus, Down, Up, Auto, Menu, Power 

Digital: 1 x DVI-D, Analog: 1 x D-sub 15 pin, Service: 1 x RS-232 

AC 100-230V(50-60Hz) 1.5A Max 

FCC,CE,ROHS,WEEE 

426.5 x 357.0 x 73.5 (mm) 

6.36 kg 

100 x 100 mm 

0⁰ to 40⁰C 

5-85%, non-condensing 

Fanless cooling – low noise 

Modifications reserved 95593860 14/05/2012 © Smiths Heimann 

92


iLane.pro 

INTEGRATED CHECKPOINT SOLUTION 


• Increased security and faster passenger 

handling 

• Checkpoint designs to facilitate 

enhanced operations such as 

- Remote Screening 

- Image Distribution 

- Directed Search / Recheck 

• Innovative modular design allows 

system to be adapted to available 

space 

• Extremely low-noise and safe 

operation 

• Automatic bag spacing (variable 100 

- 500 mm) 

• Automatic bag reject diverter 

• Motorized conveyor option with 

variable speed 

iLane.pro – the new innovative checkpoint 

solution from Smiths Detection is the next 

generation of the worldwide proven Proline 

checkpoint. 

With iLane.pro’s modular design customers 

are provided with an opportunity to create 

their own individual checkpoint and with a 

wide range of components in a new, modern 

design, iLane.pro facilitates the best use of 

space and would replace and enhance any 

existing checkpoint area. 

Through a combination of iLane.pro checkpoint 

design and enhanced operations and 

functionality, such as, tray return, directed 

search and remote screening customers are 

able to handle challenges such as increasing 

passenger throughput and performance at 

the security checkpoint. 

iLane has been designed for the integration 

of X-ray units HS 6040i, HS 6046si, 

HS 6040aTiX as well as all the HS 7555 models 

and the new HS 6040-2is. 

iLane.pro is the perfect choice as part of your 

security checkpoint of the future. 


93

Technical Data iLane.pro 


Conveyor height/width 




Practical throughput 1) 

for 7555aTiX, 7555i and 7555si = 750 mm / 830 mm 

for 6040i and 6046si 

= 700 mm / 690 mm 

for 6040aTiX and 6040-2is = 800 mm / 690 mm 

0.17 - 0.44 m/sec (motorized section) 

max. L = 600 mm, W = 400 mm, H = according to X-ray tunnel 

approx. 30 kg/m plastic rollers, 60 kg/m steel rollers 

550 bags/h 

Installation data 

Operating/storage temperature 

Humidity 

Power supply (for auto divert) 

Internal power supply 

Conveyor length 2) 


0° - 40°C (32° - 104°F) 

10% - 90% non-condensing 

mains voltage 230 V + 10-15%; frequency 50 Hz, 

stability ± 3%, 1-phase 



24 V 

100 mm - 4000 mm 

IP 54 


Standby 

Operation without trays 

Operation with rubber-coated trays 

< 55dB(A) 

< 58dB(A) 

< 62dB(A) 

Operating conditions 

Features 

Options 

All baggage items must be transported in trays. 

Automatic baggage spacing variable from 100 to 500 mm distance between the transport trays. Motorised conveyors 

with variable conveyor speed in the respective zones, baggage diversion without manual intervention, gravity 

fed tray retrun, operator consoles, recheck. 

Recheck station for X-ray unit, RFID tray identification, Remote Operator Screening, variable lengths, straight 

feed-in, search tables, roller conveyors 

1) 

depending on safety procedures and passenger behaviour 

2) 

variable according to options 




iLane.pro is a trademark of Smiths Detection Group Ltd. 

94


iLane.evo 

INTEGRATED CHECKPOINT SOLUTION 

Feature highlights 

• Throughput increased by up to 30% compared to conventional 

checkpoints 

• Highly efficient operator assignment 

• Low physical stress for passengers and staff 

• Increased security and faster passenger handling 

• Modular design allows system to be adapted to available 

space 

• Extremely low-noise and safe operation 

• Open interfaces for technologies as 

- remote screening 

- automatic and random diversion 

- provisions for special inspection procedures 

(staff, rechecks) 

- baggage collection point 

- intelligent video technologies 

iLane.evo presents the most 

technically advanced variant 

of Smiths Detection modular 

checkpoint conveyor systems. 

Its basic features are the fully 

automated tray transport, baggage 

separation and motorised 

diversion. iLane.evo has been 

designed for the integration of 

X-ray units HS 6040i, HS 6046si 

and HS 6040aTiX. 

iLane is a further development 

of the conventional ProLine 

series and offers convenience 

and considerable ergonomic 

advantages both for the operating 

staff and the passenger. 

Thanks to its design and intelligent 

automation, the system 

adds increased passive security 

to hand baggage checkpoints. 

Sustainability is guaranteed 

by the provision for optional 

additions such as the baggage 

collection point, remote evaluation 

concepts and interfaces to 

other technologies. 

iLane.evo has already been 

proved to offer the highest passenger 

throughput as well as 

highest reliability and safety in 

different variants. 

Key concepts such as parallel 

passenger lines at the entrance 

and exit area as well as 

extensive automation have set 

standards in safety, ergonomics 

and economics at hand baggage 

checkpoints. 


95

Technical Data iLane.evo 

General specifications 

Conveyor height input area 

Conveyor height diversion area 

Conveyor height collection area 

Conveyor speed 1) 



Theoretical throughput 2) 

Practical throughput 3) 

Installation data 

Operating/storage temperature 

Humidity 

Power supply 



Length 4) 

Width 4) 

iLane total weight 5) 



Standby 

Operation without trays 

Operation with rubber-coated trays 

Operating conditions 

approx. 950 mm 



0.2 m/sec. 

max. L = 600 mm, W = 400 mm 

35 kg/zone 

900 bags/h 

550 bags/h 

5 - 40°C 

10% - 95% non-condensing 





24 V 

max. 1080 watt 

12820 - 21000 mm 

2350 mm 

1285 kg (excl. aTiX = approx. 1600 kg) 

IP54 

< 55 dB(A) 

< 58 dB(A) 

< 62 dB(A) 

All baggage items must be transported in trays. 

Features 

Options 

Automatic baggage separation, variable from 100 to 500 mm distance 

between the transport trays, fully automated tray transport from the input 

area through the X-ray unit to the automatic tray return, surveillance of the 

complete conveyor line with photocells, intelligent zero line pressure conveying, 

variable conveyor speed in the respective zones, baggage diversion 

without manual intervention, automatic tray alignment, collecting tray for 

small items 

Recheck station for X-ray unit, RFID tray identification, Remote Screening, 

variable lengths, straight or curved feed-in. 

