RBL 28 Manual.indd - Connecticut Shotgun

BEFORE LOADING – Place the safety “on” and
select the barrel you wish to fire first by pushing the
gold shift lever button in the trigger to the right to fire
the right barrel first and to the left for the left barrel. A
second pull of the trigger will fire the other barrel.
TO LOAD – Place the safety in the “on” position.
Push the top lever to the right to unlock the breech.
Push down on the barrels to open the action. As
desired, insert a shell into the chamber of the barrel
chosen to be fired first or both.
TO FIRE – Firmly shoulder the gun. Push the
safety forward to the “off” position and when on target
pull the trigger. The second barrel may be fired by
simply releasing and pulling the trigger again.
TO UNLOAD OR TO REMOVE THE FIRED
SHELLS – The RBL will briskly eject the fired
shells and will extract unfired shells far enough to
permit easy removal by hand. Push the safety to the
“on” position. To avoid being struck by an ejected
fired case, direct the breech end of the barrels away
from you before opening the action.
When through shooting always put
the safety “on”.
NEVER STORE A LOADED GUN.