CORRIE - Kelty
CORRIE - Kelty
CORRIE - Kelty
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SETTING UP YOUR TENT<br />
1. Assemble the poles (Fig. 1A, 1B and 1C).<br />
DO NOT allow the shockcord to snap the pole sections together, this<br />
can damage the poles.<br />
Figure 1A Figure 1B Figure 1C<br />
2. Spread the tent body on the ground.<br />
3. Locate the wider end of the tent body with the door<br />
(Fig. 3A) and match to the wider end of the hubbed<br />
pole (Fig. 3B).<br />
Figure 3A<br />
Figure 3B<br />
4. Insert the pole ends into the grommet holes in the<br />
webbing. You might need to flex the pole to insert<br />
the other end of the pole into the grommets at the<br />
opposite tent corner.<br />
PITCHING INSTRUCTIONS<br />
Figure 4