1) 

can be variably adjusted in zones 

2) 

bag length 600 mm, distance 200 mm 

3) 

depending on safety procedures and passenger behaviour 

4) 

variable according to options 

5) 

iLane.evo standard; length ~13 m incl. aTiX 




iLane.evo is a trademark of Smiths Detection Group Ltd. 

96


eqo 

PEOPLE SCREENING TECHNOLOGY 


• Automatic detection of concealed 

threats and contraband 

• Multi-material detection reveals 

any concealed objects such 

as metals, ceramics, plastics, 

liquids, narcotics, etc. 

• Minimal footprint allows for 

easy integration into existing 

checkpoints 

• Instant output of detection results 

• Simple scanning procedure 

supports rapid processing of 

people through the checkpoint 

eqo is an innovative solution to people 

screening. Using its unique flat-panel 

millimetre-wave technology this system 

offers state of the art detection capability 

within a minimal footprint. 

The scanning system provides a rapid 

means of detecting concealed objects 

using its real-time automated detection 

interface. 

Instant presentation of the scan result 

ensures rapid processing and high 

throughput. Separation of the scanning 

and alarm resolution further increases 

the throughput potential. 

This ‘next-generation’ approach marks 

the evolution of millimetre-wave people 

screening from mechanically scanned to 

electronically steered technology, which 

offers a reliable and easily serviceable 

system. 

The combination of the small footprint 

and options for right/left panel orientation 

mean that eqo can be easily integrated 

into existing checkpoint configurations. 

eqo is EU-ECAC Standard 2 approved - 

already meeting the requirements for 

aviation installations from 2019 and 

beyond. 

EU ECAC Standard 2 Approved 


97

Technical Data eqo 

Detection System 

Description 

Using active millimetre-wave technology, the flat panel reflect array directs mm-wave energy to and from a person 

to detect concealed objects. 

Acting as an electronically configurable lens, the panel scans a large cubic volume. This ensures that the person 

being scanned always remains in focus. The open plan design offers a positive user experience and facilitates ease 

of communication between the operator and person being screened. 

The operator interface provides instant feedback indicating the location of concealed objects. The output format 

prompts a directed search for fast alarm resolution. 

Automated checking of the operational process is integrated into the system thus ensuring that the correct 

screening procedures are implemented. 

System Information 

Scan volume 

Detection capability 

Response time 

Operating modes 

Features 

Interface control 

Access 

Operational Features 

Operational data reporting 

eqo scans a large three dimensional volume that ensures full coverage of the person being screened. 

Objects that the system can detect include but are not limited to: ceramics, metals, liquids, explosives, leather, 

plastics, paper, narcotics, etc. 

Instantaneous presentation of the detection result 

• Automated detection for high throughput and high performance detection 

• Operator image review for applications where non-standard detection is required 

Responsive touchscreen interface for easy and intuitive operator control with 

minimal training requirements. 

Different levels of password protected access for operator, supervisors, 

maintenance technicians, system administrators, etc. 

Combined search/scan for optimum throughput, random alarm generation 

to include additional screening procedures, audio signal alert. 

Throughput, scan count, user access, and other operational parameters are 

automatically recorded by the system 


Power supply 



Dimensions system 

Weight 



Humidity (non-condensing) 

Altitude 

230 VAC / 120 VAC 

1.3 KW (nominal) 

< 55 dBA 

2415 (L) x 1080 (W) x 2110 (H) [mm] • 95.1” (L) x 42.5” (W) x 83.1” (H) 

3 km 

Clearly illustrated location of anomaly 

objects on the user interface 

2415mm 

95.1“ 

2110mm 

83.1“ 

1080mm 

42.5“ 

750mm 

29.5“ 

300mm 

11.8“ 

130mm 

5.1“ 

200mm 

7.9“ 

2050mm 

80.7“ 


Modifications reserved 95592232 11/12/13 © Smiths Heimann - In some cases, the figures contain options. 

eqo is a trademark of Smiths Detection Group Ltd. 

98


B-SCAN 

16HR-DV 

TRANSMISSION X-RAY PEOPLE SCREENING TECHNOLOGY 


• Detects objects concealed internally 

in or externally on the body. 

• Contraband and threat detection 

including: weapons, explosives 

(plastic and powder), detonators, 

narcotics, electronic devices, diamonds, 

precious stones/metals and 

mobile phones. 

• High throughput – scan time less 

than 7 seconds. 

• Dual view – full body and additional 

high resolution torso scan at the 

same time 

• Complete head to toe inspection in 

one short inspection cycle. 

• State of the art image processing 

software and zoom functions facilitates 

efficient image evaluation 

• Low dose rate

Technical Data B-SCAN 16HR-DV 

Function 

Material detected includes 


Type of scan 

Primary function 

Wire detectability 

Technology 

Operational Data 

Physical format 

Start up time 

Belt speed 

Scan method 

Scan time 

Alarm resolution 

Image one 

Image two 

Conveyor load capacity 

Installation information 

Dimensions 

Weight 

Humidity 






Power supply (standard) 

Image generation 

Generator cooling 

Scan format 

Generator 


Dose per inspection 

Duty cycle 


Result presentation 


Image display 


Monitor 

Options / Features 

Metal, ceramic, plastics, powders, explosives, narcotics 

Objects hidden internally and externally on the body 

Full body scan in one inspection pass 

Screen people for contraband and threats 


Low dose transmission x-ray 

Open tunnel - In line with checkpoint flow 

220kg (485 lb) 

approx. 2585 [L] x 2525 [H] x 2350 [W][mm] (101.8” x 99.4” x 92.5”) 

990kg 

10% - 90% (non condensing) 

-20°C to 60°C 

0°C to 40°C 

< 1.0 kVA 

Metal body (aluminium, steel) 

< 70 dB (A) 

230 VAC / 120VAC +10% / -15% 50 Hz / 60 Hz 

Oil cooled, closed circuit 

Fan beam line scan 

160kV cp, Hermetically sealed oil bath. 

High resolution semiconductor detector lines 

< 4.5 µSv (


B-SCAN 

16HR-FB 

















efficient image evaluation 

• Low dose rate

Technical Data B-SCAN 16HR-FB 

Function 



Type of scan 



Technology 



Start up time 

Belt speed 

Scan method 

Scan time 




Dimensions 

Weight 

Humidity 









Scan format 

Generator 



Duty cycle 




Image display 


Monitor 








220kg (485 lb) 


820kg 


-20°C to 60°C 

0°C to 40°C 

< 0.9 kVA 


< 70 dB (A) 

230 VAC / 120VAC +10% / -15% 50 Hz / 60 Hz 





< 2.0 µSv (


B-SCAN 16HR-LD 100 

















efficient image evaluation. 

