Eng - Havells-Sylvania

Lamp Information for luminaires
HID metal halide - Ceramic arc tube
Note: Ceramic Metal halide lamps and Electronic Gear
Lamp warm-up - Ceramic metal halide lamps require approximately 5-12 minutes warm up time to reach full output. Several colour changes are often experienced as part of the
warm up process.
Hot Re-strike - Hot lamps must cool down sufficiently until the gear can re-ignite them. Length of time this takes will depend upon the ambient and lamp temperature.
Timed ignition - Gear will shut down to protect itself when lamps are damaged and at end of lamp life. Constant attempts to strike such lamps would result in a reduction in gear
life. Once the lamp has been replaced and the gear reset (by switching the unit off at the mains) the gear will operate as normal.
Thermal protection - Gear will shut down to protect itself when high ambient and internal temperatures are reached that would substantially decrease gear life. Such occurrences
may occur in areas with poor ventilation or sometimes at the end of lamp life. Once the temperature has reduced to a safe level the gear will automatically re-set itself and operate
normally.
Title Sylvania ZVEI ILCOS Ømm Length Watts Cap/ Initial Peak Beam Average Colour Colour Colour
(mm) Nominal Base Lumens Intensity (50%) Rated Life Temp. Rendering Rendering
(IL) (Cd)
(Hrs) (ºK) (Ra) (Group)
Metal halide ceramic capsule - HIT-TC-CE MT 14 85 20 G8.5 1700 - - 6000 3000 81 1B
UV Stop
CMI-TC HIT-TC-CE MT 17 85 35 G8.5 3750 - - 12000 3000 87 1B
CMI-TC HIT-TC-CE MT 17 85 70 G8.5 6700 12000 3000 89 1B
Metal halide ceramic capsule CMI-T HIT-CE MT 20 90 35 G12 3750 - - 12000 3000 83 1B
UV Stop
CMI-T HIT-CE MT 20 90 70 G12 6700 - - 12000 3000 87 1B
CMI-T HIT-CE MT 20 90 70 G12 6700 - - 12000 4200 93 1A
CMI-T HIT-CE MT 20 100 150 G12 13500 - - 12000 3000 83 1B
CMI-T HIT-CE MT 20 100 150 G12 13000 - - 12000 4200 88 1A
Superia CMI-T S CMI-T WDL HIT-CE MT 20 90 35 G12 4000 - - 15000 3000 91 1B
S CMI-T WDL HIT-CE MT 20 90 70 G12 7300 - - 15000 3000 90 1B
S CMI-T NDL HIT-CE MT 20 90 35 G12 4200 - - 15000 3000 92 1B
S CMI-T NDL HIT-CE MT 20 90 70 G12 7300 - - 15000 3000 96 1B
S CMI-T Mini HIT-CE MT 13.3 52 20 GU6.5 1900 - - 15000 3000 85 1B
Metal halide ceramic tubular CMI-TD HIT-DE-CE MD 22 117.6 70 Rx7s 6200 - - 9000 3000 85 1B
double ended
UV Stop
CMI-TD HIT-DE-CE MD 22 117.6 70 Rx7s 6200 - - 9000 4200 90 1A
CMI-TD HIT-DE-CE MD 25 135.4 150 Rx7s-24 13500 - - 9000 3000 85 1B
CMI-TD HIT-DE-CE MD 25 135.4 150 Rx7s-24 12500 - - 9000 4200 90 1A
Metal halide ceramic tubular S CMI-TT HIT-CE MT 32 156 70 E27 6300 - - 12000 3000 83 1B
UV Stop
S CMI-TT HIT-CE MT 47 211 150 E40 13500 - - 7000 3000 85 1B
Metal halide ceramic elliptical - HIE-CE ME 71 156 70 E27 5900 - - 12000 3000 83 1B
- HIE-CE ME 91 226 150 E40 13000 - - 7000 3000 85 1B
UV Stop
- QT32 HEGT/W 32 105 250 E27 4210 - - 2000 2900 100 1A
Metal halide ceramic elliptical - HIT-CE ME 54 138 70 E27 5700 - - 9000 3000 87 1B
UV Stop
- HIT-CE ME 54 138 70 E27 5600 - - 9000 4200 90 1A
- HIT-CE ME 54 141 100 E27 8600 - - 9000 3000 87 1B
- HIT-CE ME 54 138 150 E27 12500 - - 9000 3000 87 1B
- HIT-CE ME 54 138 150 E27 12500 - - 9000 4200 90 1A
Metal halide ceramic reflector - HIPAR20 MR 65 95 35 E27 - 26000 10 9000 3000 81 1B
UV Stop
- HIPAR20 MR 65 95 35 E27 - 5000 30 9000 3000 81 1B
- HIPAR-L30 MR 97 125 35 E27 - 44000 10 9000 4200 81 1B
- HIPAR-L30 MR 97 125 35 E27 - 7400 30 9000 3000 81 1B
- HIPAR-L30 MR 97 125 70 E27 - 68000 10 9000 4200 83 1B
- HIPAR-L30 MR 97 125 70 E27 - 10000 40 9000 4200 83 1B
Technical 755