softail® - Shaw Harley-Davidson

g
h
SOFTAIL ® 291
Hand Controls
g. Chrome throttle And Idle CABle
AdJuster Covers
Replace the black rubber throttle and idle cable boots with
brilliant chrome. This two-piece “ball-milled” dust cover offers
a striking contrast to Original Equipment black cables, and a
natural finishing touch when installing braided cables. Easyto-install
with included hardware.
64115-04 $59.95
Fits ’96-’07 Touring models (except FLHRS with Original
Equipment handlebar) and ’96-later FXSTB, FLSTS and
’05-later FLSTN models. Will fit ’05-later Softail ® models
equipped with a separate purchase of a Front
Turn Signal Relocation Kit.
h. Chrome throttle CABle ClIP
Tie up the loose ends to complete your custom ride. When
matched to Original Equipment black cables or available
braided cables, these chrome-plated clips link the throttle/
idle cables with brilliant chrome.
91274-04 $29.95
Fits ’84-later models (except ’08-later Touring).
g. Chrome throttle And Idle CABle
AdJuster Covers
I
h. Chrome throttle CABle ClIP
J
I. Chrome ClutCh CABle ClIP
It’s all in the details. This high-polish chrome-plated clip
replaces the plastic clutch cable clip on the frame tube, and
locks the cable in place for a custom look. Kit includes chrome
cable clip, chrome backing plate, and chrome hardware for
easy installation.
91360-03 $29.95
Fits ’00-later Softail ® models (except FXCW/C
and FXSTSSE3).
J. Chrome BIllet ClutCh CABle ClAmP
The perfect addition to braided or stock black clutch cables.
This Clutch Cable Clamp is machined from aluminum billet,
and polished and plated for a lasting shine. The clamp is
designed to grip the cable and the frame down tube, adding a
custom look to the front of your cycle.
91147-02 $39.95
Fits models with 1-1/4" diameter front frame
down tube (except Touring, ’04-later XL, XR, and
’06-later Dyna ® models).
91252-03 $39.95
Fits models with 1-1/8" diameter front frame down tube.
Fits ’84-’08 Touring and ’84-’99 Softail models.
soFtAIl
K. BIllet ClutCh CABle AdJuster dust Cover
Replace the black rubber clutch cable boot with brilliant
chrome. Machined from billet aluminum, this two-piece
“ball-milled” dust cover offers a striking contrast to Original
Equipment black cables, and a natural finishing touch when
installing a braided clutch cable. Easy-to-install with included
hardware.
64108-03 $49.95
Fits ’00-later XL, Dyna ® and Softail (except FLSTSE) models.
’00-’03 XL models require installation of Clutch Cable Clamp
P/N 91147-02, and ’04-later XL models require installation of
Clutch Cable Clamp P/N 91249-04 (sold separately).
I. Chrome ClutCh CABle ClIP
J. Chrome BIllet ClutCh CABle ClAmP
K
l
l. BIllet BrAKe lIne ClIP
It’s the details that count. Replace the Original Equipment
black brake line clamp with this beautifully chrome-plated
billet aluminum clip. Sized for Original Equipment or accessory
braided brake lines, these “ball-milled” clips mount in
the factory position for easy installation. Kit includes chromeplated
mounting hardware.
91336-03 $21.95
For Original Equipment Brake Lines. Fits ’00-’07 FXST,
FXSTB, FXSTC, FXSTD, and FXDWG models equipped with
Original Equipment Brake Lines.
91364-03 $21.95
Fits ’00-later FXST, FXSTB, FXSTC, FXSTD, and FXDWG
models equipped with Braided Brake Lines. Also fits
’08-later FXST, FXSTB, FXSTC and FXDWG with
Original Equipment Brake Lines.
92006-05 $38.95
For Original Equipment Brake Lines. Fits ’97-’07 FLST,
FLSTC, FLSTF, and FLSTN models. (two per kit)
K. BIllet ClutCh CABle AdJuster
dust Cover
l. BIllet BrAKe lIne ClIP
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.