Flyer - EcoSeal - Knauf Insulation

Jobsite safety
ECOSEAL DRAWS THE LINE ON:
• Does not require full body protection or external air supply
Water-Based Elastomeric Sealant
www.knaufinsulation.us
• No hazardous chemicals mixed at the jobsite; no concerns for
worker exposure
• No jobsite quarantine; safe for other trades to work in the home
during installation
• No hazardous VOC’s released while curing. Meets or exceeds all
State and Federal requirements for VOC’s for architectural sealants
Performance
• Air leakage resistance exceeds
EPA Energy Star requirements 1
• Limited lifetime warranty gives your
customers peace of mind
• Readily adheres to seams and
doesn’t crack
• Sound Transmission Class (STC)
Sustainability
• Water based; contains no solvents
• No hazardous materials
• Virtually no Volatile Organic Compounds
(less than 0.3%)
• No CFC’s or HCFC’s used
in manufacturing or installation
Cost efficiency and simplicity
• Low start-up cost. All necessary equipment
(including airless sprayer) for only $3900
• Ready to use straight from the bucket with no mixing required
• Cleans up with water
• Single pass application; just spray and walk away
values beat foam 2
• Class A Rated for fire and smoke 3
• Seals areas traditional spray
foam cannot seal
• Wide range of application
temperatures, 20° F to 115° F
(may require a portable heater in
below freezing conditions)
1
“Air Infiltration Testing” for Knauf Insulation by NAHB
Research Center #4109007032710. March 27, 2010.
2
Comparative testing at Riverbank Lab, June 2010 using Knauf
Insulation EcoSeal with EcoBatt and Light Density Foam.
3