Download a PDF - APC Auto Parts Centres

$38. 95
LIS-13800
Water Pump
Sprocket
Holder for GM Ecotec Engines
Holds the timing chain and gear in
place while removing or installing
water pump.
$36. 95
LIS-26280
10-Piece Master
Female Torx Socket Set
From E5 to E20, in 1/4", 3/8" and
1/2" drive sizes.
$129. 95
LIS-34400
Exhaust/Tailpipe Stretcher
Stretches pipes including stainless
steel from 1-5/8'' to 2-7/16''.
LIS-17350
Exhaust/Tailpipe
Stretcher Kit
Stretches pipes
including stainless
steel from 1-5/8" to
4-1/4".
$72. 95
LIS-38210
Hub Remover Kit for Dodge
Separates the frozen hub assembly
from the steering knuckle on Dodge
vehicles.
$42. 95 $47. 95
LIS-43600
Universal Fan Clutch Wrench Set
• For use on most popular
applications
• Hooked wrench will hold bolted on
water pump pulleys
• Double-sided spanner style
LIS-59000
wrench will hold pressed on pulleys
on many GM, Jeep and
Ratcheting
$79. 95
$189. 95 $229. 95
Dodge vehicles
• Double-ended turning wrench with
36mm and 47mm/1-7/8 openings
and 1/2" square drive holes for
use with a hand ratchet or a
breaker bar
$259. 95
Serpentine Belt Tool
Includes 13, 14, 15, 16, 18mm, and
also 19mm socket for Honda and
$19. 95
$47. 95
Toyota applications, extension, 3/8"
& 1/2" square drives.
LIS-26000
8 Piece Tamper
LIS-46600
Resistant Torx Bit Set
Universal Inner Tie Rod
• 1/4" Hex insert bits with 1/4" drive Wrench
bit holder.
Removes/installs inner tie rods LIS-18000
• T-10 to T-40.
equipped with a completely round Universal Camshaft
Oil Filter Pliers
end socket up to
1-31/64". Also fits inner tie rod Bearing Tool
LIS-50750
sockets with flats.
• Drives camshaft bearings
2.25" to 4" $34.
smoothly
$44. 95
95
• 1.125" - 2.69" (28.58 - 68.3mm)
LIS-50950
3-5/8" to 6"
LIS-69000
Dual Drive Stubby
“Swivel Grip”
Metric Hex Bit Set
Truck Filter Wrenches
• 1/2" / 1" drive
LIS-45750
• 10, 12, 14 and 17mm
7 Piece Inner Tie Rod Tool Set
1-1/4'', 1-1/2'', 1-3/16'', 1-5/16'',
1-7/16'', and 33.6mm.
$30. 95
LIS-68130
$95. 95 Wheel Weight Tool
• Removes, trims and installs clipon
wheel weights
For Cummins & Detroit Diesel
LIS-54200
• Also includes lever and offset flat Engines
tip for removing wheel covers
LIS-70500
4-5/16'' to 4-3/4''
Tap Socket Set
Set of 8 sockets fits all
$13. 95
numbers, fractional and metric taps
$64. 95 from 1/8" - 1/2" (12mm).
LIS-54300
$40. 95
For Caterpillar Engines
$139. 95 5-1/4'' to 5-3/4''
$14. 95
LIS-46800
$31. 95 Master Inner Tie Rod Tool Set LIS-41400
29mm, 1-3/16", 1-1/4", 32.5mm,
1-5/16", 33.6mm, 1-3/8", 1-7/16", Stepped Pickle Fork Kit “Swivel Grip”
and 1-1/2".
Step design helps keep tool from
LIS-70940
bouncing back. For separating ball Oil Filter
3 Piece Tap Socket Set
joints, Wrenches
• For large sizes.
other tie rods, Pitman arms and
• For 5/8", 11/16" 3/4", 16mm and
11/16" uses. Includes 1-1/8", 15/16",
18mm.
handle.
forks, pneumatic driver and
$54. 95
LIS-53250 LIS-53500
Large Standard
4-1/8'' - 4-1/2'' 3-1/2'' - 3-7/8''
LIS-38350
LIS-43300
$11. 95 $9. 95
Exhaust Removal Pliers 7 Piece Pneumatic
LIS-41500
Works on all domestic and import Fan Clutch Wrench Set
Pickle Fork Kit
LIS-53700 LIS-54400
car and truck exhaust systems that to Remove & Install
For separating ball joints, tie rods, Small Extra Small
use the rubber hanger supports. Fits Ford, GM and Chrysler.
2-7/8'' - 3-1/4'' 2-3/8" - 2-5/8"
$24. 95 Includes: 41mm, 42mm, 36mm, 1-7/8" 1-1/2", and 1-9/16",
Pitman arms and other uses.
2".
Includes 1-1/8", 15/16", 11/16"
forks, pneumatic driver and handle. $9. 95 $9. 95
128
2 mars au 26 avril 2013 • March 2 to April 26, 2013