The Caravan Towing Guide:1 - National Caravan Council

More documents

Recommendations

Info

RAISE the release handle CLICK the release handle (ensure the coupling is fully on the ball) and then CONFIRM coupling engagement by raising the caravan a little using the jockey wheel, WIND UP the jockey wheel fully then LIFT the jockey wheel column fully 18
CLAMP the jockey wheel with its locking lever CONNECT the electrical system Note: <strong>The</strong> car shown has a 7N and 7S connection, not a single 13 pin plug. CONNECT the breakaway cable Note: If the towing bracket does not have a dedicated loop, wrap the cable around the ball stem and then clip back onto the cable. 19
Page 1 and 2: THE CARAVAN TOWING GUIDE Published
Page 3 and 4: What’s covered by the guide: The
Page 5 and 6: Optional equipment Items made avail
Page 7 and 8: THE CAR The towing vehicle in this
Page 9 and 10: CALCULATING PAYLOAD AND ACTUAL LADE
Page 11 and 12: Your car’s MAM is not exceeded, Y
Page 13 and 14: The loading process Follow these si
Page 15 and 16: HITCHING UP AND UNHITCHING YOUR CAR
Page 17: ENGAGE the car’s handbrake fully
Page 21 and 22: Walk all around the caravan to ensu
Page 23 and 24: BREAKAWAY CABLE All caravans with a
Page 25 and 26: When going uphill, change gear in g
Page 27 and 28: TOWING MIRRORS The law demands that
Page 29 and 30: Wheel nuts or bolts should be check
Page 31 and 32: Drivers who passed a car test on or

The Caravan Towing Guide:1 - National Caravan Council

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?