Werkzeug_englisch_Jan 2009 - Iftode Universal SNC

Tungsten carbide for single disc machines
Describtion of tungsten carbide
Tungsten carbide is main part of hard metal (90-94%).
Tungsten carbide is very hard and durable with a very
good price-performance ratio and thus very efficient for
grinding floors.
Tungsten carbide disc with 5 discs
For rough grinding of cement bonded surfaces. For
grinding paint, coatings, lacquer. Very aggressive due to
the rotation of the discs and the weight of the disc – 15kg.
With 5 rotating split disc 127mm, grit 14, on steel disc Ø
400mm.
19.17160J
Tungsten carbide disc with 5 discs is part of the Mulitpurpose
disc!
Spare split disc grit 10 Ø 127mm
Spare split disc grit 14 Ø 127mm
19.17170J
19.17165J
Tungsten carbide ring disc grit 14
For universal use. For rough grinding of cement bonded
surfaces, sintered surfaces. For grinding of paint, coatings
and thin remainders of adhesive. For grinding uneven
surfaces. Steel disc Ø400mm
19.17180I
Tungsten carbid ring disc grit 10
For rough grinding of cement bonded surfaces, sintered
surfaces. For removing remainders of adhesive.
For grinding uneven surfaces. For roughening concrete
surfaces. Steel disc Ø 400mm
19.17182J
Tungsten carbide ring disc grit 6
Very rough. For removing ductile adhesive, bitumen, felt
board and remainders of floor coverings. For milling tile
adhesive and remainders of plaster. Steel disc Ø 400mm
19.17181J
Spare ring Ø 400mm grit 14
Spare ring Ø 400mm grit 10
Spare ring Ø 400mm grit 6
19.17185J
19.17188J
19.17187J
Tungsten carbide disc 40mm
For grinding spackle, screed and adhesive films. More
efficient than abrasives. Double sided metal disc
Ø400mm. Used with drive disc 19.14211/12.
Grit 10
Grit 14
Grit 24 (screed)
Grit 36 (spackle)
19.17125J
19.17130J
19.17135J
19.17140J
www.universalconstruct.ro
9