• Very low dose rate

Technical Data B-SCAN 16HR-LD 100 

Function 



Type of scan 



Technology 



Start up time 

Belt speed 

Scan method 

Scan time 




Dimensions 

Weight 

Humidity 









Scan format 

Generator 



Duty cycle 




Image display 


Monitor 

Options / Features 








220kg (485 lb) 


880kg 


-20°C to 60°C 

0°C to 40°C 

< 0.9 kVA 


< 70 dB (A) 

230 VAC / 120VAC +10% / -15% 50 Hz / 60 Hz 





< 0.1 µSv (


B-SCAN 16HR-LD 250 

















efficient image evaluation. 

• Very low dose rate

Technical Data B-SCAN 16HR-LD 250 

Function 



Type of scan 



Technology 



Start up time 

Belt speed 

Scan method 

Scan time 




Dimensions 

Weight 

Humidity 









Scan format 

Generator 



Duty cycle 




Image display 


Monitor 








220kg (485 lb) 


880kg 


-20°C to 60°C 

0°C to 40°C 

< 0.9 kVA 


< 70 dB (A) 

230 VAC / 120VAC +10% / -15% 50 Hz / 60 Hz 





< 0.25 µSv (


SABRE 5000 

HANDHELD TRACE DETECTOR FOR EXPLOSIVES, CHEMICAL 

AGENTS AND TOXIC INDUSTRIAL CHEMICALS OR NARCOTICS 


• Smallest, lightest tri-mode 

(Explosives, Narcotics, CWA/TICs) 

detector available 

• Optimized detection of peroxides 

(used in home-made explosive 

devices and Improvised 

Explosives Devices) in vapor mode 

• Continuous automatic vapor 

sampling in both positive and 

negative modes for CWA/TIC 

detection 

• Self-diagnostics with maintenance 

alerts and onboard troubleshooting 

• Faster clear down with 

truncated alarm 

The SABRE 5000 is the smallest, lightest 

tri-mode handheld system available for 

detecting trace amounts of explosives, 

chemical warfare agents, toxic industrial 

chemicals or narcotics. With its ability 

to detect a wide range of threats, it is 

a cost effective instrument for security 

professionals and military agencies that 

require portability and flexibility to perform 

their duties. 

Using Smiths Detection’s proven Ion 

Mobility Spectrometry (IMS) technology 

the SABRE 5000 is programmed to detect 

and identify over 40 threat substances in 

approximately 20 seconds. Threats such 

as common peroxide-based, volatile and 

unstable chemicals often used to construct 

Improvised Explosive Devices (IED), and 

ammonium nitrate commonly used in 

home-made explosives. 

Additional features include automatic 

self-calibration with no calibration consumables 

or related procedures required to save time 

and money, onboard diagnostics for simple 

troubleshooting assistance, a truncated alarm 

feature for faster clear down, and an onboard 

library that is user-expandable to program new 

substances as new threats emerge. 

With a start time of 15 minutes and weighing 

approximately 7lbs. (including the four hour 

battery), the SABRE 5000 is a small, powerful 

ally in the war on terror and drug trafficking. 

Ion Mobility Spectrometry (IMS) Technology 

The SABRE 5000 uses Smiths Detection’s 

IMS technology—known for its sensitivity 

and reliability for both the detection and 

identification of an extensive library of 

military and commercial explosives and 

Continued overleaf 


107

SABRE 5000 

narcotics. This technology has been proven 

at military bases, border crossings, airports 

and other critical security checkpoints 

around the world. 

Particle and Vapor Trace Detection 

The versatile SABRE 5000 is capable of 

analyzing either trace particle or vapor 

samples, expanding the range of threats the 

system can detect. The operator can select 

the best analysis method for the suspected 

threat to yield the most accurate analysis 

results. Switching between sampling modes 

takes only seconds. 

Auto-Switching Vapor (ASV) Modes 

The ASV-Explosives mode offers an optimized 

detection in both negative and positive 

mode for an increased range of explosives 

detection from single sample. To detect CWA/ 

TIC substances, the ASV-CWA/TIC mode 

offers Emergency Responders flexibility to 

continuously sample vapor without the need 

for switching between positive and negative 

modes. When the system is used in a fixed 

location the display screen can easily be 

rotated 180° for easy viewing. 

Automatic Self-calibration 

The SABRE 5000 monitors its environment, 

senses changes that would affect its 

accuracy and re-calibrates accordingly. 

There are no calibration consumables 

or related maintenance procedures for 

calibration, saving time and money. 

Onboard Diagnostics 

The SABRE 5000 features onboard 

diagnostics to assist the operator with 

maintenance procedures and simple system 

troubleshooting for error resolution. 

USB Port 

The USB port allows for convenient 

downloading of alarm data for further 

detailed analysis, programming the 

instrument or printing alarm results with 

the included Instrument Manager Software. 

NRC Exemption 

No periodic radiation leak tests are 

required in the United States. Operators 

outside the United States should check 

with their radiation safety agency for local 

requirements. 

Technical Data 


Technology 

Ion Mobility Spectrometry (IMS) 

Radiation source 

63 

Ni, sealed 15 mCi 

Sample collection 

Trace particle and vapor 


Explosives, Narcotics, Chemical warfare agents/Toxic industrial chemicals 

Explosives detected 

RDX, PETN, TNT, Semtex, TATP, NG, Ammonium Nitrate, H 2 

O 2 

and others 

Drugs detected 

Cocaine, Heroin, THC, Methamphetamine and others 

Chemical warfare agents detected Nerve and blister agents such as Tabun, Sarin, Soman, Cyclosarin, Agent VX and Vx 

Toxic industrial chemicals detected Hydrogen Cyanide (HCN), Phosgene, SO, NH and others 

Sensitivity 

Particle: low nanogram range; Vapor: low parts per million range 

False alarm rate Less than 1% 

Input voltage 

12VDC, 110 VAC / 220 VAC, 50-60 Hz 

Alarm type 

Audio and visual, with substance identification 

Display 

8.89cm (3.5in) TFT color display 

Language 

English, French, German and Spanish 

Ready time 

Under 15 minutes 

Analysis time 

Detection in 10 seconds, complete analysis in 20 seconds 

Battery operating time 

4 hours 

Weight 

3.2kg (7lbs.) with the 4 hour battery 

Size 

36,3 x 11 x 13cm (14.5 x 4 x 4.5in) 

Operating temperature range 0° to +40°C (32° to 104°F) 

Operating humidity 

0 to 95% non-condensing 

Options 

Protective cover with shoulder strap 

2 hour battery 

108 


Smiths Detection, Canada 7030 Century Avenue, Mississauga, ON Canada L5N 2V 

Modifications reserved. 95593337 11/12/13 © Smiths Detection Group 

SABRE is a trademark of Smiths Detection Group Ltd.


