2014 V-TWIN Roland Sands

Pro Step Handlebars 30,5 cm (12”)
• 31,8 mm (1-1/4”) diameter lower section of handlebar
• standard 25,4 mm (1”) 10 diameter cm (4”) upper section allows for mounting of stock or
FINISH aftermarket hand controls
PART #
•
contrast
Slotted and
cut
drilled for internal wiring
0601-1985
• Requires use of RSD’s Nostalgia 1-1/4” risers or other
black aftermarket ops 1-1/4” risers
0601-1986
standard 16,5 cm (6.5”)
86 cm (34”) WIDE X 30,5 cm (12”) TOTAL RISE, 19,6 cm (7-5/8”) END
RISE FINISH X 16,5 cm (6-1/2”) CENTER WIDTH X 10 cm (4”) PULLBACK PART #
contrast cut 0601-1987
black ops 0601-1988
standard 30,5 cm (12”)
FINISH PART #
contrast cut 0601-1989
black ops 0601-1990
Pro Step Handlebars 16,5 cm (6.5”)
• 31,8 mm (1-1/4”) diameter lower section of handlebar
• 25,4 mm (1”) diameter upper section allows for mounting of stock or
aftermarket hand controls
• Slotted and drilled for internal wiring
• standard Requires use 10 of cm RSD’s (4”) Nostalgia 1-1/4” risers or other
aftermarket 1-1/4” risers
FINISH PART #
81,8 contrast cm (32-1/3”) cut WIDE X 16,5 cm (6-1/2”) TOTAL RISE, 11,50601-1985
cm (4-1/2”)
END RISE X 16,5 cm (6-1/2”) CENTER WIDTH X 10 cm (4”) PULLBACK
black ops 0601-1986
standard 16,5 cm (6.5”)
FINISH PART #
contrast cut 0601-1987
black ops 0601-1988
standard 30,5 cm (12”)
FINISH PART #
contrast cut 0601-1989
black ops 0601-1990
Pro Step Handlebars 10 cm (4”)
• 31,8 mm (1-1/4”) diameter lower section of handlebar
• 25,4 mm (1”) diameter upper section allows for mounting of stock
or aftermarket hand controls
• Slotted and drilled for internal wiring
• Requires use of RSD’s Nostalgia 1-1/4” risers or other
aftermarket 1-1/4” risers
81 cm (32”) WIDE X 10 cm (4”) RISE 15,3 cm (6-1/8”) CENTER WIDTH,
70 mm (2-3/4”) PULLBACK
standard 10 cm (4”)
FINISH PART #
contrast cut 0601-1985
black ops 0601-1986
standard 16,5 cm (6.5”)
FINISH PART #
contrast cut 0601-1987
black ops 0601-1988
standard 30,5 cm (12”)
ROLAND SANDS DESIGN | 53