MSDS - Taski R2L Plus 2010 - Melbourne Cleaning Supplies
MSDS - Taski R2L Plus 2010 - Melbourne Cleaning Supplies
MSDS - Taski R2L Plus 2010 - Melbourne Cleaning Supplies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Name<br />
Additional<br />
Information<br />
TASKI <strong>R2L</strong>-PLUS<br />
16. OTHER INFORMATION<br />
AMINE: CAUTION THIS PRODUCT CONTAINS AN AMINE. DO NOT ADD NITRITES or other NITROSATING<br />
AGENTS to this product due to the potential for NITROSAMINE formation. Nitrosamines are potent carcinogens<br />
and some have been shown to cause severe acute (heart, brain, blood, liver - kidney) damage as well as chronic<br />
effects (reproductive effects, liver - lung and kidney tumours).<br />
RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid<br />
exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken.<br />
Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air<br />
powered or air supplied respirators should be considered where prolonged or repeated use is necessary.<br />
EXPOSURE STANDARDS - TIME WEIGHTED AVERAGE (TWA) or WES (WORKPLACE EXPOSURE<br />
STANDARD) (NZ): Exposure standards are established on the premise of an 8 hour work period of normal<br />
intensity, under normal climatic conditions and where a 16 hour break between shifts exists to enable the body to<br />
eliminate absorbed contaminants. In the following circumstances, exposure standards must be reduced: strenuous<br />
work conditions; hot, humid climates; high altitude conditions; extended shifts (which increase the exposure period<br />
and shorten the period of recuperation).<br />
ABBREVIATIONS:<br />
ACGIH - American Conference of Industrial Hygienists.<br />
ADG - Australian Dangerous Goods.<br />
BEI - Biological Exposure Indice(s).<br />
CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds.<br />
CNS - Central Nervous System.<br />
EC No - European Community Number.<br />
HSNO - Hazardous Substances and New Organisms.<br />
IARC - International Agency for Research on Cancer.<br />
mg/m3 - Milligrams per Cubic Metre.<br />
NOS - Not Otherwise Specified.<br />
pH - relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline).<br />
ppm - Parts Per Million.<br />
RTECS - Registry of Toxic Effects of Chemical Substances.<br />
STEL - Short Term Exposure Limit.<br />
SWA - Safe Work Australia.<br />
TWA - Time Weighted Average.<br />
HEALTH EFFECTS FROM EXPOSURE:<br />
It should be noted that the effects from exposure to this product will depend on several factors including: frequency<br />
and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of<br />
application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible<br />
scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.<br />
PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:<br />
The recommendation for protective equipment contained within this Chem Alert report is provided as a guide only.<br />
Factors such as method of application, working environment, quantity used, product concentration and the<br />
availability of engineering controls should be considered before final selection of personal protective equipment is<br />
made.<br />
Report Status This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the<br />
manufacturer's Safety Data Sheet ('SDS').<br />
It is based on information concerning the product which has been provided to RMT by the manufacturer or<br />
obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate<br />
safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of<br />
the product should be obtained directly from the manufacturer.<br />
While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide<br />
any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss,<br />
injury or damage (including consequential loss) which may be suffered or incurred by any person as a<br />
consequence of their reliance on the information contained in this SDS.<br />
Prepared By Risk Management Technologies<br />
5 Ventnor Ave, West Perth<br />
Western Australia 6005<br />
Phone: +61 8 9322 1711<br />
Fax: +61 8 9322 1794<br />
Email: info@rmt.com.au<br />
Page 4 of 5<br />
RMT<br />
Reviewed: 01 Oct <strong>2010</strong><br />
Printed: 01 Oct <strong>2010</strong>