Accessories for CRT reversing video systems - Petemar

Accessories for CRT reversing video systems
PerfectView SWITCH connects
what you want connected
Using the switchbox you can connect up to three cameras to one monitor and control them individually! PerfectView
SWITCH is compatible with almost any WAECO camera. The cameras can be activated either automatically or manually
(e.g. the reversing camera via reverse gear, the side-mounted cameras via the indicator).
Monitor with 2 cameras
The M 50R1 CRT monitor has two
camera sockets.
You can connect, for example,
a reversing camera and
a front camera.
SWITCH
Turning 2 into 4 with
PerfectView SWITCH
The same monitor, thanks to the switchbox,
now with up to four cameras:
for example, a reversing camera, two side cameras
(one each left and right), and an additional camera
to monitor the working area
WAECO PerfectView SWITCH 3.19
Switchbox for additional reversing video applications
For running up to three independently controlled cameras from one monitor camera input
Features & functions
› Cameras can be activated either automatically or manually
(e.g. reversing cameras via reverse gear, side-mounted cameras via indicators)
› Power consumption: 0.84 watts max. (without cameras)
› Suitable for 12- and 24-volt vehicle electrics
NEW
E-approved
Scope of delivery: switchbox, cable for connection to vehicle electrics, switch for manual activation
of the cameras, switch box connection cable, fitting materials, installation and operating instruction
Product
WAECO PerfectView Accessories 3.19
Cable adapters
Ref. No.
PerfectView SWITCH 9102200034
ADAPT1
Camera adapter
Features & functions
The two cable systems used by WAECO up to 2009 (black or grey) are replaced as of 2010 by a
new, uniform cable system.
› Adapters for adapting installed cables when existing components are replaced by new ones;
eliminate the need to re-lay cables
› Easy allocation to cable systems with colour-coded plug connectors
› Clear identification of suitable connections on the adapters
More adapters available on request
NEW
ADAPT6
Monitor adapter
Product
Cable adapters
Ref. No.
ADAPT1 Camera adapter,
new socket / old plug (6-pin DIN, black cable) 9102200042
ADAPT6 Monitor adapter,
new plug / old socket (6-pin DIN, black cable) 9102200057
Note: Adapters are only required for connecting the new monitors and cameras to older WAECO cables.
Any questions Please contact the Dometic WAECO representation in your country.
Contents, specifications and availability are subject to change serving the technical improvement.
92 – 93