IONSCAN 

500DT 

SIMULTANEOUS EXPLOSIVES AND NARCOTICS 

TRACE DETECTOR 


• Simultaneous detection of 

explosives and narcotics 

• Over 40 substances detected 

and identified in 5-8 seconds 

• Large touch-screen color display 

• Built-in printer 

• Internal data storage 

The IONSCAN 500DT fills the growing need 

of security professionals to have the ability to 

detect a wide range of substances and to be 

able to adapt as threats and their needs change. 

By incorporating two IMS detectors in a 

single unit, the IONSCAN 500DT is capable 

of detecting and identifying explosives and 

narcotics during a single analysis, giving you the 

ability to detect a broader range of substances 

while maintaining the high sensitivity and 

specificity you expect from Smiths Detection. 

This dual detector system is ideal for any 

security application. Aviation security 

personnel and the military will benefit from 

the capability to detect a much broader range 

of explosive substances. Customs, coast 

guard and border crossing agencies that 

require the ability to detect both narcotics 

and explosives from a single sample will 

be able to execute their duties utilizing one 

instrument. Facility security professionals 

will be aided in better protecting access 

points to commercial buildings, courthouses 

and correctional facilities, with the ability to 

detect multiple threats with one instrument. 

Evolution of the IONSCAN 

Building on the success and trusted technology 

of the IONSCAN family of trace detectors, the 

IONSCAN 500DT has an ergonomic design and 

a large, color touch‐screen display, built‐in 

printer and 40GB internal hard drive. Further 

advancements include full PC functionality, 

increased memory and networking capabilities. 

The IMS detectors in the IONSCAN 500DT are 

the same as in the IONSCAN 400B, of which 

over 6000 are in use by aviation security, 

government and law enforcement agencies, the 

military and by private security companies. 



109

IONSCAN 500DT 

Sample Collection System 

An advanced sampling wand eliminates the 

need for the operator to handle the sample 

swab after every sample. This increases the 

quality of the sample collected and analyzed, 

further enhancing the performance of the 

IONSCAN 500DT. 

Simplified Maintenance 

The IONSCAN 500DT includes a regenerative 

Air Purification System (APS), which reduces 

maintenance and cost of ownership. In 

addition, most operator replaceable parts do 

not require the use of tools in the field. 

Software 

The IONSCAN 500DT utilizes specially 

developed proprietary software. The 

operator navigates through the software 

using the large, color touch‐screen display. 

The large size and color‐coded interface of 

the display makes it easy to view results and 

operate the IONSCAN 500DT. 

With the increased internal memory, more 

analysis results can be stored. These results 

can be printed with the built‐in printer and 

exported via the USB port. The software also 

allows advanced operators the capacity to 

further review and analyze results. 



Technology 

Dual Ion Mobility Spectrometry (IMS) 


Explosives/Narcotics simultaneous, Explosives only, Narcotics only 


RDX, PETN, NG, TNT, HMX, TATP and others 

Narcotics detected 

Cocaine, Heroin, Amphetamine, Methamphetamine, MDA, THC and others 

Sensitivity 

Explosives: picogram range 

Narcotics: sub‐nanogram range 

Analysis time 

5‐8 seconds 

Warm‐up time 

30 minutes 

Input voltage 

95‐265 VAC, 50‐60 Hz 

600 W cold, 300 W warm 

Power 110/220V 

Weight 

19 kg (43 lbs.) 

Display 

26.42 cm (10.4”), color TFT touch‐screen display 

Dimensions 

40 cm x 31 cm x 40 cm (16” x 12.5” x 16”) with screen down 

40 cm x 57 cm x 40 cm (16” x 22.5” x 16”) with screen up 

Printer 

Built‐in, 4” impact 

Operating temperature range 0° to 40°C, (32° to 104°F) less than 95% humidity, non‐condensing 

Options 

Transportation case 


Smiths Detection, Canada 7030 Century Avenue, Mississauga, ON Canada L5N 2V8 

Modifications reserved. 95588905 11/12/13 © Smiths Detection 

IONSCAN is a trademark of Smiths Detection Group Ltd. 

110


MMTD 

MULTI MODE THREAT DETECTOR 


• Rugged handheld detector that 

identifies explosives, narcotics, 

TICs and CWAs in one system 

• Simultaneous detection and 

identification of explosives and 

narcotics from a single sample 

• Proprietary scan sequencing 

to detect conventional and 

home‐made explosives 

• Truncated alarm for faster 

clear down 

• Remote, unattended operation 

capability with Wi‐Fi/Ethernet 


The Multi Mode Threat Detector (MMTD) 

takes portable threat detection to a new 

level without compromising portability 

or functionality. Designed to IP54 rating 

for operation in extreme environmental 

conditions, the MMTD is a rugged, portable 

hand-held system for the rapid detection 

and identification of explosives, narcotics or 

CWA/TICs, featuring an optimized detection 

capability for peroxides, taggants and 

methamphetamine precursors. 

Four operating modes are available, including 

a dual mode setting for simultaneous 

detection of explosives and narcotics from one 

sample. Operators can also quickly switch 

between particle or vapor analysis methods 

to utilize the best method for detecting the 

suspected threat. 

Other features include up to five hours 

of uninterrupted operation with the two 

hot-swappable batteries (included); remote, 

unattended operation for one or more units 

with alarm and status information reported 

to Command & Control via Wi-Fi/Ethernet; 

unlimited data storage via SD card; and 

USB port for exporting results. The included 

software allows advanced operators to 

perform more in-depth data analyses and 

print results via network connection. 

The MMTD is for anyone who needs a 

handheld system to detect a broad range of 

threats. Its tough exterior design is ideal for 

the soldier on the front line and the security 

agent working in harsh elements (e.g. 

Border/Ports). Its wide range threat detection 

capability and portability makes it ideal for 

aviation, special event and border security. 

