endeavor snowboard design est.2002 - Noble Custom Distribution

TECHNICAL SPECIFICATIONS
Tech Spec
01 SHAPE
Tech Spec
02 FIBERGLASS
Directional Shape - This is your classic shape for all
mountain riding. This board has a longer nose to help you
ride in any condition.
Twin Shape - A symmetrical shape will help you balance
when riding switch or regular. There is no park, jib or
snow conditions that these shapes can not handle.
Taper - The 3mm taper helps to sink the tail of the board
while lifting the nose in deep snow. This allows the
board to float effortlessly and eliminates the need for the
rider to lean-back in powder, which prevents leg fatigue.
Mid Wide - More generous in waist width than a regular
board but not as hefty as a wide board, the mid wide
eliminates toe and heel drag for those rocking size US 10
to 10.5 mens boots.
Wide Board - Designed for the big boys blessed with big
feet. The generous waist width accommodates big boots
and provides more stability and fun for the rider.
Biax Fiberglass - Lightweight but very durable and
torsionally forgiving, ideal for jibbers and park riders
wanting a mellow flex.
Triaxial Fiberglass - This fiberglass helps with
overall strength, weight, and torsional flex, ideal for all
conditions.
Basalt Fiberglass - An eco-alternative, Basalt is a
premium aerospace material made from molten basalt
and declassified by the military in 1995. Unparalleled
strength-to-weight ratio gives our premium freestyle
boards an edge.
Tech Spec
03 BASE MATERIAL
Sintered 7500 Base - The fastest base with high wax
absorption, vibrant sublimated graphics, and superior
durability.
Extruded 1300 Base - This base material is easy to repair
and comes with a fast factory wax. Great for printing and
requires very little maintenance.
Tech Spec
04 STANDARD FEATURES
Tech Spec
05 WOOD CORES
Tech Spec
06 ENHANCERS
Carbon Stringers - Carbon is used to stiffen the board in
specific locations without adding any additional weight.
It also drastically increases the performance of the board
by making it more responsive by adding memory and
“POP”.
Rubber - Not all vibrations are bad. Some vibrations
add life and feel to a board, while other vibrations can
cause things like chatter in icy conditions. Our rubber
is strategically placed to eliminate those nasty highfrequency
vibrations while increasing the overall bond
of the materials.
Factory Waxed - Every snowboard is waxed with our
high grade Italian made wax to ensure you’ll be the
fastest one down the hill.
Factory Tuned - Every snowboard is detuned to prevent
topsheet chipping and razor sharp edges, providing the
best out-of-bag ride.
One Year Warranty- Our standard warranty covers all
manufacturing defects. Endeavor boasts a less than 1%
warranty return rate which means chances are, you’re not
going to have a problem with your board.
Poplar Wood Core - Tried, tested, and proven to be the
most responsive wood core species, Poplar Cores have
excellent flex, memory, and strength.
Poplar Lite Wood Core - A higher grade poplar than
the basic poplar wood core, the Poplar Lite Core boasts
a 10% reduction in weight, making your deck that much
lighter under your feet.
Negative Core Profile - The best riding core profile
chosen by the pros. Slightly profiled between your feet at
the center of the board to eliminate weight and allow the
board to flex more naturally and freely.
Wings - Exclusive to the BOD Series, the Wings raise the
contact points 3mm off the base, creating a ride similar
to a reverse camber but with the benefits of a cambered
board.
Bamboo Topsheet - One of the most renewable,
sustainable grown materials out there. Bamboo was great
choice to help make a stiffer board without the use of
more fiberglass and carbon.
Tech Spec
07 STANDARD PROFILES
TAIL
TAIL
FLAT KICK TAIL
FLAT KICK TAIL
Camber - Tried, tested and true performance, these boards come with convex rise from its contact points. A rider’s edge hold and pop
derive from the pressure exerted and expelled when camber is flexed under a rider’s weight.
FLAT AREA
INSERTS
INSERTS INSERTS
CAMBER AREA
Reverse Camber - Endeavor’s Reverse Camber is a subtle concave or arcing profile that curves upward. The idea is to reduce
pressure on the contact points of the board and make it a looser, more fun ride.
Tech Spec
08 ENHANCED PROFILES
INSERTS INSERTS
INSERTS
REVERSE CAMBER FLAT AREA
Camber with Flat Kicks - Increasing the benefits of the cambered board, the camber with Flat Kick (found on the High5 Series)
rides like a longer snowboard for the size. Because of the quick radius to flat on the nose and tail, the effective edge runs further than
a traditional snowboard. This means you can drop 2cm in length and still have the same control.
CAMBER AREA
Zero Camber with Wings - Zero Camber with Wings has the best of both worlds. With no pressure on the contact points due to the
Wings, this board feels “loose” and “catch free” like a traditional reverse camber. However, it remains relatively more “stable” and
“predictable” like regular camber boards.
WINGS WINGS
ZERO CAMBER AREA
INSERTS
INSERTS
NOSE
NOSE
FLAT KICK NOSE
FLAT KICK NOSE
Page 21/ ©endeavor snowboard design 2011/12