MSDS - Agrium Wholesale

Special "Turf" Liquid 15-3-5-3S Urea Ammonium Polysulfate
Potash Thiosulfate
Page Number: 4
EXPOSURE LIMITS
Alberta TWA: 10 mg/m 3 Inhalable, 3 mg/m 3 Respirable, for Particulate Not Otherwise
Regulated.
Fed OSHA PEL: 15 mg/m 3 Total dust, 5 mg/m 3 Respirable fraction, for Particulates Not
Otherwise Regulated.
Federal, State or Provincial exposure limits may vary by jurisdiction. Consult local authorities
for acceptable exposure limits in your area.
Section IX. Physical and Chemical Properties
PHYSICAL STATE AND
APPEARANCE
MOLECULAR WEIGHT
Liquid. (Clear to slightly hazy liquid.)
Not available.
COLOR
Clear pale green.
pH (10% SOLN/WATER)
BOILING POINT
MELTING POINT
CRITICAL TEMPERATURE
SPECIFIC GRAVITY g/cc
VAPOR PRESSURE
VAPOR DENSITY
6.7 [Neutral.]
100 °C
Salt out temperature: -15°C
(5°F)
Not available.
1.21 (Water = 1)
BULK DENSITY
kg/m 3 ; lbs/ft 3 1200 kg/m 3 ; 75 lbs/ft 3 ;
10 lbs/gal (US);
12 lbs/gal (UK).
Not available.
Not available.
ODOR
ODOR
THRESHOLD
TASTE
VOLATILITY
SOLUBILITY
DISPERSION
PROPERTIES
WATER/OIL DIST.
COEFF.
Odorless.
17 PPM (Ammonia)
Acid. Saline.
Not available.
Easily soluble in cold water, hot
water.
Easily dispersed in any proportion in
cold water and hot water.
Not available.
Section X. Stability and Reactivity Data
STABILITY
The product is stable.
INSTABILITY
TEMPERATURE
CONDITIONS OF
INSTABILITY
INCOMPATABILITY WITH
VARIOUS SUBSTANCES
CORROSIVITY
Not available.
No additional remark.
Very slightly reactive with metals.
Slightly corrosive to copper, iron, and steel.
SPECIAL REMARKS ON
REACTIVITY
SPECIAL REMARKS ON
CORROSIVITY
No additional remark.
Incompatible with copper alloys. Corrosive to brass. Corrosive to ferrous metals and alloys.
Contact your sales representative or a metallurgical specialist to ensure compatability with
system equipment.
Continued on Next Page