The MMTD is powered by Smiths Detection 

proven Ion Mobility Spectrometry (IMS) 


111

MMTD 

technology, trusted by the military, law 

enforcement and government agencies 

worldwide. 

Remote Capability 

The MMTD is capable of remote, unattended 

operation with alarm and status information 

reported via Wi-Fi or Ethernet. Supervisors 

can monitor status/alarms from multiple 

MMTD units simultaneously. 

Automatic Self Calibrating 

The MMTD monitors its environment, senses 

changes that would affect its accuracy 

and re-calibrates accordingly. There 

are no calibration consumables or daily 

maintenance procedures for calibration. 

Data Storage 

Because the MMTD uses a standard SD 

memory card, unlimited data storage is 

possible. Results can also be exported via 

USB, SD or Ethernet ports. The USB stick 

provides easy transfer from the SD card, 

as well as alarm data on-the-go 

for supervisors. 

Quick Switch Sampling Modes 

There is no down time when switching 

between vapor and particle sampling modes. 

A quick switch and the system is ready to 

begin analyzing. 

Advanced Windows CE Interface 

Currently available in English, Spanish, 

French and German. Advanced detector 

controller software offers convenient access 

to plasmagram display and analysis tools 

and diagnostics. 

Expandable Library 

The threat library is user expandable to 

program new threats. 

Rugged for Outdoor Operation 

The smart-safe battery has integrated LED 

display for immediate display of battery 

level. The toughened screen protects against 

accidental drops of tools or objects. The 

MMTD can withstand a 3’ (1 meter) drop to 

concrete, and has the ability to operate in 

sand, rain and wind conditions. 



Technology 

Ion Mobility Spectrometry (IMS) 

Radiation source 

63 Ni, sealed 15 mCi 


Trace Particle and Vapor 


Simultaneous explosives/narcotics, explosives only, narcotics only, 

Chemical warfare agents/toxic industrial chemicals 


RDX, PETN, TNT, TATP, NG, H 2 

0 2 

, EGDN and others 

Narcotics detected 

Cocaine, Heroin, Methamphetamine (including precursors), THC and others 

CWAs detected 

Nerve and blister agents such as Tabun, Sarin, Soman, Cyclosarin, 

Agent VX and V X 

TICs detected 

Hydrogen Cyanide (HCN), Phosgene, S0 2 , NH 3 and others 

Sensitivity 

Particle: low nanogram (ng) range. Vapor: low parts per million (ppm) range 

False alarm rate Less than 1% 

Programmable channels Over 40 

Input power 

90-264VAC, 1.6A, 47-63Hz 

Warm up time 

Less than 10 minutes 

Analysis time 

Less than 10 seconds 

Battery operating time 

5 hours (with two 2.5 hour hot-swap batteries included) 

Alarm type 

Audio and visual, with substance identification 

Display 

8.89cm (3.5in) color TFT LCD 

Data storage 

2 GB SD card included 

Dimensions (W x H x D) 

48,3 x 21,6 x 20,3cm (19” x 8.5x 8in) 

Weight 

5kg (11lbs), including 2.5 hour hot swap battery 

Operating temperature range -7°C to 55°C (20°F to 131°F) 


0 to 95% non-condensing 

Hardened specifications 

1 meter (3’) drop to concrete, ability to operate in sand, rain, wind conditions. (IP54 operating, IP53 sampling) 

112 


Smiths Detection, Canada 7030 Century Avenue, Mississauga, ON Canada L5N 2V8 


MMTD is a trademark of Smiths Detection Group Ltd.


RadSeeker 

HANDHELD RADIOISOTOPE IDENTIFIER 


• Advanced spectrum processing 

and identification algorithms for 

superior identification accuracy 

• Continuous automatic stabilization, 

no field calibration required 

• Fully ruggedized to survive 

3ft drop, extreme operating 

temperatures and water spray 

• Designed to meet/exceed all ANSI 

N42.34 (2006) requirements 

• Gamma only configuration also 

available 


The RadSeeker is a handheld, portable, 

rugged and highly accurate radioisotope 

detector and identifier. The RadSeeker was 

specifically designed to meet the Department 

of Homeland Security (DHS) mission 

requirements for a next-generation system 

capable of detecting and identifying nuclear 

threat materials. 

The RadSeeker offers superior identification 

capabilities that are based on Symetrica’s 

Discovery Technology . This technology 

couples advanced spectrum processing 

and identification algorithms with a choice 

of highly sensitive 1.5 x 1.5in Lanthanum 

Bromide (LaBr 3 

) or 2 x 2in Sodium Iodide (NaI) 

detectors resulting in superior accuracy which 

is unique and exclusive to Smiths Detection. 

This sophisticated detector system is capable 

of resolving complex masking scenarios and 

exceeds all ANSI N42.34 (2006) requirements 

for the identification of bare, shielded and 

multiple isotopes. 

The RadSeeker is easy to use while 

supplying the operator with quick, simple, 

specific information for threat assessment. 

Applications include Customs inspection, 

border protection, emergency response, and 

radiological facilities/personnel monitoring. 

RadSeeker and Cargo Inspection 

The RadSeeker can be used during a search 

or screening scenario in order to detect 

radioactive sources and then clearly identify 

whether the radioactive material uncovered 

is harmless naturally occurring radiation or 

a more dangerous source, such as special 

nuclear materials or those consistent with 

a “dirty bomb”. For each source identified 

the RadSeeker provides a risk assessment 

describing the source as innocent or a threat, 

removing all the guess work from the operator. 


113

RadSeeker 

RadSeeker and Emergency Response 

In an emergency situation, radiological 

response teams can quickly and accurately 

determine whether or not a source is 

present and the level of threat it represents. 

The built-in wireless capabilities which 

include both WiFi 802.11 and satellite 

phone interface provide those in a remote 

command center easy access to information 

such as the threat identified, source spectra 

and the location of the device/operator. 

In a situation that is deemed unsafe to send 

a responder down range the RadSeeker can 

be placed mechanically while monitoring and 

controlling the device from a safe distance. 



