Catalogue - Usi Porta Doors

SLOT-MILLED
larger samples of colours see page 136-138 DOOR LEAF CONSTRUCTION
The door leaf consists of a fi nger jointed softwood frame fi lled with a perforated
HQ CPL veneer
chipboard, reinforced with an internal plywood frame. The frame and the core
are covered, on both sides, with an HDF board.
White
Oak 1
Milano
Grey
Euroinvest
Oak 2
Milano
Beech
Porta
Oak 3
Milano
Mahogany Maple Walnut
Oak 4
Milano
Oak 5
Milano
LEAF EDGE PROFILE
“K” profi e leaf edge.
Both side edges and the upper edge of the leaf covered with leaf-colored skirting
tape.
FINISHING
The leaf is covered with 0.2 mm HQ CPL veneer (Continuous Pressure Laminate
High Quality).
MODELS
8 patterns: from „A” to „H”.
Door leaf is available in version for single sliding door without hinges and rebate
and with a groove for guiding element slot-milled in the bottom edge of the door
leaf (included in the system) 1 .
ACCESSORIES – included in the leaf price
• two standard pintle hinges
• three hinges for a leaf of dimension ”100”
• lock: for regular key, bathroom lock or for cylinder insert
• preparation for shortening up to 60 mm
• round fl ush handle (for sliding doors)
LEAF SIZES (page 131, table 1)
Single leaf: „60“, „70“, „80“, „90“, „100“
Double leaf: „120“ ÷ „200“ 2
RECOMMENDED DOOR FRAMES (from page 102)
• Door frame, fi xed width: 100 mm
• Adjustable Porta SYSTEM door frame
• Metal door frame
NOTES:
• Depending on the veneer color, we offer two grove colors: light brown or dark brown.
Door leaves – cross sections
1
A, F and H designs in the sliding door version – for an additional charge – require to be
ordered through the Contract Department.
2
Arbitrary selection of door leaf sizes for double doors.
perforated chipboard
PORTA recommends
To use this product to all types of premises, especially everywhere where the doors are exposed to intensive use. Suggested for
hotels, office buildings, public places and houses with higher standard.
Leaf with a door frame covered with CPL HQ veneers are guarantee the highest quality and comfort of a multi-use door (Long Life
Product).
Additional charges (option)
„100” size
ventilation undercut
third hinge for the leaf dimensions “60”, “70”, “80” or “90”
hook lock with side handles (for sliding doors)
hinge covers (set on one pc)
handle with escutcheon
34
pattern A pattern B pattern C pattern D pattern E pattern F pattern G
pattern H
35