performance accessories - Mazdaspeed Motorsports Development

● Stabilizer Bars
Stabilizer Bars are hollow construction to increase
steering response and reduce body roll. Front bar is a
27.2mm diameter with 4.0mm wall thickness. Rear bar
is a 17.3mm diameter with 2.6mm wall thickness.
Front - Hollow QSEA-34-151
Rear - Hollow QSEA-25-151
■ Cold Air Intake
Bring cold air from outside the engine compartment into the engine through
mandrel bent, 3.0" diameter, polished and powder coated aluminum tubing.
The intake system is designed for improved engine breathing, while re-using
the stock MAF sensor. Kit includes washable and reusable conical filter. The kit
is emissions-legal in all 50 states. Check with your MAZDASPEED Dealer for
current applications
Cold Air Intake GRMS-8M-K30
Sport Exhaust
Sport Exhaust is designed to reduce back pressure
and increase flow. Single Muffler OE Style maintains
OE sound, while Dual Muffler Style has a more
aggressive sound.
■ Lightweight Dual Muffler Style GRMS-8M-K06
● Single Muffler OE style QSEA-40-100A
The ultimate in sports-car performance meets
the ultimate in race-inspired accessories.
● Sport Springs
Reduces the ride height by 20mm.
Increased spring rates result in enhanced
steering and improved cornering.
Sport Springs (Set of 4) QSEA-34-01Z
● Sport Dampers
Sport Dampers have increased damping rates to
match the MAZDASPEED Sport Springs, QSEA-34-01Z
Front (2 required) QSEA-34-700
Rear (2 required) QSEA-28-700
■ Lightweight Flywheel
Lightweight Flywheel allows the engine to rev quicker.
Manual transmission only. Weight: 6.92kg.
Lightweight Flywheel QSEA-11-500A
▲ Coil Over Suspension
Ride height adjustable between 20mm and
50mm lower than stock. Spring rate increased
up to 90% over stock depending on vehicle
model. Dampers have single knob adjustment
for rebound and compression.
Coil Over Suspension RAMS-8M-K01