Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Output from the machine<br />
The next fourteen pages show the machine’s output for specific settings of the amplitude bars on the rocker arms. In generating this output the<br />
machine was set to use cosines, except for the results on page 89 where sines were used.<br />
Pages<br />
76–77<br />
78–81<br />
82–85<br />
Description<br />
Cosines for all of the twenty frequencies that the machine can produce.<br />
The amplitude bars are set on the rocker arms to produce four different types of square waves.<br />
A cosine is sampled at twenty points and placed on the rocker arms. The twenty points<br />
span two periods, one full period, half a period and a quarter of a period.<br />
86–88<br />
89<br />
Arbitrary values are set on the rocker arms.<br />
A square wave is set on the rocker arms, but here the machine is set to calculate with sines.<br />
10<br />
Amplitude<br />
0<br />
−10<br />
1 5 10 15 20<br />
Rocker arm<br />
This set of amplitudes ... ... is placed on the rocker arms ... ... and produces this output on the front of the machine.<br />
75