Radiation detection 

High sensitivity detection alarms/alerts indicate gamma or neutron radiation above background (CS/CL version 

only); user-adjustable thresholds. Performance exceeds ANSI N42.34 (2006) requirements 

Identification performance 

Exceeds all ANSI N42.34 (2006) requirements for bare, shielded, multiple and masked isotopes. Active background 

updates improve identification performance 

Library 

Easily extensible library with 41 radionuclide’s classified according to ANSI N42.34 (2006) (CS/CL version only) 

Stabilization 

Automatic energy stabilization (eliminates the need for field calibration) 

Energy range 

25 keV – 3MeV (Gamma) 

Alarm indications 

Audio, visual, earphone, vibrator, discrete ultra-bright LEDs for alarm indication on rear of system 

Battery 

Smart lithium ion battery (UL Approved); 8+ hours (normal operating conditions with 150+ IDs). Battery 

rechargeable in unit or desktop charger 

Environmental and safety 

Operating temperature range: -32°C (-25°F) after warm-up to 50°C (122°F); shock and vibration: ANSI 

N42.34 (2006); drop: 91.44cm (3ft) onto 5.1cm (2in) plywood covered concrete; safety: UL 61010-1; EMC: ANSI 

N42.34 (2006), humidity: 3-98% relative humidity, non-condensing at 35°C (95°F) 

Protection Fresh water resistant, splash proof, dust and sand proof, IP65 (ANSI/IEC 60529) 

Dimensions (WxLxH) 

17.8 x 30.5 x 11.4cm (7 x 12 x 4.5in) – small bumpers 

Weight 

CS 2.4kg (5.2lbs), CL 2.24kg (4.95lb), CS-G 2.27kg (5 lbs) 

Connectivity 

Wireless 802.11b/g/n, serial USB, ethernet and satellite phone connectivity available via RF modem 

Display 

High contrast, high resolution (428 x 272 pixels) color Organic Light Emitting Diode (OLED) 

Locator 

Global Positioning System (GPS) – provides the longitude and latitude of the system throughout the screening 

process and at time identification was made 

Accessories included 

Transportation case, sling with strap, additional battery pack, AC power adapter, 12v DC car adapter, desktop 

battery charger, USB cables, USB headphone adapter, SAT phone adaptor, set of large bumpers, screwdriver (for 

changing bumpers), manuals, PC software installation CD 

Configurations 

Radiation detection technologies 

Dose rate range 

Languages 

RadSeeker CS 

(Commercial Sodium Iodide) 

2” x 2” Sodium Iodide (gamma 

spectrometer) 

Moderated 3He (neutron detector) 

1urem/hr to 12mrem/hr (Cs-137) 

10 nSv/hr - 120 uSv/hr (Cs-137) 

English, French, German & Spanish 

RadSeeker CL 

(Commercial Lanthanum Bromide) 

1.5” x 1.5” Lanthanum Bromide 

(gamma spectrometer) 

Moderated 3He (neutron detector) 


10 nSv/hr - 200 uSv/hr (Cs-137) 


RadSeeker CS-G 

(Commercial Sodium Iodide) 

2” x 2” Commercial Sodium Iodide 

(gamma only) 


10 nSv/hr - 120 uSv/hr (Cs-137) 


Utilizing Symetrica’s Discovery Technology, licensed exclusively to Smiths Detection 

The display provides a historical graph of the intensity of the source. To the 

right of the history the real-time count rate and dose rate are shown constantly 

on every screen providing the much needed info to the user at all times. 

This Identification screen displays a list of alarms. In the case where 

multiple radionuclides are identified, they are listed by priority. The 

isotope category is further provided as well as a threat assessment, 

Green for Innocent and Red for a Threat. 


Smiths Detection, 21 Commerce Drive, Danbury, CT 06810 

Modifications reserved. 95593410 09/26/13 © Smiths Detection Group 

RadSeeker is a trademark of Smiths Detection Group Ltd. 

114


guardion 

NexT GeNeraTIoN PorTable Gc/ms 

chemIcal IdeNTIfIer aNd mIxTure aNalysIs sysTem 


• utilizes gC/MS technology to 

identify volatile and semi-volatile 

organic compounds including 

CWas and TiCs 

• Start up and ready to operate in 5 

minutes or less 

• analysis in 3 minutes or less 

allows for up to 30 sample runs 

on a single battery charge 

• Lightweight, compact and 

ruggedized for field operation 

• universal, broad-based sample 

collection and injection technique 

accommodates gas, liquid, and 

solid sampling 


GUARDION utilizes high speed, highresolution 

gas chromatography (GC) and a 

revolutionary miniaturized toroidal ion trap 

mass spectrometer (MS) to identify volatile 

and semi-volatile organic compounds in 

complex gases, vapors, liquids and solids. 

GUARDION is hand-portable and 

ruggedized for use in a hot zone or extreme 

environments. Its high speed GC combined 

with a miniaturized toroidal ion trap mass 

spectrometer redefines the size, weight, 

and speed for hand-portable GC/MS 

technology. 

GUARDION is ready to operate within five 

minutes from a cold start. The CUSTODION , 

a solid phase microextraction (SPME) fiber 

syringe, is used for simple sample collection 

and injection into the GC/MS system. 

Advanced low thermal mass GC technology 

enables rapid heating and cooling of the 

GC column, allowing 12-15 samples to be 

analyzed per hour. 

GUARDION features both a touch screen 

and keypad for operation, providing easeof-use 

in personal protective gear. All 

software required for sample identification 

and reporting is on board the system. It 

includes chemical warfare agent and toxic 

industrial chemical libraries as well as a 

hazards database for rapid decision support. 

Additionally, the system can operate from 

a single battery charge for up to 3 hours, 

depending on the number of samples 

analyzed. 

The GUARDION vacuum system includes 

a ruggedized, low-maintenance 

turbomolecular pump that does not need 

to be replaced. The direct GC to MS interface 

eliminates the need for bake-out, minimizing 

logistical burden. Easy-to-use software 

reduces training time. 

GUARDION is backed by first-rate service, 

training and 24/7/365 ReachBackID 

technical support to ensure optimum 

product performance. 

115

guardion 

gas Chromatography/Mass Spectrometry 

(gC/MS) 

GC/MS is considered the “gold standard” 

for chemical identification. This technique 

couples gas chromatography and 

mass spectrometry to identify single 

or multiple substances within complex 

samples. Additionally, it can identify trace 

compounds that can go undetected by other 

technologies. 

Miniaturized toroidal ion trap 

The toroidal trapping space of GUARDION‘s 

unique and revolutionary ion trap MS leads 

to reduced weight and power consumption, 

as well as use of a rapid, low-maintenance 

vacuum pumping system. GUARDION‘s 

advanced software ensures that its mass 

spectra can be used in conjunction with 

the NIST/EPA/NIH mass spectral library. 

