backpack sprayers - Minnesota Wanner Co.

T E E J E T ®
- L O W- P R E S S U R E F L AT S P R AY T I P S
65°,80° & 110° LP Series
Stainless Steel and Brass
• Less clogging
• Longer wear life
• Larger droplets to reduce drift
How to order:
Example: TP8002LP-SS (Stainless Steel)
TP6505LP (Brass)
Accessories
The LP TeeJet ® spray tips are designed specifically to operate as low as 15 PSI, providing the same spray
performance, spray angle, flow rate and liquid distribution at 15 PSI, as the standard TeeJet ® tips at 40
PSI. Lower operating pressures and larger orifices increase wear life of tips. This helps to diminish
clogging problems and provides larger spray droplets than those from the standard tips. Patented orifice
inlet design provides good tapered edge liquid distribution at lower pressures.
See capacity chart on page 106
C O N E J E T ®
- # 5 5 0 0 A D J U S TA B L E S P R AY T I P
Adj.
ConeJet
Tip No.
Liquid Pressure in PSI
Performance 20 PSI 30 PSI 40 PSI 60 PSI 100 PSI
150 PSI
A B A B A B A B A B A B
Capacity-GPM – .049 .015 .061 .017 .07 .02 .086 .025 .11 .028 .14
5500-X1 Spray Angle – – 38° – 54° – 71° – 80° – 83° –
Max. Throw-Ft. – 19 1 22 1.5 24 1.5 26 1.5 26 1.5 26
Capacity-GPM .025 .091 .03 .11 .033 .13 .04 .16 .05 .20 .058 .25
5500-X2 Spray Angle 40° – 60° – 68° – 75° – 80° – 83° –
Max. Throw-Ft. 1.5 23 1.5 26 2 27 2 28 2 28 2 28
Capacity-GPM .037 .13 .045 .17 .05 .19 .058 .23 .073 .30 .088 .37
5500-X3
Spray Angle 57° – 68° – 72° – 76° – 80° – 82° –
5500-PPB-X3 Max. Throw-Ft. 2 27 2 30 2 31 2 31 3 31 3 31
Capacity-GPM .05 .18 .058 .22 .067 .25 .08 .31 .10 .40 .12 .49
5500-X4 Spray Angle 61° – 70° – 73° – 77° – 80° – 81° –
Max. Throw-Ft. 2.5 30 2.5 33 3 34 3 34 3 34 3 34
Capacity-GPM .061 .21 .076 .26 .082 .30 .10 .37 .13 .48 .15 .58
5500-X5
Spray Angle 61° – 70° – 74° – 77° – 80° – 81° –
5500-PPB-X5
Max. Throw-Ft. 2.5 31 2.5 34 3 35 3 35 3 35 3 35
Capacity-GPM .073 .26 .087 .32 .10 .37 .12 .45 .15 .58 .19 .71
5500-X6
Spray Angle 65° – 71° – 74° – 77° – 80° – 80° –
‘
Max. Throw-Ft. 2.5 32 3 35 3 36 3.5 36 3.5 36 3.4 36
Capacity-GPM .097 .33 .12 .40 .13 .47 .16 .57 .21 . 74 .25 .90
5500-X8
Spray Angle 66° – 71° – 74° – 77° – 80° – 80° –
5500-PPB-X8 Max. Throw-Ft. 3 34 3 37 3 38 3 38 4 38 4 38
Capacity-GPM .12 .42 .15 .52 .17 .60 .21 .73 .26 .94 .31 1.2
5500-X10 Spray Angle 68° – 72° – 75° – 78° – 80° – 80° –
Max. Throw-Ft. 3 35 3.5 38 3.5 39 4 40 4 40 4 40
Capacity-GPM .15 .49 .18 .60 .20 .69 .24 .84 .31 1.1 .38 1.3
5500-X12
Spray Angle 69° – 73° – 76° – 78° – 80° – 80° –
5500-PPB-X12 Max. Throw-Ft. 3.5 36 4 39 4 40 4 41 4 41 4 41
Capacity-GPM .17 .55 .20 .67 .23 .78 .29 .95 .37 1.2 .45 1.5
5500-X14 Spray Angle 70° – 74° – 76° – 78° – 80° – 80° –
Max. Throw-Ft. 3.5 37 4 40 4 41 4 41 4.5 41 4.5 41
Capacity-GPM .21 .69 .26 .84 .30 .97 .37 1.2 .47 1.5 .58 1.9
5500-X18
Spray Angle 71° – 75° – 77° – 78° – 80° – 79° –
5500-PPB-X18 Max. Throw-Ft. 4 38 4 41 4 42 4 42 5 42 5 42
Capacity-GPM .26 .83 .32 1.0 .37 1.2 .45 1.4 .58 1.9 .70 2.3
5500-X22 Spray Angle 71° – 75° – 78° – 79° – 80° – 78° –
Max. Throw-Ft. 4 39 4.5 41 5 42 5 42 5 42 5 42
Capacity-GPM .31 .98 .37 1.2 .43 1.4 .53 1.7 .68 2.2 .83 2.7
5500-X26 Spray Angle 72° – 76° – 78° – 79° – 80° – 78° –
Max. Throw-Ft. 4.5 40 5 42 5 43 5.5 43 5.5 43 5.5 43
#5500-PP
The 5500 Adjustable
ConeJet ® tip is also available
in a polypropylene
version. The polypropylene
tip has the same performance
characteristics as
the brass tip and provides
excellent chemical resistance.
This tip’s light
weight makes it well-suited
for use on hand held
and backpack type
sprayers.
#5500 for
Capacities from
0.071 to 1.9 GPM
Knurled body of tip rotates
through a half turn to provide
spray selection from wide
angle, finely atomized cone
spray to a straight stream
spray. Tip settings “A” and “B”
represent two extreme points
of rotation in tip adjustment.
TIP SETTING “A”
CONE SPRAY PATTERN
TIP SETTING “B”
STRAIGHT STREAM SPRAY PATTERN
Spray Spray
Angle Angle
Maximum Throw – Feet
1-800-247-4998
Maximum
Throw – Feet
147