POLYMER TECHNOLOGIES: CHOCKFAST ECUADOR
GROUTS EPOXICOS PARA FIJACIÓN DE GENERADORES, TURBOGENERADORES, COMPRESORES Y DEMÁS MAQUINARIAS EN REFINERIAS DE PETROLEO E HIDROELECTRICAS DEL MUNDO
GROUTS EPOXICOS PARA FIJACIÓN DE GENERADORES, TURBOGENERADORES, COMPRESORES Y DEMÁS MAQUINARIAS EN REFINERIAS DE PETROLEO E HIDROELECTRICAS DEL MUNDO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ITW <strong>POLYMER</strong> <strong>TECHNOLOGIES</strong><br />
Industrial Grouts, Polymers and Foundation Systems<br />
Epoxy Grout - versus - Cement<br />
1. Compressive Strength<br />
105.5 MPa – 131 MPa. 20.7 MPa – 41.4 MPa.<br />
2. Tensile Strength<br />
13 MPa – 32.3 MPa. 2.8 MPa – 4.1 MPa.<br />
3. Will not shrink in liquid Can shrink in liquid<br />
or solid state.<br />
and / or solid state.<br />
4. Impervious to most liquids, Can be affected by all.<br />
chemicals, lubricants and<br />
freeze / thaw cycles.<br />
5. Rapid cure 24 – 36 hrs. Slow curing, 7-21 days.<br />
at 21 degrees C.<br />
6. Extremely high bond strength Low bond strength.<br />
to steel and concrete.<br />
7. No components to measure. Must adjust water for<br />
flowability & strength.<br />
8. Epoxies can be poured from Must be pumped in<br />
0.6 cm - 45.7 cm thick in one layer. tight clearances.<br />
Advantages of Epoxy Grout<br />
1. Usage in corrosive and<br />
external applications.<br />
2. Limited down time during<br />
outages and emergencies.<br />
3. High bond strength dampens<br />
vibration thus extending the life<br />
of machinery components.<br />
4. Excellent flowability insures<br />
maximum bearing contact.<br />
5. Support by local distributor<br />
in all aspects of grouting.