Operating Manual (PDF) - Affordablelabovens.com

More documents

Recommendations

Info

7 Handling and control This chapter explains the operating elements of the Heratherm Incubators IMC 18 in addition to providing operating instructions. Figure 7-1: Control panel Heratherm Incubator IMC 18 Table 7-1: <strong>Operating</strong> elements of the Heratherm Incubators IMC 18 No. Designation Function 1 Display with permanent indication of the current useable space temperature in °C in two figures (a switching over to other temperature units is not possible). 2 Increases the desired temperature by 1 °C (33.8 °F). 3 Decreases the desired temperature by 1 °C (33.8 °F). 4 Switches the interior light on or off. 5 Switches the Heratherm Incubator IMC 18 on or off. Thermo Scientific Heratherm IMC 18 7-1
Handling and control Powering up and down Powering up and down Switch the Heratherm Incubator IMC 18 on by pressing button (Fig. 7-1; 5). The display (Fig. 7-1; 5) is activated and shows the current useable space temperature. To switch off the Heratherm Incubator IMC 18, press button switches itself off and the display turns off. (Fig. 7-1; 5) again. The device Setting the temperature Interior light You can preselect temperatures between 17 °C and 40 °C (+63 °F and +104 °F). The thermal output and cooling capacity can be influenced by: • the ambient temperature, • the number of samples which are to be heated up or cooled down, • the frequency with which the door is opened. Press button (Fig. 7-1; 3), in order to reduce the required temperature by 1 °C (34 °F) each time or press button (Fig. 7-1; 2), in order to increase the temperature by 1 °C (34 °F) each time. The display (Fig. 7-1; 1) shows the set required temperature when you press button. If you wish to turn the interior light on or off, press the (Fig. 7-1; 4) button. 7-2 Heratherm IMC 18 Thermo Scientific
Page 2 and 3: © 2010 Thermo Fisher Scientific In
Page 4 and 5: Table of contents Chapter 9 Cleanin
Page 6 and 7: Safety Information Safe usage instr
Page 8 and 9: Safety Information Intended use of
Page 10 and 11: 3 Installation Environmental condit
Page 12 and 13: 4 Description of unit Device overvi
Page 14 and 15: . Description of unit Condensation
Page 16 and 17: Installation procedures Mains conne
Page 20 and 21: 8 Shut-down Shutting the device dow
Page 22 and 23: Cleaning and disinfection Wipe / sp
Page 24 and 25: Cleaning and disinfection Wipe / sp
Page 26 and 27: 11 Disposal Contamination hazard Th
Page 28 and 29: 12 Technical Data Designation Volum
Page 30 and 31: 13 Contact Information Overview of

Operating Manual (PDF) - Affordablelabovens.com

Create successful ePaper yourself

Delete template?

Save as template?