Technical data 

general Specifications 

Technology 

Size 

Weight 

Gas chromatograph 

Mass spectrometer 

Vacuum system 


Environmental features 

Decontamination via 

Operating ranges 

User interface application for use 

Controller 

Power 

External data storage 

Input/output devices 

Gas Chromatography/Mass Spectrometry 

39 x 38 x 22 cm (15.5 x 15 x 9 in) excluding handle 

14.6kg (32 lbs.) including battery 

Helium carrier gas supply, internal disposable cartridge or external cylinder 

MXT-5 column, 5-m, 0.1mm i.d., 0.4 μm d f 

Temperature programming up to 300°C, ramp rate 120°C/min 

Split/splitless injection 

Toroidal ion trap 

Turbomolecular vacuum pump with diaphragm roughing pump 

Solid-Phase Microextraction (SPME) exposure to environment, head space, Tedlar ® bag, liquid, or solution 

System is sealed for operation in the hot zone 

Spray/wipe down 

Operational in extreme weather and temperatures ranging from 32°F to 113°F (0°C to 45°C). 

Humidity 0 to 95% RH 

The embedded GUARDION software is streamlined for rapid identification of substances in complex mixtures. 

This easy-to-use software is designed for use by non-experts and is optimized for operation in full PPE. Network 

enabled. Windows ® CE operating system, PEAC ® chemical hazards database 

Touch-screen embedded system 

Finger, stylus, or keypad navigation 

Removable, rechargeable Li-ion battery (2 – 3 hours run time) 

External power supply 

24-V vehicle power adaptor 

Full USB support 

Flash devices 

Mouse and keyboard compatible 

Ethernet capable 

available options 

Software 

Libraries 

Wireless capability 

Multiple colors available 

CHROMION advanced GC/MS software for PC 

NIST/EPA/NIH Mass Spectral Library 

Bluetooth communications between GUARDION unit and PC 

15.5” 

15.5” 

9” 

10.5” 

15” 

15” 

116 

For product information, sales, or service, please go to www.smithsdetection.com/locations 

Smiths Detection, 21 Commerce Drive, Danbury, CT 06810 USA 


GUARDION is a trademark of Smiths Detection Group Ltd. All other trademarks are the property of their respective owners.


HazMatID 

Elite 

HOTZONE HANDHELD FTIR CHEMICAL IDENTIFIER 


• Optimized for easy operation in 

personal protective gear 

• MIL-STD-810G certified for use 

in harsh conditions and hightemperature 

operation 

• Integrated pressure device for 

analysis of solid materials, plus 

direct touch-to-sample capability 

• Automated analysis of mixtures 

with available priority alerting 

for explosives, CWAs, TICs, and 

narcotics 

• Long-range, embedded RF 

wireless transmission 


HazMatID Elite is a next-generation 

handheld unknown solid and liquid chemical 

identifier that combines high performance 

with simplicity and performs an analysis in 

1 minute or less. Using Fourier Transform 

Infrared (FTIR) spectroscopy, HazMatID 

Elite is capable of identifying chemical 

warfare agents, explosives, toxic industrial 

chemicals, narcotics, suspicious powders, 

among other dangerous chemical classes. 

Analysis is performed by placing a small 

amount of unknown substance onto the 

diamond ATR sensor and applying pressure 

with an integrated press for solid samples. 

The sample interface also includes an 

integrated well for the containment of 

liquid samples. A second, touch-to-sample, 

diamond ATR interface is available for rapid 

analysis of pooled liquids and surface films, 

and enables robotics applications. 

MIL-STD-810G certified for operation in 

harsh conditions, HazMatID Elite has the 

widest thermal and solar operational range 

of any portable or handheld chemical 

identifier. Its revolutionary optical engine 

also provides high vibration immunity and 

resistance to mechanical disturbances seen 

during vehicle or human transport. 

The HazMatID Elite user interface contains 

a large display screen with a high viewing 

angle and visibility in direct sunlight 

conditions, large keypad controls for effective 

operation in protective gear, and an intuitive 

software workflow design. On-screen 

instructional graphics guide users through 

the essential operations of the device to 

maximize ease-of-use and reduce the 

training burden for security personnel. 

Long-range, embedded RF wireless 

transmission is also included for rapid 

communication of data out of the hotzone 

to aid in information integration, decision 

making, and connection to ReachBackID 

24/7/365 support services. PC-based 

command software provides advanced data 

handling capabilities for specialized users. 

117

HazMatID Elite 



Technology 

Size 

Weight 

Sample interface 

Decon 

Operational ranges 

User interface 

Power 

Wireless 

External data storage 

Libraries 

Available Options 

Command PC software 

Repeater 

Colors 

ClearSampler 

Fourier-Transform Infrared Spectroscopy 

26.9 x 14.3 x 7.9 (10 5/8 x 5 5/8 x 3 1/8 in) 

2.29 kg (5.05 lbs.) 

Diamond ATR sensor with integrated solid press and liquids well 

Second, touch-to-sample diamond ATR sensor for direct sampling 

IP-67 rated and sealed for decontamination by immersion 

Operational in extreme weather and temperatures ranging from -20°C to 50°C (-4°F to 122°F). 

Humidity ranging from 0-100% 

4.3 inches internally-bonded LCD color display for high visibility in direct sunlight conditions 

Individually-lit keypad and instructional graphics guide users through the operation of the device 

Rechargeable lithium-ion battery for 4 hours operation 

Disposable 123A battery compatible 

External IP-67 rated connector for mains or automobile power 

Embedded RF modem for 1 km line-of-sight data transfer 

FIPS 140-2 compliant encryption 

GPS included 


10,000 spectra of chemical warfare agents, explosives, narcotics, TICs, pesticides, white powder, and other 

chemical classes. User-defined libraries transferable from the HazMatID 

Advanced software package for data management and spectral reprocessing against upgraded databases 

(up to 35,000 spectra) 

RF repeater for extending the wireless data transfer range 

Olive drab or yellow 

ATR/FTIR surface sampling accessory for decon verification, explosives analysis and hazardous materials 

assessment 

Simplified user interface requires minimal training 

Instructional graphics guide users through device 

operation 

Clear and precise analysis results to enable decisive 

actions 

5.875” 

3.125” 

10.625” 

For product information, sales, or service, please go to www.smithsdetection.com/locations 

Smiths Detection, 21 Commerce Drive, Danbury, CT 06810 USA 


HazMatID is a trademark of Smiths Detection Group Ltd. All other trademarks are the property of their respective owners. 

118


ACE-ID 

HANDHELD, NON-CONTACT EXPLOSIVE, TOXIC 

CHEMICAL AND NARCOTICS IDENTIFIER 


• Rapidly identifies solids, liquids, 

gels and powders 

• Proprietary mixture analysis software 

enables identification of up to 

two components within sample 

• Integration software kit for remote 

operation and report generation 

• Compact, robust and lightweight 

• Easy to use intuitive, graphical 

interfaces and requires minimal 

training 


ACE-ID is a next-generation, handheld 

Raman identifier for explosives and 

precursors as well as narcotics and toxic 

chemicals. It identifies solids, powders, and 

water based solutions as well as performs 

mixture analysis. 

Utilizing Raman spectroscopy, ACE-ID 

enables non-contact analysis, yielding 

rapid results in seconds. Materials can be 

identified through translucent and semitranslucent 

containers such as plastic and 

glass. In addition, non-contact analysis is 

also supported by a software kit for remote 

operation. 

ACE-ID is ruggedized for use in severe 

climates and terrains. It is lightweight and 

can be operated with just one hand. 

An intuitive software interface guides users 

through the entire identification process 

making it easy-to-use by military explosive 

ordnance disposal technicians, civilian bomb 

squads and hazmat teams. 

ACE-ID utilizes an advanced optical platform 

to minimize heating dark samples during 

analysis. It provides operation using a 

rechargeable lithium battery and outputs an 

automated data report when required. 

ACE-ID is backed by ReachBackID , a firstrate 

24/7/365 service and support program to 

ensure optimum product performance. 

ACE-ID is a product from Smiths Detection, 

a leading worldwide provider of government 

regulated technology products and 

advanced services that aid in the detection 

and identification of chemical, biological, 

radiological, nuclear and explosive (CBRNE) 

material and other dangerous or illegal 

substances. 

119

Technical Data ACE-ID 


Technology 

Size 

Weight 

Sampling 

Library 

Start-up time 

Detection time 

Power 

Display 

Connectivity 


Storage temperature range 


Color 

Raman 

12.7 x 8.9 x 5.6 cm (5 x 3.5 x 2.2 in) 

0.45kg (1lb) 

Point and shoot 

About 500 substances with user library capability via laptop software to add samples of interest 

Less than 20 sec at 20 ° C (68 ° F) 

Less than 20 sec at 20 ° C (68 ° F) 

One lithium battery (SureFire or CR123A) or USB power source 

Touchscreen display (compatible with level A PPE gloves) 

Micro USB 

-20 ° C to +50 ° C (-68 ° F to 122 ° F) 

-40 ° C to +70 ° C (-104 ° F to 158 ° F) 

>95% 

Olive drab 

MIL-STD-810G certification pending 

Fast and easy analysis of multi-layered liquids, no 

sampling required. 

Ergonomically designed for one handed operation with 

touchscreen interface. 


Smiths Detection, 21 Commerce Drive, Danbury CT USA 

Modifications reserved. 95594452 10/14/13 © Smiths Detection Group Ltd. 

ACE-ID is a trademark of Smiths Detection Group Ltd. 

120


GasID 

PORTABLE GAS & VAPOR IDENTIFIER 


• Identifies unknown gases and 

vapors in seconds 

• No user calibration required 

• Easy to use in Level A gear 

• Can identify over 5,500 gases 

and vapors 

• ReachBack, 24/7/365 technical 

support 

When a Response team is called upon to 

deal with a potentially dangerous or toxic 

gas, the first and most crucial question 

is: “What are we dealing with?” The GasID 

answers this question in minutes. 

The GasID is a highly specific tool that 

measures how gases and vapors interact 

with infrared light. 

To obtain a gas or vapor chemical 

identification, the GasID’s compact sample 

collection device is carried down range 

into the hotzone and allowed to run for 

10 minutes. Once the gas or vapor is 

collected, the sample cell is detached from 

the pump, passed through the decon line, 

and then connected to the GasID system 

for analysis. Users are then walked 

step-by-step through a 

touch-screen analysis process. 

Once the GasID analyzes the unknown, 

it instantly compares the results against 

database libraries to provide an identity. 

Database libraries include: 

• WMD—nerve & blister agents 

• NIST/EPA Gas-Phase 

Infrared Database 

• Pacific Northwest National Lab Toxic 

Industrial Chemicals 


121

Technical Data GasID 


Technology 

Weight 

Size 

Sample Collection 

Environmental Features 

Operating Ranges 

User Interface 

Controller 

Power 

External Data Storage 

Input/Output Devices 

Fourier-Transform Infrared Spectroscopy 

25 lbs. (11.34 kg) 

17 ½” x 12” x 7 ½” (44.4 x 30.5 x 19 cm) 

Preconcentrated Sorbent Tube and Pump assembly or 

optional Tedlar bag interface 

The beam splitter uses a ZnSe substrate which is resistant to environmental conditions encountered in the field. 

Operational in extreme weather and temperatures ranging from 19°F to 122°F (-7°C to 50°C). Humidity ranging 

from 0-80% non-condensing. 

The GasID software is a streamlined, touch-screen application, 

specifically designed to be easy to use but very powerful in its capability. An identification for an unknown simply 

requires the user to advance each screen as it is presented. Network enabled. Requires security authorization to 

access. Windows ® operating system. 

Touch-screen embedded system 

Finger or Stylus control 

Internal battery or mains 

Computer battery (rechargeable Li ion) runs for 2 hours 

Heater battery (rechargeable Li ion) 

Pump battery (rechargeable NiCd) runs for 10 hours 


Flash devices 

Floppy drives 

CD-Rs 

Mouse and keyboard compatible 

Ethernet capable 

The GasID is intended to provide initial determinations and be used as an information resource in the field and not absolute or conclusive identification of unknown substances. 

The results provided by the GasID should be verified by using other appropriate techniques. Smiths Detection makes no recommendations nor does it assume any liability for 

how the information is utilized. 

7½” 

12” 

17½” 


Smiths Detection, 21 Commerce Drive, Danbury, CT 06810 

Modifications reserved. 95589088 09/28/10 ©2010 Smiths Detection 

GasID U.S. patent # 7,253,413 

GasID is a trademark of Smiths Detection Group Ltd. 

122

123

Smiths Detection – Your partner in airport security 

Smiths Detection is a leader in advanced security solutions for the aviation market worldwide providing: 

• The most comprehensive range of screening systems for baggage and people 

• Superior technologies in compliance with international standards 

• Complete solutions from one source for todays’ and future needs 

• Advanced concepts for enhancing passenger experience and operational efficiency 

• A worldwide service and support footprint 

124 

For product information, sales or service, 

please go to smithsdetection.com 

11120022 07/14

airport solutions

Create successful ePaper yourself

Delete template?

Save as template?